After i bricked my phone on my first attempt to flash a ROM I waited a couple weeks. Today I successfully flashed ZapX and it seems to work. My question is: How long does it take for all of the apps to reinstall from the market? Is there a faster way?
Also: I dont remember if this rom is deodoxed or not. If not, is it safe to put 928 Blackglass on the phone with this ROM?
View 4 Replies
If I have apps on my sd card will the settings and data be there when I reinstall it after installing a rom or flashing an sbf? E.G. I have Angry Birds on my sd, will all the levels and stars stay the same once I reinstall it after I install ApeX ROM?
I have a Titanium Backup, do I need to backup before I install the ROM or is the data already on the sd card?
I'm trying to install the leaked official 2.2 froyo update (I897UCJI6-OCD-REV02-Low.exe) that I picked up from Cognition over on XDA but when I run the Odin one click downloader it hangs at <ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
I removed the battery and restarted and flashed the factory ATT ROM and that worked fine. Why this is just hanging up on install. Seems everyone else who's downloaded it had no trouble. I've tried the file direct from design gears and also the mirror on multiupload.
I am trying to go from 2.1 back to 2.0.1 to root but When I go into bootloader mode, the screen doesn't change from "bootloader 2.2C" to anything. And the flashing always fails at 100% and nothing is changed when I restart my phone.
View 11 Replies View RelatedI root all my phones for various reasons, and have flashed ROM's before on the original Droid. On that device there were clear reasons to flash ROM's and since the community was ginormous, there was lots of information about the stability of various ROM's. So I'm new to the DroidX and wondering if there are any stable ROM's out that might be worth loading up (for fun and for performance boosts - not necessarily speed). I use my phone as a primary phone for work and home, so it has to be stable.
View 7 Replies View RelatedEvery time i go into nandroid and choose the folder i click every single restore boot and everything and all it says is md5 mismatch..
View 20 Replies View RelatedI've had my Droid for a while and finally decided to take the plunge and root it a few days ago. I had initially updated with a Simply Stunning 2.1 ROM, and it went well and was beautiful. I was tempted by the siren's call of Froyo, however, and decided to flash Bugless Beast 0.1 onto my Droid via ROM Manager. I've seen in multiple threads that this is supposed to have Flash and WiFi Tethering native, built into the ROM. Mine, however, did not seem to install these features.
Are there multiple "BB 0.1" releases, and could ROM Manager have grabbed one that did not have these features? I've already grabbed a program to do the WiFi tethering, but Flash is one of the things I had heard worked with this release. Should I reflash the phone? I'm hoping to avoid that as I ended up using Metamorph to apply a really nice theme for it, but I didn't think to check for Flash until I was on a site that uses it and it didn't work.
Got my ROM flashed for the first time courtesy of DroidReview on YouTube and more than a few of you on here. But in the vid there was never a mention of wiping the cache and/or partition while in nandroid. I seem to recall that somewhere else on here. Can someone tell me if you're supposed to wipe the cache/partition from nandroid before flashing a new ROM? If so, why (or why not)?
View 8 Replies View RelatedI rooted and became, as many of the rest of you have, addicted to flashing new ROMS. I get the feeling that this addiction will need to be fed more and more as leaks of 2.2 start poking out since it is now rumored to be coming. However, this causes an issue for me. My company was very reluctant to let me move away from the blackberry and to the Droid and have recently decided that I have to use the Goodlink Enterprise app for email. If/when I do a data/cache wipe because I've changed ROMS I cannot re-activate the email without my IT department generating a new PIN for me.
View 10 Replies View RelatedI am currently running what is in my signature. I did do a rom backup before I flashed the one in my signature. I want to switch to another custom rom. Can I just flash a new rom over the rom I am currently running or do I need to go back to my stock rooted group that I originally backed up?
View 1 Replies View RelatedFrom reading various posts, I feel like I'm one of the few that's not. I'm still flashing ROMs manually with SPRecovery update.zips and nandroid backups but I'm seriously thinking about using Koush's ROM manager. What are the advantages/disadvantages? Is it stable?
View 49 Replies View RelatedWant to try the new smoked glass and other ROMs, but I left my trusty Toshiba at home when I left last week. I'm sure I can use astro to put the file on my sd, just not sure if this is a good idea.
View 15 Replies View RelatedSo I just flashed the SBF back onto my phone with RSD lite and now when it makes the call to activate my phone it asks me to put in my 10 digit number and says please wait while we transfer your call.
View 10 Replies View RelatedI am not planning on doing this, but this just popped into my head. If you have installed a custom kernal while rooted, and you want to flash back to 2.2, do you need to install the stock kernal.
View 5 Replies View RelatedI was wondering if you installed themes the same way you flash a new ROM. I flashed bb 05 to my droid, and found the smoked glass with blue theme and wanted to use that. Is that just a fancy version of BB? So really I would just be flashing that on instead of the original?
View 16 Replies View RelatedWould you say it's a huge hassle to get back all of your apps after flashing? Im just curious to see what methods people use to shortcut their way back to the way they like their phones most. I would assume tibku would be your best friend here. But are there people out there who get a kick out of un/reinstalling all the time? I just wanna know how people do their thing with the SBF.
View 21 Replies View RelatedSo I've been reading around trying to figure out the whole ESE53 thing before I try it. The post on alldroid linked in the sticky says that it will wipe my phone and unroot it. A couple of questions arise from that. What exactly is wiped? And is the re-rooting process the same? Can I use DMupdater to root it again?
