I heard there's a pre-rooted 2.1 image out there. Where can I find that? And I have SPRecovery installed, will installing the 2.1 image require me to reinstall SPRecovery?
Also, can SPRecovery then restore to and from 2.1 and 2.0.1?
View 4 Replies
So the other day I rooted my phone and it just keeps restarting on me. Cant get into recovery mode or anything. Now I gotta send this phone back to Verizon and I don't want to send it back with it being rooted cause I don't want to get charged for the phone. Now my question is how can I mess up my phone so Verizon don't know that I rooted my phone. This may sound dumb but I kinda need a way to fry it or something like that.
View 2 Replies View Relatedthis WILL wipe your phone. Make a backup prior to doing this and of course im not responsible, blah blah blah Don't be an idiot either, you must be on Froyo 2.2 to restore an image of 2.2. So, to the question (Can I use this to update my 2.1 and have root). I've noticed that most people that CAN'T run it (MD5 error) are people that did a factory reset. What i would suggest to anyone else reading this, is if you know you have factory reset on 2.2, this probably will not work (by all means try). BUT if you WANT to run it that bad, do a data wipe, and THEN sbf. Root 2.1, update to 2.2, install koush's bootstrapper and try again. that will probably work. Credits to krayzee1 on alldroid for posting this. Mike919 we now have a clockwork recovery backup that you can recover to your phone. What does this give me? well it gives you a way to restore your phone to its default state but it has already been rooted and deodexed.If you dont know what root or deodexed are then please search around the forums.
View 49 Replies View RelatedI was rooted and decided to unroot for giggles. After i did I went to root again and now I am getting this: "E: cant open/cache/recovery,command " When I reboot into recovery mode.
View 4 Replies View RelatedI took unrooted my phone today because I was going to excange it for a new one because of a loose headphone jack but it turns out it was my headphones. I used SMupdater and it went fine. now when I try ot root again I get a "can't open cache/recovery/command" error in recovery and it wont let me select any of the options by hitting the camera button. idk what to do
View 2 Replies View RelatedI hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.
View 38 Replies View RelatedFirst off let me say that I was wrong about this issue. Its not an issue with Easy root it is just something built into android. So I apologize to anyone I argued this subject with but specifically Patch. Its also not an issue with rom manager. This applys to users that after flashing a custom recovery they can boot into it once but the next time you try to boot into recovery it has reverted to stock.
This mostly happens to users of easy root or users that use my guide for rooting using Linux
So for the fix.
Download this file and place it in the root of your sd card.
http://dl.dropbox.com/u/7223192/install-recovery.sh
Download Terminal Emulator from the market. The one by the dev Jack Palevich.
Open it and type the following commands.
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system
dd if=/sdcard/install-recovery.sh of=/system/etc/install-recovery.sh
chmod 550 /system/etc/install-recovery.sh
sync
after that just flash the custom recovery of your choice and you should be good to go.
I tested this on my phone and another user tested it for me and it worked for both of us. If anyone has an issue let me know. This issue is so sporadic that its hard to have people test the fix.
I would like to know how many people are useing froyo non-rooted and rooted.I'm tyring to diside on what should i do?I also looking for advice on if i install Froyo Rooted, what can i do with it? and install on it?
View 6 Replies View RelatedCurrently I have an Eris with v3 Leak meaning I can't root. But my wife loves my phone so I plan on giving her mine and either getting another eris and rooting or a Moto Droid and rooting. I've been trying to read up on the Droid and the different ROMS available and have some questions.First I want to make a few things clear:
1. This IS NOT a phone comparison.
2. The Incredilble IS NOT an option since it can't be rooted and I don't want to spend $200 on it.
3. I'm looking for WELL INFORMED OPINIONS, if you don't have one keep moving there is nothing to see here.
To be fair I've obviously done a lot more reading on the Eris which is why I'm looking for well informed opinions from Droid owners that way I can make a well informed decision.
Just rooted yesterday, and everything was running great... untill I installed Simply Stunning v4.3. I went to make a back up and found that I cannot access my recovery, it was stuck at the M. Now Rom Manager says that if this happens, flash a different recovery then flash clockwork back. Here is the catch- When I try to flash a different recovery I get this, "An error occurred while flashing your recovery."
View 9 Replies View RelatedI recently got a new droid incredible (my first phone besides the crapy razer) and my friends told me to root it. I used the guides on these fourms, rooted it, and apparently it worked (I have superuser and can download root only apps). The only problem is that everywere, it says recover once you root. Every time I've tried this, it just leads to a black screen with two white lights on each side. I've tried everything to fix it; I've looked at multiple threads and youtube vids, I even found an app that should sent it into Clockwork recovery mod, but even then it still had the problem. Does anyone know how to fix this, or should I just try un-rooting it (maby I did something wrong and it dosent say) and re-rooting it again?
