Samsung Galaxy 7.0 plus (gt-p6210) will not boot. It hangs at the Samsung banner. The banner is still glowing but it goes nowhere.
I have tried everything.
a. Delete cache (dalvik and otherwise)
b. System wipe.
c. Removed add on sim and repeated above.
I have a rooted ICS (original install via Kies).
View 1 Replies
as written in my profile, my tablet is an Samsung Galaxy Tab 3 running Jelly Bean.
Which version do i have for my tablet? will there be any updates soon?
i m also facing the problem that my tablet hangs sometimes without notice. This happens mostly when i try to start games like Candy Crush and similar.
I am trying to port a kernel from one zte 8960 to another. I have cwm recover set up with kexec to get a log of what is going on. the kernel hangs at boot of the phone so I trying to find the cause
-last_kmsg after a failed boot of 3.4
pastebin.com/0AGpACsT
-last_kmsg after a boot of 3.0.8
pastebin.com/N3WtDHwC
-split-boot of boot.img
Code:
output directory: fi
boot_magic correct: ANDROID!
kernel size: 6045264
kernel address: 2149613568
Base: 2149580800 (hex): 0x80200000
[code]....
I am thinking it might had hit "un-allocated" memory area, I did have to change the ramdisk_offset from 0x01300000 to 0x02000000 make the kernel fit. what could I do to check to see if it is un-allocated space I am dealing with
I used Rom Manager on my Samsung galaxy Ace to backup my rom but it instantly shut down, now it will not boot up at all and i can't even get into recovery mode?
View 9 Replies View RelatedI have a samsung galaxy young s6312. My phone has stock android 4.1.2 jellybean. I rooted it with framaroot using gandalf exploit. Its been 2 days since I rooted my phone, and it has freezes four times in these two days. By freezing, I mean that when I am playing a game, it suddenly stops responding and the screen goes black. I have to take the battery out and reinsert it. This never happened to me with my non rooted phone.
View 4 Replies View RelatedI have a bricked Samsung Galaxy S2 and have been doing some research on how to fix this. There is a lot of info online, but I don't understand most of it as it is too technical and I need having it translated into layman's terms!
Context:
- Galaxy S2 (GT-I9100)
- Unlocked
- Purchased from Kogan 2 years ago (no longer under warranty)
- Appears to be Polish stock based on the packaging and manual
- I am in Australia
Problem:
- Phone is stuck in boot loop, unable to get past the intro flash screen that says Samsung Galaxy S2 GT-I19100.
- It keeps resetting itself and going back to flash screen infinitely. I need to remove the battery in order for it to stop doing that.
- I'm unable to get into the mode that would allow me to do a factory reset, however I am able to get into download mode.
What I think I need to do, but need verifying:
- Download Odin onto my PC. (I think Odin is software that allows me to access the core of the phone via my PC, is this correct?)
- Download the correct version of the operating system. From what I can gather, there are different versions depending upon which network you are with. Because my phone is unlocked, I need to get an unlocked version but I'm not sure whether I should get one designed for Australia or for Poland (or whether it matters)?
- Connect PC and phone via USB cable
- Turn on Odin
- Somehow use Odin to reinstall O/S on my phone
Questions:
- Are the steps above correct or am I missing something?
- Does it matter which version of Odin I install or can I just do a google search for Odin downloads?
- Where do I find the file I need to reinstall the O/S?
- Where can I find instructions on how to use Odin once I have the correct file to install?
i was trying to update my SGS2 to ICS by myself using Odin, but something went wrong and now i can not get the phone start at all . and i get an icon for a phone and a PC and a warring triangle to show me that the connection is lost
View 6 Replies View Relatedi bought a white Samsung galaxy tab 4 7.0 8gb white from Canada and i decided to turn ART on so i did and the tab was stuck on the boot animation for over 30 minutes. So i went into recovery and deleted cache and data. It booted up fine and i was relieved. Before i did anything on it i turned on ART again and it boot looped again, stuck at the boot animation. This happens every time i turn ART on this tablet. No i am not rooted and i don't have any custom ROM, kernels, or recoveries on this tablet. try turning on ART on their galaxy tab 4 7.0 and see if ART works?
View 9 Replies View RelatedI dropped my Samsung Galaxy Attain 4G from a height of about 3 feet onto a marble floor. The battery popped out, but there is no physical damage as far as I can see. The phone automatically went into a reboot loop, by which I mean it flashes the "samsung" logo again and again. It doesn't turn on or off. After removing the battery and sim card several times to no avail, I searched some of these forums and found the 3 key combination (volume/power/home) which can be used to get a factory reset. Now, I have gotten that factory reset screen where I can scroll using the volume key, but my phone stays on that screen for about 4 seconds before reverting back to flashing "samsung." This is where I stand as of now.
