KitKat 4.4 :: LG G2 Enters Logo Boot Loop After Flashing Cyanogenmod 11 With TWRP 2.7.0.0
May 11, 2014
I am using a rooted verizon LG G2. I rooted the device with ioroot 25 and installed TWRP 2.7.0.0 using AutoRec. (AutoRec - KitKat Recovery Installer - xda-developers, Here's a forum if you're unfamiliar with AutoRec)
Whenever I try to flash Cyanogenmod 11, TWRP says the flash is successful. I then go to reboot the device and I'm stuck in a boot loop of LG's logo. During the flash, TWRP mentioned that no MD5 file was found, which may or may not be related to the issue I'm having. During the bootloop, I booted back into recovery using the keys on the back of the phone and restored Stock LG KitKat. I've tried using multiple versions of CM 11, nightlies and snapshots. I'm stuck using TWRP 2.7.0.0 because AutoRec is one of the only methods I've had success with when installing a custom recovery.
View 2 Replies
Feb 25, 2014
I spoofed my device S6312 to galaxy nexus using network spoofer to download an incompatible game from google play store.According to network spoofer everything worked great but nothing actually happened and that game was still incompatible on play store.So I launched network spoofer and told it to recover my device again to S6102.It said that the device will reboot so I gave it permissions and my device started rebooting but it stop at the Samsung logo and was doing the same thing again and again so s actually boot looping. How to recover my device and any way to do it without a computer.
View 1 Replies
View Related
Aug 30, 2013
I installed Cyanogenmod 10.2 a few days ago, and has been working fine up until about an hour ago. My phone basically locked up while I was using Spotify, so I did a hard reboot, and got stuck in a boot loop. I tried to reboot a few times with the same results. I didnt have much on my phone, so I did the factory reset (using Teamwin recovery), but after that the phone was still stuck in the boot loop. After that, I tried the "Format Data" option.
After going through, It was still stuck in the boot loop. I've also tried to restore backups, but to no avail. I'm not super knowledgeable about the whole inner workings of rooting. I didn't want to do the advance wipe (includes internal storage, system, USB-OTG) for fear of really messing something up. If it completely restores to factory settings, i don't really care, I just dont want my phone to be completely unuseable.
AT&T Samsung Galaxy S3
View 4 Replies
View Related
Feb 17, 2014
I should have just left it as it was out of the box..So after attempting to install a custom rom (4.4.2 Play edition)my s4 is stuck at the Samsung I9505 boot screen. I wiped the 'Dalvik cache' 'System' and 'cache' partitions in TWRP as I was following along with a Youtube video (that didn't work). When I tried to flash the custom ROM it automatically said failed. After giving up and turning on the phone I found that I'm stuck at this screen.
Have I bricked the phone? $550 could have gone down the drain just like that. I don't want to touch it without any advice and make everything worse. My only hope now is that I've managed to wipe the original software and it has nothing to boot from.
Why did the ROM install fail in the first place? I had it copied on the SD card. It was zip file.I can still access TWRP just fine and my SD shows up with the custom ROM still there, it's just whenever I hit install it fails in under a second.
View 2 Replies
View Related
Sep 19, 2010
Every time I flash a different Kernel my Evo goes into a boot loop. I am using RA-Recovery, and wiping Data/cahe and dalvik before flashing. I flashed a new ROM and was able to install Kernel one time, any more than that and the Boot loop starts, even if i flash the first kernel that did work it still loops on me. I was on Clockwork and changed over to RA, that did not help, tried both BFS and CFS and no change. Tried Kingx 8 and 9, netarchys 4.18 and 4.19. I flashed 3.28.651.1 then netarchy's 4.1.9 and it started the BL, then reflashed 3.28 and tried kingx 9 and it worked, I'm beginning to wonder if there is something with netarchy's kernels that my Evo doesnt care for? I should add that this time when wiping i only wiped cache and dalvik and left the data alone. I suppose the only real way to find the culprit is to test out all the variables.