View 31 Replies View RelatedI have a rooted incredible with the hydra kernel. i had the 1.13 and went to the 1.15 over clock kernel and my pone went into a reboot cycle and wouldnt start up. i was told to go to the format boot in the clockwork recovery so i did. now the phone will only start up in the bootloader screen it does the sd card check. any ideas? they are sending me a new phone but i really dont want to re set up the phone.
View 17 Replies View RelatedWell, it's being reported, however not confirmed that the Droid Incredible has finally been rooted.He's also reporting that he's OCed to 1.5GHz.What's more he's working on 2GHz.Good Lord, could you imagine?I've been saying that as of right now, based on personal preference, that a rooted Droid is the best option.But this will def start to sway opinions, including mine.
View 32 Replies View RelatedI'm rooted the 2GB pny way and have the unrevoked recovery system on my phone.When verizon decides to let the ota/froyo/maintrelease (or whatever it's being called) as reported on bgr and here, what exactly do I need to do to get this as I should over the OTA?I am assuming I need to unroot (but why?) and restore the Recovery System, as well as remove any root programs from the phone.
View 2 Replies View Relatedcan you flash this before you actually root your phone so you dont get bricked?and what are the ways to get a REAL brick? because i've tried looking and everyone has gotten either a usb brick or something else where they can just reflash or something.
View 2 Replies View RelatedI've used this guide for rooting and rooted him smooth BUT,when I do this step: 5. Run "Terminal Emulator". Type (press and hold menu to get the keyboard up) in the following: su (press enter and wait for the "Super User Request Prompt". Choose "Allow" and make sure its ticked to Allow every time.) flash_image recovery /sdcard/recovery.img it replies: flash_image: not found.... (and i did typing OK,I tried with renamed and un-renamed file). OK,then I tried with Flash rec from this tutorial BUT.... Flash custom recovery is missing. There is only: download recovery image button,but blanked. I just don't get it,img file is in /sd/recovery.img or longer version: /sd/recovery-RA-hero-v1.5.2.
View 10 Replies View RelatedI have been lucky enough to been given a Huawei P1 and a P1 XL.
I have managed to root it successfully which is great but the rom on both does not come with Google Apps Suite.
I know it's possible to flash the gapps once rooted and you have a recovery on Huawei's as I have done this on my honour.
The Chinese recovery available for P1 doesn't work on my P1 or XL.
Is there any way to flash the gapps packaged without a recovery or to do it manually?
Hi there, I have recently got around to rooting my HTC Hero. I have rooted it via the Andoot software and flashed a recovery ROM via the Terminal Emulator. Upon rebooting the phone, I get into the Recovery Menu without any problems. However, if I then boot the phone back up, shutdown again, and then try to get into the Recovery Menu, I have faced with the red triangle with the explanation mark. Any ideas why? Basically, it seems I can only access the Recovery Menu on the first reboot.
View 1 Replies View RelatedI was messing around with root explorer and noticed that i was able to delete my boot animation with it when i was mounted as R/W so i thought i would try to copy one and it also works... so no need to push with adb shell.. here are the steps
1. take the boot animation make sure it is named bootanimation.zip and copy it to your SD card
2. then open root explore and mount R/W and then navigate to the file and press on file till the menu comes up and select copy
3. then navigate to data/local and paste the file in the local directory
and you are done, this can be done with the android_audio.mp3 file as well just paste it to the same place.
just thought this would make it easier for people instead of using adb shell
root explorer:
http://www.appbrain.com/app/com.speedsoftware.explorer
So I have a ROOTED Eris (checked positively using terminal emulator) running a 2.1v3 ROM. What I'd like to do is eventually get to the 2.1 OTA ROM. Earlier I downloaded ROM Manager which, after some searching gave me some problems other people have been having. I can't flash to the ClockworkMod recovery image as it gives me a "Error occurred while attempting to run privileged commands!" message. I tried reinstalling, fixing permissions etc. all with the same results.So now i'm trying to flash Amon's recovery image instead using Terminal Emulator and the command line: only to yield the message that the file could not be found or something. I'm on a mac and I saw another way on here that involves running commands from your computer to your phone using the skd. I started to do that only to run into a "permission denied" when attempting the first "adb" command line. Am I missing something? I'm trying to read and re-read as closely as I can. I'm not entirely comfortable with this whole process but I'm trying to take the time to really understand it and i'm still having difficulties.
View 6 Replies View Relatedhow to install clockwork mod recovery in my (rooted) spice mi 320 to install a custom rom ? i tried rom manager but my device is not listed.
android version - 2.3.4
kernal version - 2.6.35.7
baseband version is MAUI.11AMD.W11.19.sp.v1.P5
I got fed up of waiting and decided to root. I decided to go with 3rd wave 2.2 and everything went smooth. Now my question is if I want to try other Roms do I need to do anything special or just download to the SD card and repeat the same drill. Or do I need to do a recovery and or uninstall wave prior to installing a new rom?
View 9 Replies View RelatedI've been reading this forum for awhile but can't find a solution to my problem...
