I just purchased the Fascinate and I love it. I'm trying to transfer my music and photos from the vcast application on my computer to the phone. I loaded the application on my computer and searched for the music and pics. That worked fine. When I plug in the phone, the computer doesn't see the phone. USB issue.
View 15 Replies
I would like to upload videos from my computer to my SF. I'm using Salling to do the same thing with my music but was wondering what the easiest way is for videos? Is there even a video player on the SF? What file formats will it recognize? This is a very important feature to me and I'm surprised it isn't very intuitive.
View 2 Replies View RelatedWhile playing around with Titanium, I was prompted to enable USB Debugging. I remembered having turned this on pre-2.1 for PDANet. However, when I plugged my phone into my PC via USB, it didn't recognize it. So I thought maybe I'd reinstall PDANet to get whatever drivers it loaded to use the USB in Debug mode. I did that, and installed the Samsung USB driver it says to install, but it keeps telling me during PDANet install that it doesn't have the driver. Anyone have any advice here?
View 7 Replies View Relatedi'm using a UK O2 samsung galaxy and i'm trying to upgrade the firmware on it (hopefully to improve battery life).However when i plug the phone into my laptop the NPS software doesn't recognise that there is a phone attached and instead tells me i have 2 mass storage devices connected (an F and an E drive).Does anyone know why this might be? and more importantly how to fix it so i can do the upgrade?
View 9 Replies View RelatedOkay, so if you are freaking out, or can't figure out why your new Epic isn't being recognized by your computer, calm down. Some of you are probably already searching for drivers. Ya I already went through that freak out when I got my Vibrant. Okay, to mount your phone, and have your computer recognize the internal/external memory, do this:Connect your phone to your computer via USB. Give it a few seconds.Next, PULL DOWN your notification bar. Next, tap your finger on "USB CONNECTED"You then get a message asking if you would like to mount. Tap "mount" confirming you would like to do so.Enjoy, your computer should now recognize the internal/external memory.BTW, reverse this process before pulling the usb cable out. Always remove a cable safely, otherwise the data can get corrupt. Don't just yank your cable out.Edit: some of you may also find the following useful. Hopefully the Epic is similar to the Vibrant in these setting
View 41 Replies View RelatedI just updated my S3 to 4.3 (my network is 3 - UK) and the phone is so slow! All programs crash after a few minutes of going onto them. I keep getting messages like "unfortunately the process com.android.phone has stopped".
Also I have no mobile network!! Everytime I click on mobile data is tells me to "insert an active sim to access network" but when I put the sim in my brothers phone the sim works.
I really don't want to do a factory reset as I have a lot of internal things saved such as pics and whatsapp conversations that I really need!
Is it possible to go back to 4.2?
I used the recovery mode first time - it worked, second time playing with NoBloat - it gets stuck in boot screen.I can go to the recovery mode menu, both chinese and english, can do a full clear cache, data, format, but phone still won't boot.
I can use ADB shell, but Smart phone flash tool does not recognize phone, MTK droid tool recognizes it, but I can't backup it.
When i put files on my SD card. Android doesn't see the files right away. Most of the time after a couple of boots. This is really irritating me. I unmount the device but still no files. Does someone have the answer for this?
View 5 Replies View RelatedWhen I computer either a) the drive doesn't show in my computer or b) the drive shows up for a minute but then crashes with no warning. I just got my Hero so I'm trying to transfer music from the computer to the phone but am unable to do this if I can't access the SD card. any suggestions?
View 5 Replies View RelatedI hope some one will be able to help me. I just got my x10 mini pro today. The SD card delivered with the phone works, but is not large enough for map data. So I wanted to use a bigger card 8 gb. It's a new card, but the x10 mini doesn't recognize it. What can I do? How can I solve this problem? The card is not broken, I can use it in my nokia and read it on the computer.
View 5 Replies View RelatedI have my Droid connected to my computer via the USB that came in the box. The phone recognizes the cable, chimes, and has the USB icon on the screen. But the computer doesn't recognize the phone at all. It could be a problem with my computer, but I'm checking here in case I just can't find the option on the phone to "allow USB connection" or something.
View 8 Replies View RelatedI have free space on the internal memory of my phone that is not recognized for things like installing an app.
This is my phone:
Model: Motorola XT919
Android version: jelly bean 4.1.2
Internal memory: 4gb (really 2,2 gb free since the rest is used by the OS)
Rooted: Yes
I found out about this problem because I was running out of internal space so I inmediately checked the storage settings and I found this:
In the installed apps settings it shows 766 mb free of internal space But in the storage settings the things are different: As you can see, this time I only have 127 mb free of internal storage....
Just to be sure, I downloaded the app Storage Analyser and once again checked the internal storage free space: And this time shows 1,52 gb free...
Well the thing is that my phone considers as free space just the 127mb shown on storage settings, and I want the phone also uses the free space shown on the app settings or the one shown by storage analyser.
I've downloaded the galaxy s drivers, but after running the setup file, it doesnt recgonize the phone in either ADB mode or hard drive mode.
View 8 Replies View RelatedA lot of the materials I've found mention that the Galaxy S line includes an FM tuner, but I've also seen that the Captivate doesn't seem to have it. Can someone who's used the phone clarify whether the Fascinate will come with one?
View 2 Replies View RelatedMy gps locks on in like 3.2 secs which makes this like the GT-R of phones. However, the gps doesn't ever get closer than 2200 meters.
View 11 Replies View RelatedMy EVO is acting up. It was working fine one day, I could take pictures, listen to music on my SD card, etc, but then out of nowhere, the phone does not see the SD card. The phone says "Removed SD card. SD card removed. Insert a new one." I have tried removing the SD card, then starting the phone without the SD card, then putting the SD card back in, but it still doesn't recognize the card. I cannot mount the phone as disk drive in my computer (I do not even have the option). Has this happened to anybody else? Does anybody know what I can do to fix this?
