General :: Unable To Flash CyanogenMod After Flashing Stock Android 4.4 On Nexus 4
Nov 20, 2013
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable.
View 2 Replies
Feb 12, 2014
how would I go about flashing a stock rom to a bricked nexus 4? ( wont boot or boot into recovery)
View 6 Replies
View Related
Sep 1, 2013
i'm using lg l3 e400 ! actually my went in boot loop ,so it ws unable to start then i flashed kdz V10L(as i'm from india ). then my phone sarted normally!but the main problem is that now i tired to root my phone so many times but always and error comes link failed permission denied !!so i think that after flashing orginal kdz flash (stock rom )kdz V10L we are unable to root !!
View 5 Replies
View Related
Apr 4, 2012
can i flash it via cwm?
View 1 Replies
View Related
Oct 27, 2013
I just bought a Samsung Nexus $G LTE phone for Verizon. Previous owner installed a custom cyanogenmod kernel. I don't care for this kernel or setup, how do I install the stock factory Verizon image? Is there an easy way to do it without bricking the phone?
View 7 Replies
View Related
Jul 13, 2010
So now that we have the wireless hotspot option I'm done with root. Especially considering I haven't been able to get weather updates for the past two weeks and my phone restarts when trying to install new apps.
I'm ready to just set everything back to stock and go back to getting OTAs. I know I can't relock the phone.
My problem is, I have the stock recovery image however whenever I flash it and try to go into recovery it shows me this screen with a little android guy and a big triangle with an exclamation point inside. And then it sits there until I do a battery pull.
I've tried this with the stock recovery from a couple different sources MD5 checks are all good.
View 3 Replies
View Related
Oct 14, 2012
When i flash it display report me this:
Code:
assert failed: getprop("ro.product.device") == "tf300t" || getprop("ro.build.device") == tf300t"
E: error in /sdcard/cm-10-20121012-NIGHTLY-tf300t.zip
(status 7)
Installation aborted
WTF????
View 2 Replies
View Related
Jun 8, 2013
I just did a flash of Cyanogenmod9 (Domination) and im getting full bars, but I cant do google searches, or access the gps. Clearly im there is something wrong with my connection. When I look at my settings I see full bars, but beside it it says "No internet connection".... very puzzling. The wifi does work perfectly though.
View 2 Replies
View Related
Apr 28, 2014
So I just flashed CyanogenMod 11 on LG G2 and forgotbto flash GApps on my phone and when I try folowwing CyanogenMod steps to booting into recovery mode it won't and it just boots back into the operating system. I think Clockworkmod got deleted when I flashed the operating system. So I can't install it without gapps and I need my apps!
View 4 Replies
View Related
Jul 14, 2012
My main problem with Cyanogenmod is that the default Touchwiz camera app is the best free camera app I have seen, and even more so for the video camera.
I tried taking the Camera .apk file, but I just get a message saying "application not installed" when I try to install it, and "there was a problem parsing the package" if I try to install it from /root.
Yes unknown whatever installs are allowed. And I've tried a hundred and seven different installer/file manager apps, but they all direct me to the same default installer.
Other apps I'd want to take are the calculator and video player.
View 3 Replies
View Related
Apr 30, 2012
Can I use adobe flash plugin on galaxy ace gts5830 without cyanogen mod
View 1 Replies
View Related
Jun 11, 2014
I know the stock messaging app has the option to delete messages over a limit, but the limit itself was set after the fact. So my limit is around 500 but I got some threads over 500 already (from before), any easy way to get rid of them?
Galaxy Nexus 4.4.3 (Cyanogen Mod)
View 8 Replies
View Related
Jun 17, 2013
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
I've tried downloading it many times but failed
View 4 Replies
View Related
Jan 7, 2013
I recently installed Nova and Cyanogenmod 10 on my rooted Nexus 7. I've attached a screenshot to show the problem. All of my app icons have disappeared. I don't want them on the dock of course but on my home screen I cannot get the app icons to come back. For the life of me I can't find anything in either the system or nova settings to get the labels back. I have TouchWiz 5.0 theme installed.