1. I rooted my 2 HTC Desires 2 months ago, what went fine. Have been able to install apps that request root. And on 1 Desire I have put the Nexus1 Froyo OS.
2. Now when receive a OTA: error
3. I tried the manual update: error
Both phones came from HTC directly, any Sim Card is useable on them.
I first get the error "E:Can't open /cache/recovery/command", then I get:
"Verifying update package
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted."
When installing certain custom ROMs on rooted Android smartphones or tablets, you will encounter Status 7″ error issues once in awhile with ClockworkMod (CWM) Recovery.Status 7 error is caused while the ROM's updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing, called asserts.
Asserts is a safety mechanism so you don't accidentally install another phone model ROM on your phone. E.g. You tried to install Galaxy S2 ROM on a Galaxy S3 and ending up hard-bricking your phone but you got Status 7 error which saved you.this safety mechanism is great but there are times where even if you have the correct ROM for your phone, you will get Status 7 error.
This is due to an error by the developer of the ROM in the updater script, causing havoc, making people install another custom recovery like TWRP recovery for no reason. You can fix the issue by installing TWRP recovery but if you need to restore your CWM backups later down the line, you will have to re-install CWM recovery, causing a big hassle.
Also, if you update to the latest CWM Recovery using ROM Manager, usually this problem is fixed.But what if you did update to the latest CWM Recovery and still happens? And yes, it does happen even when you update your CWM recovery.
If you simply don't want to change your recovery (because if it ain't broke, don't fix it) or you still get Status 7 error after changing recovery, you can simply edit the updater script yourself to get rid of the asserts.All you need is a computer and a zipping program! (You might be able to even do it on your Android device with AndroZip and text editor but I haven't tried yet.) MAKE SURE THE ROM YOU ARE INSTALLING IS COMPATIBLE WITH YOUR ANDROID DEVICE AS INSTALLING WRONG ROM CAN BRICK YOUR DEVICE!
Make sure if you are installing a ROM on AT&T Galaxy S3, the ROM zip file you downloaded is for AT&T Galaxy S3 not for Verizon Galaxy S3.
Step 1. Copy the ROM zip file to your computer and extract it using your favorite unzipping software.
Step 2. Once unzipped, browse to the META-INF/com/Google/android directory. You will find two files called update-binary and updater-script.
Step 3. Rename updater-script to updater-script.txt and open with your favorite text file editor.
Step 4. Get rid of the line starting with assert to next semi-colon. Usually this is the first line or one of the first lines at the top of the text file. Just delete them.
Step 5. Save file.
Step 6. Rename updater-script.txt back to updater-script.
Step 7. Rezip all the files yo've unzipped.
Step 8. Copy the new, edited zip file to your phone.
Step 9. Try re-installing ROM, now it should install fine without Status 7 error.
Can the blackberry Playbook be rooted and a Android with recovery be installed? .
View 9 Replies View RelatedI rooted it last week with the unrevoked 3 method which seemed to go ok then i tried some different roms and some worked some didnt. I tried to install the r8-bravo-desire-modacocustomrom-withadditions-a2sd+-signed...! This rom got stuck on the white start up screen. I thought that if i cleared the sd card it would install but still the same thing then i just got the white htc screen which i cant get off and i cant load the recovery to change anything...! The sd card is working and i can get into the hboot and when it reads the sd card says wrong img! Is there something missing on the sd card? Have i bricked my phone? Any ideas on a fix?
View 31 Replies View Relatedselling it, need it to go back to stock rom before i sell it, do i simply add the recovery-ra-heroc file to my sd and flash like a rom? do i wipe first? how do i wipe? trying to sell now need to do this quick.
View 3 Replies View RelatedI have not really found any threads in these forums deticated just to overclocking the Droid. I am running BB v.9 and would like to overclock past 600 mhz. I have 2 overclocking utilities. (Setcpu, and overclock widget) I understand that I have to update or flash the Kernel. I tried doing this OverClocking Motorola Droid To 1.3 GHz In 7 Easy Steps | areacellphone.com
The adb commands were successfull. WHen I rebooted my droid it was bricked (well not really cause I did a Nandroid backup right before I did this) It was just frozen with the white Motorola logo. Perhaps I downloaded a bad 800 mhz evilboot8.img.
I just ran a anti virus program and it says I am rooted. I do not want to be rooted. I did click on the shole updater but I never opened it up because I am a chickenshit and know my limitations. I thought the scan found the download and assumed I was rooted so I deleted the download ( I never opened or saw any type of process). AV still says I am rooted. How can I look to see if I am or not rooted?
View 14 Replies View Relatedim trying to install flash. Im running jrummy 1.0 with a 1mhz p3 kernal, I am using rom manager and when it tries to reboot into recovery it just hangs at the M screen. i have to pull the battery then i try to reboot into sprecovery using x and power button but i get the same thing. I flash sprecovery through rom manager but i cant go into it again then back to clockwork and same thing.
View 3 Replies View Related