View 3 Replies View RelatedDo most people always backup the ROM, w/ ROM manager before installing new kernels?
Also is there a way to set the number of backups you keep w/ ROM manager?
I performed a backup prior to flashing back to the SS 4.5 and have used the ROM before however I have no idea why my contacts aren't coming back up at all. My SD card is in the droid, and I know the contacts file is there just fine, but is almost as if it just isn't being seen, so none of my fb contact info will sync naturally because it doesn't see any contact info to sync to. Any ideas on how to get the contacts back up? The only other change I made was I changed to a 1.1 GHz LV kernal since the 1.0 was giving me problems...
View 9 Replies View RelatedI changed my build.prop file after updating to 2.2 for the market fix. I wouldn't have to change it back prior to flashing SPF right?
View 3 Replies View RelatedI have had no issues before, but now when I flashed the rubix focused 1.0 (from rubix 0.3) i have lost all but 20 camera pictures and all but 1 downloads. Even more odd is that when I restore to my backup the pictures show up but then they start to disappear. I connected my phone to my laptop and only the 20 pictures show up in the camera file, however, ALL of my pictures (camera, download, wallpapers, etc) show up in the thumbnail folder but the quality is not very good (obviously). does anyone have any idea how this happened and what I can do to get my pictures and videos back?
View 2 Replies View RelatedI am trying to use RSD Lite to SBF to 2.2 OTA but it keeps on giving me the dreaded Failed flashing process. Failed flashing process. (0x7100); phone connected. I am running Windows 7 x64 and have the latest Moto drivers installed (4.7.1) and am running RSD Lite 4.8. I put my phone in bootloader mode and connected my USB. It is showing iup in port 1, but I am also getting a lot of N/A values. Is this normal?
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x003001
DRM Version: N / A
I choose the SBF file and click start and it immediately gives me that error message. Very frustrating.
I just put Froyo 2.2 on my Moto Droid using this ROM: http://androidforums.com/roms-droid/127966-rom-stable-android-2-2-frg01-clean-untouched-virgin.html
And I used the 800mHz kernal found here:
How To: Get Android 2.2 (Froyo) On Your Motorola Droid Right Now! | TheUnlockr
I am experiancing a few freezing problems and bad start ups, but I am assuming these kind of surprises come with flashing different ROMs/kernals onto your phone. I noticed, however, that occasionally my screen will get really "twitchy" e.g. when I press a key on the android on screen keyboard it types the letter 4 times. or when i drag the notifications bar down half way and keep my finger still i can see the bar twitch up and down rapidly. I have heard from several review sites that twitchiness and stuttering usually have to do with the processing, which made me think of the kernal change. Does this mean i picked a bad kernal or a bad speed? If i get this twitching does it mean get a faster kernal or a slower kernal?
I am running FRG22 rom from peteralfonso and want to try out his BB 0.4, is crucial to wipe before flashing. What would happen if I don't?
View 1 Replies View RelatedI attempted to flash Pete's newest Froyo build. Did a wipe of data/cache, but my phone said the file was bad. Now for some reason I don't have 3G service. I've flashed every nandroid backup I had saved but I can't get it back. Any idea how I might be able to fix this?
View 9 Replies View RelatedI rooted my android device with froyo yesterday. I installed the rom manager and its associated programs. Then I downloaded and installed the Cyanogen 6.0 mod. I was able to install the mod yesterday but I did not wipe my data clean which made the startup screen loop. I restored my phone, and now I can not reinstall the Cyanogen 6.0 mod. I go into the rom manager and select download, I select to wipe my data and to backup the system, then I restart in the Clock Work Recovery Mod. Once there I can not find the Cyanogen 6.0 to flash. I have been trying to get this to work for the past 24 hours!
View 2 Replies View RelatedJust want to know if I would be able to flash custom ROMs on my Droid? It's fully flashed to cricket, running FW 2.0 with SPRecovery. I have a full backup on the phone right now, but I'm wondering if I'm able to flash custom roms on this phone without messing up the proxy workaround settings.
View 5 Replies View RelatedI'm un-rooting my phone using OMJ's guide in the everything root related guide, and I'm getting a "Failed Flashing Process" error in RSD Lite.
I am running as admin, I have the correct drivers (I recently rooted...), I have the sbf in C: .... yet it fails.
The error says " Failed Flashing Process. Failed Flashing Process. Interface BP: Error flashing subscriber unit. Device API Error: 0xE0030009 Command: ADDR (0xE0231009); phone connected"
I am going to try flashing SPRecovery to see if I can at least get to a working point.
SPRecovery worked. It boots into 2.1 and has SPRecovery as the recovery. I still want to get it to stock, so I am going to try and download the stock sbf again (it doesn't have a checksum so I have no way of knowing if it is good or not...) .... here goes nothing!
Do I have to install market apps 1 by 1 every time I flash a ROM? I rooted to Sapphire 0.7.0 a couple of days ago and had to install market apps 1 by 1. Is there a way t back just those apps up and somehow restore them after flashing a ROM?
View 6 Replies View RelatedMy phone spent the better part of the day on charge at work. When I got into the car, it was flashing red at me and telling me to plug it into power now. After a 30 minute car ride, it was showing mostly green. This happened once before but I figured if I ignored it, it would go away.
View 3 Replies View Related