View 7 Replies
View Related
Jan 6, 2014
My device details: SGS3 T999, rooted, running Jellybean 4.3 on a liquid smooth ROM. Its a year old and has been a solid performer up until now.
My device is stuck in a cycle where it gives a quick vibrate, then SGS3 splash screen with white letters, then black screen, then tiny blue "Recovery booting..." words in upper left of screen, then black screen with couple vibrations, and around and around it goes in the same repeating cycle.
Just before it started I had taken the following actions: Dumped the following 2 files onto my EXTSD card (cm-11-20131217-NIGHTLY-d2tmo.zip, gapps-kk-20131119.zip) from my PC, booted phone into recovery mode using TWRP, did a factory reset wipe (success), cache wipe (success), dalvik cache wipe (success), flashed the NIGHTLY file (failed), flashed the gapps file (failed). At this point I should have sought some support. Fool! I next did a reboot step still in recovery mode. Without the reboot happening a message came up stating Superuser permission had been broken (the best I can remember) and the option to have TWRP repair the permission. I opted "yes" to repair. Then the loop started that I can't escape.
I have pulled the battery multiple times, tried a regular boot up, tried a recovery boot up (up volume+power+home) dropping the home button after a few seconds. Nothing is working. Prior to the above steps I backed up everything on the device. So I have backups to use if it can be done. My best guess is that I failed to update my CyanogenMod or TWRP to the very latest versions and it caused this hang up.
View 1 Replies
View Related
Jan 12, 2014
Well I'm trying to fix my friends phone the LG Optimous G pro and iv tried installing stock firmware but either I don't know how or the guides were out dated. Why I am having no luck installing Stock.
View 2 Replies
View Related
Jun 13, 2012
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies
View Related
Jan 21, 2014
It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen.
View 2 Replies
View Related
Nov 4, 2013
I got tired of the kindle fire OS, and really loved my nexus 7, so I decided to flash it to twrp and cyanogen. So following the directions on the youtube video, (can't link it) which was an awesome tutoral, I flashed it. Now the issue I'm having is that Cyanogen will start to boot, get to a screen that says 'problems loading widget', then reboot, and doesn't stop.
View 3 Replies
View Related
Nov 20, 2013
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable.
View 2 Replies
View Related
Sep 16, 2010
I tried installing Tranquility and must have screwed something up because now my phone won't boot past the Motorola Logo. It's been sitting here like this for about 15min and I can't even boot into recovery by holding the power and home buttons. I don't know what else to do now. Idk if my phone is bricked but even if it is don't I need the SBF file to unbrick it and I can't find that file any where. I did a nand backup or whatever before doing any of this so hopefully that can help me. What should I do now?
View 9 Replies
View Related
Feb 19, 2013
I have recently rooted my Galaxy S3 and I wanted to install cyanogenmod. I used ROM manager to do so.
The problem is that as soon as I installed it, my phone supposedly rebooted but it never started up again!
Now all I get is a flashing "menu" and "back". I can't boot normally, or in download mode, or in odin mode.
View 9 Replies
View Related
Mar 12, 2012
I recently installed cyanomod on my wildfire (buzz), but when my phone is on AC i can not turn the phone on. this can only be fixed by removing the battery and booting it without being connected to the net. Also,if i plug in the AC when the phone is turned off, the red led indicating the battery charging will won't turn off when i unplug the device.
View 1 Replies
View Related
Jun 14, 2010
So, I'm attempting to create a custom bootscreen for my EVO, and was trying to find out if anyone knew how to get a copy of the initial "htc EVO" logo with white background that comes up?I've gone through the file system a few times, but haven't managed to find anything in there.Is it hard coded into the phone itself somewhere magically?
View 2 Replies
View Related
Apr 21, 2010
What's up everyone, I created a custom cyanogenmod themed boot animation the other day and thought I would share it with you.
Cyanogen Boot Animation
Screenshots and installation instructions are at the above url.