View 1 Replies View RelatedAnyone else have this issue? Was trying to use Double twist and the Mac wont even recognize it in any modes Mass storage or any other
View 10 Replies View RelatedMy milestone doesn't recognize its being plugged in, i.e. i cant charge it. If it the screen is off and i plug in the usb it lights up but wont charge, ive tried two different usb cables and from mains adapter (with/without dock) and from the PC. Anyone else have the same problem?
View 3 Replies View RelatedMy problem is my computer stopped recognizing my tablet as a removable device through the USB cable. I've tried every solution, like going into device manager uninstalling all the usb drives etc... I even downloaded a program to see all the usb connections. Still nothing. There is no problem with my USB ports because I can charge my tablet through USB but my PC just doesn't pick it up. I've changed the MTP and PTP settings as well.
I'm pretty sure it started after I paired my tablet to PC over bluetooth. I think that's what caused the problem. Maybe my PC want's bluetooth to trump the USB connection (even with bluetooth turned off on my device)? I tried google searching but I'm not having much luck.
I tried my wifes laptop and hers picks it up, so I've narrowed the problem to my PC.
So, this is what I did - fiddled around with the phone a bit before finally deciding to install HTC Sync.Downloaded the latest version (3.x) from HTC's website. The software and drivers installed without a problem.The device, however, was not recognized by Sync. Try as I might.Tinkered with the settings in the handset, too - eg. prompt to choose function (I don't even get a prompt when I connect the USB!), checked debugger mode, et al.The phone continues to charge; and that's the only thing that happens.I am running Windows XP (32 bit), SP3. (While downloading the software from HTC's website, I had chosen the option 'Asia no use.I went a step further - by trying to install the older version (2.0.28). Found it on the internet.
View 7 Replies View RelatedI pluged it to my pc today to transfer some videos that i took with it but for my surprise my pc did not recognize it neither did the window poping up appear to asked me if i wanted to use it to charge only, disk drive, htc sync etc I dont know what went wrong cus it used to work fine the other days I also checked the settings and the ASK ME option is checked.
View 1 Replies View RelatedI tried to download a gaaps file and I think it was the wrong one because I ended up completely deleting my OS. The battery fell out and now I'm unable to get into recovery mode. I can get into odin mode, though.My computer doesn't recognize the device when I plug it in, either.
View 5 Replies View RelatedAfter successfully sorting out all the troubles of connecting SGS to KIES, and been using it happily for almost a month, now I'm facing another trouble which is quite big this time. Windows Vista (32-bit) and Windows 7 (64-bit) can't recognize the phone when connected through the USB. Got a message says the USB Device/Hardware Is Not Recognized. I'm using the SGS original cable. The cable was working perfectly and now suddenly it doesn't work in data mode but still able to recharge the phone battery. Am I having a cable problem? Or worst, the USB connector (on the phone) problem? I tried to clean the USB connector on the phone but still can't connect the phone to my computers.
View 2 Replies View RelatedI'm trying to root my phone, but can't do that if the PC doesn't connect to the moment. I keep seeing the first instructions to root is download Samsung USB driver v.5.2.0.0, but nothing happens when i install that. I'm stuck now, I'm sure it's just something simple.
View 2 Replies View Relatedi got the drivers working and adb recognises it. now odin wont recognize the phone!!! do i have to put in download mode?
View 8 Replies View Relatedwhy Rom manager doesnt recognize the ClockWorkMod 5.0.0.8 installed on htc sensation 4G??? if i click download Rom or backup Rom it tells me that i need the clockworkmod installed first , but i already have it.
View 2 Replies View RelatedI tried to charge my updated phone (baseband I7500XXIG8) on both car lighter charger and third party micro usb charger. When connected, the phone did not recognize that it is being charged at all - but after a while I noticed that the battery widget did show more percentage than before. Even after disconnecting, the percentage varied up and down few percent - from 80% to 85%, then (after heavy usage of 3G, wlan, gps...) jumped to 50%. The rest of discharge was also erratic, i.e. in no way was it smooth discharge curve.
I attribute this to firmware - I don't believe that my chargers cannot supply enough mA or too low voltage and that the phone does not detect it;
After discharging the phone completely (it shut down at 1%, interesting it did not want to turn on 3G under 5%) I charged it with the original charger. After ~20 minutes of charging the battery was on 55%, isn't it a bit too fast?
I'll try to cycle it few times now.
I also guess that this kind of "uncontrolled" charging can at least uncalibrate the battery if not even damage it...
This is totally unacceptable given the already bad or erratic power performance of galaxy. Not being able to charge it the car makes it unusable.
I never heard of such problems with other microusb-charged devices...
Since Android supports styles and it's good practice to use them (similar to CSS), I made a new style and applied it to 3 buttons.
The Layout builder in Eclipse did not register the changes and either broke (showed nothing) or didn't apply styles at all.
After running the app in the emulator, styles are correctly applied.
So is there something I'm missing or the Android plugin doesn't support styles?
I usually send out group emails on my computer so I thought id set it up on my razr. I got the group set up under contacts without any flaws. I go in to send an email to the group and it had them all set up for me nice and neatly. Then it asks me for an account and gmail isnt even an option.
I really dont want to have to add my gmail account under the email accounts section then id have two email apps if you know what i mean.
Do most people use The gmail app or just the email app?
In the presence of usb cable if i remove battery from the device and put it back ,the device is not recognizing the battery. but from the kernel log i can see the battery charging event at the time of inserting the battery back and after that if the usb cable is taken out ,device will shutdown why its happening and which part of android source supposed to handle this behavior?
View 4 Replies View Related