View 3 Replies
View Related
Jan 6, 2013
What's the procedure? My phone ace duos 6802
View 2 Replies
View Related
Mar 20, 2013
I have a galaxy sII (i91000) and i really want the stock calendar apk from the galaxy sIII. I searched xda before but there are like 3 apk's for it. splanner.apk, seccalender.apk and seccalendarprovider.apk but i dont know which is which.
how i manage to do that?
Device: Samsung galaxy i9100 sII
Rom: CyanogenMod 10.1 nightly
Recovery: CWM 6.0.2.9
Apps: ES File explorer, titanium backup and superuser
View 4 Replies
View Related
Jan 13, 2014
I currently have ics and sense 3.6, but I wish to go back to stock ginger bread. A friend recommend that i use Odin...
But what is the easiest and safest way to do it ?
View 2 Replies
View Related
Oct 25, 2013
I had access to a Nexus Q, during the time i was using it, i flashed gapps on the Q's stock rom. My question is if i flashed gapps on the LG L9 (LP769) would gapps install properly? Is there a possibility of bricking my device (which i wouldn't mind because i have a backup)? Although the Nexus Q's bootloader was unlocked, I'm sure that would't have changed the outcome. The only thing that's truly bothering me is since the Q is a Nexus, and since gapps seems to be heavily based of of vanilla android, wouldn't that mean flashing gapps on the L9 more prone to failing? My phone's bootloader is locked but the apps are deodexed.
View 2 Replies
View Related
Aug 20, 2013
Basically by "any browser" I mean all the big name browsers, including Firefox and Dolphin. On my old ROM they worked. Now the same (latest) versions don't. I'm on 4.2.2 (old ROM and new ROM) and I don't seem to have any Flash binaries installed, but I thought it was built into browsers now since Flash for Android is discontinued.
View 2 Replies
View Related
Apr 23, 2014
I have LK bootloader source code which I need to build and flash to a Nexus 5 device.
* I got the source code from the Code Aurora website
* I made a guess which branch is the stable branch I need, because I found no mention of it anywhere (I took "kk_2.7-stable", where kk means kitkat)
* On a Debian 7 stable machine, I installed a GCC cross compiler from Deb packages built using Emdebian tools
* I made a guess which target to compile, because the exact chip name didn't have its own: I use msm8960
* I created some symlinks to the cross-building tools because the makefile and the debian cross-building tool names are different
* I ran 'make msm8960' and the build was successful (I also tried earlier with NDK prebuilt GCC but it failed)
* I got a bunch of files with no idea what to do with them
* I attached the device to the computer and re-flashed the stock bootloader to make sure it works
* I checked the fastboot screen: Bootloader unlocked, secure boot is on
* I tried flashing the 'lk' binary file I got from the build process, but fastboot says:
sending 'bootloader' (1702 KB)...
OKAY [ 0.239s]
writing 'bootloader'...
FAILED (remote: invalid bootloader image
)
The size of the file is much smaller than the size of the stock bootloader, but I don't know if it matters or what exactly I need to flash. I did a lot of web search, including here on XDA, but found no evidence of struggling with flashing the bootloader.
How do I flash the bootloader after I build it?
View 7 Replies
View Related
Mar 15, 2014
flash stock rom on micromax bolt A67. Where i can find flashing tools and driver that supports on windows 8. How could i flash the stock rom.
View 2 Replies
View Related
May 11, 2014
I am using a rooted verizon LG G2. I rooted the device with ioroot 25 and installed TWRP 2.7.0.0 using AutoRec. (AutoRec - KitKat Recovery Installer - xda-developers, Here's a forum if you're unfamiliar with AutoRec)
Whenever I try to flash Cyanogenmod 11, TWRP says the flash is successful. I then go to reboot the device and I'm stuck in a boot loop of LG's logo. During the flash, TWRP mentioned that no MD5 file was found, which may or may not be related to the issue I'm having. During the bootloop, I booted back into recovery using the keys on the back of the phone and restored Stock LG KitKat. I've tried using multiple versions of CM 11, nightlies and snapshots. I'm stuck using TWRP 2.7.0.0 because AutoRec is one of the only methods I've had success with when installing a custom recovery.