View 8 Replies
View Related
Jan 31, 2013
I was trying to install CyanogenMod, but now it wont boot. It's just boot with a 'circle'logo, and nothing happends.
Please see my video on youtube: [URL]...
Is there anyway I can get back to get my phone back to working again? I have tried to hold down VOLUME UP and Powerbutton with USB-cable in, but still the circle-logo
View 1 Replies
View Related
Jun 27, 2010
Last night i d/l the DC 3.2 copied it to SD card, and used ROM manager to load it. The EVO went into a boot loop afterward. I am trying to recover and haven't had any luck. I pressed the power and down button selected clear storage and didn't help.If i chose recovery it just drops back into loop.Can anyone help me.
View 8 Replies
View Related
Jan 9, 2013
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
View 1 Replies
View Related
Aug 6, 2010
so i installed via rom manager. and i let it run its course ... then its nothing but the boot animation for 30 minutes until the battery died lol.
any ideas/suggestions?
View 1 Replies
View Related
Jul 31, 2010
I was a Power Palm User for 10 years, have a blackberry for work, and finally gave up my Palm for a HTC Evo 4g. Thus far, I have extremely mixed feelings. So here is a description of my current issue. My battery died a few nights ago, and I got stuck in a do loop where the device keeps rebooting but never gets to the navigation screen. The screens I see are:
* HTC Evo intro screen
* Sprint
* 4g with welcome tone
Followed by repeat of Sprint then 4g again and again............
View 1 Replies
View Related
Mar 24, 2012
I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I boot-up the kernel through the recovery mode on the phone butit failed to load so i just rebooted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc but the problem is i dintmake any kind of back up or recovery i think.
View 2 Replies
View Related
Apr 25, 2013
how to fix a boot loop in rom .I am portind arom for lg p690 and it is boot loop..And can i find the reason of boot loop??
View 3 Replies
View Related
Nov 10, 2010
Ever want to change the ugly Motorola boot logo on your Droid X or Droid 2? Now you can with DX/D2 Logo Changer on the market.For a gallery of all the images you can choose from see here.Special thanks to Team Black Hat who originally started work on changing the boot logo and the many people on these forums who created the images.If you created an image used in the app let me know and I will put your name in the about/help section.
View 5 Replies
View Related
Sep 24, 2010
Seems nobody has ever done the "android" boot logo as a live wallpaper, the logo that sits there on a black screen after you turn on the phone on some devices and it flashes a reflection once in a while. Or at least I haven't looked hard enough, does it exist?
View 2 Replies
View Related
Sep 12, 2013
I have an android tablet the is stuck at the boot logo. I've successfully gotten into recovery. But it had no menu...[URL]
USB debugging is not on. I have no clues as to the model of the tablet, as it isn't said anywhere on the device.. [URL]
View 1 Replies
View Related
Aug 29, 2013
How to change the kernel boot logo on my samsung kernel? I don't mean the boot animation. I may have built a ROM but the kernel used there doesn't belong to me.
View 9 Replies
View Related
Jul 11, 2012
My Sharp FX (ADS1) is stuck at the "Sharp" logo when I try turning it on, now I know that are several of these post on this forum, but I still can't find any that offers a solution for me. The phone is rooted and that's it, I haven't had time to put a new ROM or anything yet (although I would love to) and I can't seem to get into any type of recovery mode, and I think I have tried all of the button combinations, the only time that I can get it to show something other than "sharp" is when I plug it in, it shows a charging battery.
how to get into recovery mode (sym + power)
View 2 Replies
View Related
Sep 5, 2012
How can I remove the boot logo coming after the LG logo from my LG gt540. I have cyanogen mod 7 by miroslav. The swift Droid second life logo I want to remove.
View 3 Replies
View Related
Nov 20, 2013
I was getting to the installation of the rom that Gava97 and Maclaw are developing for the Xperia U (I installed for testing), now it wont let me downgrade to any ROM getting error 7 and 6 when flashing others, looked up the respective fixes for each error and still nothing.
View 1 Replies
View Related