View 3 Replies View RelatedMy Galaxy pocket wont turn on.Last 4 days I dropped my phone on our pail full of water on our garden. I didnt noticed it.I keep searching for it in our house but no hope. Last 2 days I found it and tried the rice technique to make it dry again. Today It wont turn on and I cant charge it. I borrowed the battery of my friend's SGP and my SGP turned on. But I tried my SGP battery on my friend's phone but my friends phone wont boot.My Smartphone: Samsung Galaxy Pocket (GT-S5300)
-Stock Firmware
-Rooted
-with CWM recovery
will i need to replace the battery?
I have messed up big time! I rooted my phone perfectly fine and everything. But when I tried to install a new ICS rom and rebooted, my phone showed the samsung logo followed by a screeching frequency noise, followed by a restart. This process continues forever. I really hope I didn't break my phone.. I can access the CWM btw.
View 2 Replies View RelatedI Have Rooted My Device And Installed ChianFire 3D And Device Have Restart And Not Booting Ihave Reset User Data In Factory Mode [Home+Vol Up+Power] But This Not Work
View 1 Replies View RelatedI bought this phone whilst on a business trip In Shenzhen china.
It's was running 4.2.9 jb. 2gb ram 16gb rom 5" screen 1080p
I put 3d chain fire on it and now it's stuck in the boot animation.
I borrowed my friend phone, same as mine and loaded up mtk droid and it generated a backup of his phone with loads of files system folder, boot.img etc
It then packed it up into a zip file. From there I thought I could put the zip file on an sd card and boot into recovery and delete the data / cache and them select install from sd card.But the installation failed
Yesterday i tried updating my android to Ice Cream Sandwich following some tutorial i found but i missed a step and didn't downloaded Clockworkmod Recovery or made any backup , and i think that USB Debugging is off because my pc doesn't recognize the phone ... I tried going into Android system recovery and clearing data and cache , and i tried with odin mode by pressing volume down, home and power but i got stuck on downloading screen for 2 hours so i gave up ... Now only thing left on my sd card is ics aura rom..
View 3 Replies View RelatedI have flashed a rom but now my cell just stay on samsung logo I can't access cwm recovery I don't know why i tried install again but dont work and i have tried to install the stock rom and another rom by odin
View 1 Replies View RelatedI have a problem with a Galaxy S2 Mini. The phone doesn't boot, it only shows the first Samsung logo and then the Samsung Galaxy S2 mini text, but after that, the screen turns black and the phone does only vibrate. Is there anyway that I can reset my phone (erase all data??). I also cannot connect the phone on my computer (It doesn't show anything in My Computer on my PC)
View 1 Replies View RelatedMy samsung i5500 wont boot normally so I want to try booting it into recovery and resting it. I've tried power, center key and volume down. which I thought was the recovery combination but it just comes up with an icon saying downloading and does nothing. Any recovery combination or another way to fix.
View 9 Replies View RelatedI am stuck in boot screen in Samsung Galaxy note 3 after rooting with three lines of text on top saying
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
Samsung
GALAXY Note 3
SM-N9005
More details: I used CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 with Odin3 I tried to root two times
Android Version: 2.2 [Optional]Are You rooted & which Rom: Rooted and flashed to "[ROM] Official 2.2 (HTC 2.09 and 2.10): busybox, A2SD+, TUN, EXT4, Undervolt, SYSRW"
Issue: I've flashed to another ROM and now want to restore my back-up that I made via Clockworkmod. The restore seems to do fine, but when I reboot my phone hangs at the boot screen.
In the meanwhile I have flashed the recovery from clockwork to AmonRa. To restore the clockwork back-up, I boot into clockwork recovery via ROM Manager. Maybe I should reflash to clockwork, but that didn't work till now.
How to get a banner image in Google Now, something like this below:
View 5 Replies View RelatedRecently some of my classmates locked my phone by trying to guess my pattern. This forced me to enter my sign into my googlemail account to unlock my phone; however, it was telling me that my username and password were wrong, even though I could log on on the computer into my googlemail account; I tried all the passwords ever set.
So I then decided to run a factory reset, so I wiped all the data, and then went to "reboot system now". It goes the the loading screen saying "GT-I5800 Samsung", but then goes back to my Android Recovery System. No matter how many times I click on "Reboot system now", it reverts back into a loop.
I have never tampered with the information on my phone, I have had this phone for 3-4 years at the moment and it was working fine, as it had never become locked before, so it is unlikely that I can return it.