View 2 Replies
View Related
Jun 4, 2012
There is no information on how to flash the entire ROM package back to your phone (at least with regard to the errors you may receive).
how to backup one of my phones entire rom package and put it on my other phone that I messed up via the Smart Phone Flash Tool (the exact same model: Star Touch Diamond 2 B2000 MT6573).
The new phone works perfect, I have never touched it, my old phone which is the same model I deleted and formatted the system so I need to put the stock rom on.
I was able to do a "backup" of my new phone, but when i try to flash the preloader and uboot, etc, the sp flash tool says error loading file, or region too large with overlap.
By the way, my phone is not bricked, but I cannot access recovery! I was able to find and install another fully assembled rom to my phone and the phone does power on with lights, but it doesnt have the display driver I need so I cannot see anything.
The reason I flashed another rom was because the phone was essentially bricked and wouldnt do anything, and that was the only rom I could find on the internet that was a full package (preloader, uboot, system, etc) but isnt compatible with phone.
Anyhow, if I understand correctly I need to use hexadecimal calculator to find length of partitions of original phones rom, readback the files, somehow edit the preloader file? then flash them back to the old phone?
View 9 Replies
View Related
May 11, 2014
I tried to install a custom ROM and i failed, so i had to flash a Stock ROM again. After i downloaded the packaged and flashed it using Odin. The touch is not working !
View 1 Replies
View Related
Nov 2, 2012
I need to get my phone is a working state. Can't boot into recovery, I can boot into Odin. How to restore my phone to a working state? It's a GT-i5510M, carrier is Bell.
View 4 Replies
View Related
Jan 21, 2013
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
View 3 Replies
View Related
Dec 20, 2011
i want to flash the kernel on my super stock p500 to fix the touchscreen lag bug cuz it's really bugging me and junk. i'm going to use "flash image gui" to flash the kernel cuz it sounds pretty safe.
remember, i have a super stock, lg p500 (optimus one) running froyo 2.2.
View 1 Replies
View Related
Jan 15, 2013
How can I recover my applications from my tablet after I have rooted it. since the stock/original applications takes up 8 gigs of space of my internal memory. I just cannot seem to access/delete those 8 gigs??
I flashed cyanogen 9 to my SGT2.10.1 and it was successful, although I am stuck on trying to recover my applications from the partition internal memory. Of course I have done a variety of steps to recover them and some of the steps I took are:
1. I tried using the spk tool - I really do not know how to use it and I am having a hard time figuring it out .
2. Trying to delete and reformat the internal memory - was not successful since it only erased of what I currently had on the rooted and partitioned memory, thus my original/stock application are still within the internal memory.
3. I tried using applications such PC36IMG-AmonRA-3.07-gnm.zip - I changed the name to PC36IMG but flashing it lead to installation fail/aborted.
4. I tried recovering them with titanium back up - but the application couldn't see my original/stock applications.
5. Also tried using Astro File manager - Same results as TBU .
6. Deleting the files from my pc via usb- it does not give me an option to reformat it.
View 7 Replies
View Related
Jan 6, 2013
Is there a way to get flash on a nexus 7? I have the smart swf player app from the Google play but I don't think that's the.
View 1 Replies
View Related
Nov 24, 2010
I am attempting my second root, I just did my Eris which made it amazing. I am now working on rooting my girlfriends Evo. This has been a little more challenging. Her radio version is 2.15.00.09.01, every post online has been prior to this version and fails to root. Does anyone have any help for my situation. My main goal is to flash her phone with Cyanogenmod.
View 5 Replies
View Related
