Last night i d/l the DC 3.2 copied it to SD card, and used ROM manager to load it. The EVO went into a boot loop afterward. I am trying to recover and haven't had any luck. I pressed the power and down button selected clear storage and didn't help.If i chose recovery it just drops back into loop.Can anyone help me.
View 8 Replies
I was a Power Palm User for 10 years, have a blackberry for work, and finally gave up my Palm for a HTC Evo 4g. Thus far, I have extremely mixed feelings. So here is a description of my current issue. My battery died a few nights ago, and I got stuck in a do loop where the device keeps rebooting but never gets to the navigation screen. The screens I see are:
* HTC Evo intro screen
* Sprint
* 4g with welcome tone
Followed by repeat of Sprint then 4g again and again............
I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I boot-up the kernel through the recovery mode on the phone butit failed to load so i just rebooted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc but the problem is i dintmake any kind of back up or recovery i think.
View 2 Replies View Relatedhow to fix a boot loop in rom .I am portind arom for lg p690 and it is boot loop..And can i find the reason of boot loop??
View 3 Replies View Relatedhow to root my phone but i had just installed the AIM app and got an instant message so i swipped down to unlock the screen and kept getting these error messages that all apps were force close and space full on both phone and SD card (i had previously gotten space full on the phone but i must have uninstalled about 8 sound board apps and the message stayed) then the phone went very slowly and the force close messages would not stop so i guess i did the stupid thing and held the power button and found it odd that the only option was power off so i shut it down and attempted to turn it back on and it showed the white screen with the HTC incredible and then the HTC brilliant and then the Verizon tsunami screen or splash or whatever it is but it kept repeating that cycle over and over again (note this was not from an attempted root) i can put it into recovery mode and i was wondering what i can do from the recovery screen and if i can root it from the recovery screen. I'm sorry but i have no idea on how to root but if someone could help it would be much appreciated. and thank you for reading my long winded post but i wanted to be as detailed as possible.
View 6 Replies View RelatedI turned off my N1 and when I turned it back on it never progressed passed the the N1 boot-up animation. I've taken the battery out multiple times, but it does the same thing. The animation starts up then freezes after ~3 seconds, then the animation starts again and it just repeats. Can anyone help me fix this?
View 10 Replies View RelatedI just got a 15 gb sd card. I backed up my old sd card and then transferred everything over to my new card. Installed it and turned on my phone and now I get stuck with in a boot loop. re-installing my old card and it boots ok. so I figured I could make a new nandroid back up and just restore it. where do nandroid backups get stored on the sd card? I have a nandriod folder but it doesn't seem to contain the one I just made. I'm running the latest fresh 3.2
View 14 Replies View Relatedis it tru that rooting with unrevoked3 causes a boot loop with adsd+ roms im on leedroid 2.2b and have had some rebooting a lot if so can i do the rooting another way that will work better and if so wich method of rooting would be the best?
View 6 Replies View RelatedI know this topic has been discussed at length, but in weeks of searching, I can't seem to find any help with my particular problem. I've had my phone since July with no issues whatsoever. It's never been rooted. I got the Froyo update with no issues. I hadn't installed any new apps, just updated the ones I had as normal. Now, after a few minutes of use of basically any program, the phone reboots itself and gets stuck in a boot loop. I've done factory resets, and the phone is now completely stock - the only "extra" thing is my email accounts through Google. I got stuck in a loop last night, powered the phone off through HBoot and let it charge overnight. When I got up this morning, unplugged it, powered it on, within a few minutes, it's rebooting again. It seems if it was a hardware issue, it would've come up before now. I should also mention this happens with our without SD card, after formatting the SD card on the phone and the computer. I hate to say this, but I'm kind of missing the days of BB where I could wipe the OS and start with a clean slate. It almost seems like something in my OS is corrupt, but I haven't messed with that side of the INC to know how to fix it. I just noticed this morning that my signal shows no bars, but I'm able to make calls, texts, etc. Also, it hasn't (knock on wood) rebooted during a phone call, but will immediately after hanging up.
View 6 Replies View RelatedA lot of people including me have been having trouble with boot loops or get stuck on the Motorola Symbol after messing around while rooting. In this post I will post some instructions on how to get out of this and get your phone back to normal.
Credit to files goes to CRPercodani and UBRocked for files and instructions from another thread.
1) Download the following drivers, programs, and files.