I got one of the new vibrants that won't boot into recovery. Only the batches before august allow you to getting into recovery by holding vol up and down. I confirmed with t mobile that this a true statement, so i need another way in but cant figures it out i tried adb but it wont work either.
View 2 Replies View Relatedmissing possibility to set the Cover Banner in Google Music.
I bought this song legaly over Amazon mp3 so the ID3 Tags are correct.
Phone fails to boot even after leaving for and hour and both two and three button reset do not work.
View 1 Replies View RelatedI tried flashing my Galaxy S, but when i turned it on, it stayed on the boot menu for 10 minutes and nothing happened, so i had to remove the battery. I tired putting it in download mode and it didnt work eiter. When i plugged in the usb, it showed the charging icon with the loading sign, however the loading sign did not go away, again I had to remove the battery. What is wrong with my Galaxy S, and what can I do to fix it?
View 7 Replies View Relatedi've been scouring all over to find a way to change the boot animation for the latest nightly of GAOSP, or for any Galaxy ROM for that matter. i've gotten a few apps from the Market, but aren't completely sold on their custom animations. since most of the custom animations i like are for other devices, what do i need to alter in the desc.txt file in order to get them to work? can i just download any zip that i do find that i like and just replace the file and reflash the GAOSP ROM?
View 10 Replies View RelatedI have a big problem with my Galaxy S immediately after upgrading to the JPM/Froyo firmware. Immediately after the update the phone attempted to reboot, and now stays on the Galaxy S logo way too long before the screen goes blank and only the bottom two buttons are illuminated. And it just stays like that. I have a feeling that it might have something to do with the OneClickLagFix that was installed on the phone; maybe the upgrade didn't like the lag fix being there. Also, on pressing VolumeDn, Home and Power to get the recovery screen, the screen is replaced with a yellow "Downloading. Do not turn off Target!!!" splash. So there are no recovery options.
View 11 Replies View RelatedI think it's time I turn to the forums with this issue if I'm ever gonna get GAOSP fully working on my device.BEHAVIOR: The two latest Nightlys I've flashed have given me a 3g-symbol and working connection on either the first boot (without gapps installed) or the second, after installing gapps. The problem is that over consecutive reboots (to change themes, settings, just to try etc.) the 3g-data rarely returns. I have been rebooting the device for 20 times in a row without getting it to connect to 3g-data. Using the *#*#INFO#*#*-menu and "enable data connection" doesn't work. Changing to WCDMA-band only may help with frequency of working reboots, but it's hard to tell. Some times (on some combinations of ROM/baseband) switching airplane-mode on/off has worked.
OBSERVATIONS: What I have observed is happening is that whenever 3g-data isn't working, the APN-list i empty. If I create a new APN it will not show after I have pressed save. If I reboot until i get 3g-data again, the new APN will show up together with the original ones. I've had this problem occur with many different ROMs from what I can remember, but to vastly varying extents.
There seems to be some connection to baseband too, because even on galaxo 1.6.3.4 I've had lots of problem with anything newer than II5, or even newer than IH8 to be completely stable, until I used jakax 3g-fix: Fix 3G/UMTS network interruptions with donut and JC6 AMSS. Since then I have been using JC6 with Galaxo 1.6.3.4 and only losing 3g-data on 1 of 5 reboots or so. jakax's fix Isn't for this problem though, so I've no idea why it helps!?I've heard some others having similar problems, but most seem to have been solved in some update or they sold their devices or something, because no thread has come to any solution really. My device was one of the first and bought from Germany and is being used in Sweden, could this affect it it any way? I have seen some threads of problems with android APNs disappearing when certain MNC-numbers are entered, but I never found any explanation or solution there either.
So this morning i was installing kies onto my laptop so that I could transfer some videos and photos from my galaxy to my computer from my friends birthday. it didnt work and (kept saying the device connected to my usb port has malfunctioned on my computer) so i restarted and phone thinking it just needed a reboot and now it wont go past the S loading screen.
Is there anyway I can get into the phone and get the videos and photos from it? They are from a friends birthday and they're very important because they moved away! any help would be greatly appreciated.
what Ive tried several times already is removing the battery and restarting and no go. Ive turned the phone onto samsung recovery mode and it says:
CODE:........
And of course it gives me the options to:
CODE:.......
what wipe partition cache do?
I just tried to load the GalaxoSense Theme to Galaxo 1.6.1, and now my phone won't boot. I'm in the process of flashing with Odin, and I'll let you know how that goes, but what is the proper procedure for applying a theme?
View 9 Replies View Related