How to recover from bootloop?
My phone is a Starmobile Icon (a rebanded i-mobile IQ1.1).
It happened when i installed the Chainfire3d.
i dont have any backups yet
I was running Team Jellybeans V5 No Problem for the last little while (on my T959d)Everything worked great (minus a few glitches here and there of course)Saw the update for V6, downloaded, and flashed with CWM.
Did the wipes, (cache, dalvik and factory) did the wipes again after reboot,Now Im stuck in an infinite bootloop, (goes to samsung splash, then Devilkernel Splash, then CWM where it shows cannot mount e:/ (cycles too quick I can't see it..) then it just reboots and continues, I can't boot the phone into CWM recovery, can't boot into download mode, tried USB JIG, doesnt do anything,I can't adb my phone, can't ODIN..
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 6.0.1.0. Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc..how to get CM9 or CM10 running?
Code:
--------- beginning of /dev/log/main
I/cm ( 70): Welcome to Android 4.0.4 / CyanogenMod-9-20120721-UNOFFICIAL-907
I/cm ( 71): _
I/cm ( 72): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 73): ((_ (/'((_( ((( ((_)((_( (('((( ((`1( ((_)((_(
[code]....
I spoofed my device S6312 to galaxy nexus using network spoofer to download an incompatible game from google play store.According to network spoofer everything worked great but nothing actually happened and that game was still incompatible on play store.So I launched network spoofer and told it to recover my device again to S6102.It said that the device will reboot so I gave it permissions and my device started rebooting but it stop at the Samsung logo and was doing the same thing again and again so s actually boot looping. How to recover my device and any way to do it without a computer.
View 1 Replies View RelatedMy galaxy s3 is rooted and cwm installed.I have changed a default dpi and rebooted to find my self in constant boot loop.I'm at the brink of flashing my rom to a custom one to see if it works but very scared to do so especially not knowing much about it.I have performed hard reset by going into recovery mode but it didn't work.
View 9 Replies View RelatedMy Droid Eris started a boot loop about 2 days ago (the usual complaint - the skateboarding droids, the htc logo, then verizon and htc endless loop). I went to do a soft reset, removed the battery, did a hard reset, nothing works - but here's the kicker - when it loads the fastboot/recovery/clear storage/simlock screen, it says that my file PB00IMG.zip is the wrong image and jumps off the screen within 2 seconds as it loads. I cannot get my computer to mount either - it does not always recognize it, and when it does, it will not let me in to the SD card to overwrite another one. Periodically, it even gives me a lovely phone with red triangle and an exclamation point.
If I had to guess, I'm assuming that that file is the core to me booting the OS (which is still the stock OS at this point)...but somehow it is not working. Or maybe its more than just that...I'm not really sure what to go into next - I know more about playing with registry errors on a desktop than phone software - but I'm willing to tinker and learn. I'm open to any ideas since I have a backup phone temporarily while I make it the 7 days to my next upgrade, but would really like to get this one working if I can. I can't send it in to verizon, since they are saying that it is "water damaged" (even though it has never touched water!) and want to charge me 90 dollars for a refurbished one.
I have a DROID that has been flashed to cricket. I woke up this morning and the phone was working just fine. I went to turn on music and noticed all of my music was gone. I started my anti virus to see if maybe something there was causing an issue, and during the scan my music showed up. My phone started running really slow and some pop-ups started showing up stating that "whatever the name was" application has not responded with three options "Force close, wait, and report" When I got frustrated enough to pull the battery, I started getting a boot loop. In the past I get the loop anytime I pull the battery, but if I let it run for 3 or 4 boots, the phone works just fine and I go on with my life. This morning I was not able to get back to "just fine" And the phone has been in an infinite loop all day. I have had it charging, I have tried disconnecting the battery and all the options the forums online have stated.
I can boot into recovery, and about every 6-10 boots the main screen will come up after the eye. I get the main screen with my lock code, the time, notification that I have a voicemail, and "no service" with 0 bars. I get that for about 3-10 seconds, and the phone reboots starting yet again at the white droid symbol screen. While in recovery mode I have been able to navigate around the recovery screens. When I try to do a recovery though, I get "Error: nandroid exited with status 20" if I try to do a backup I get the same error just with status "36" I have no idea where do go from here. I have read that if I flash the SPRecovery it will fix the boot loop, but the biggest thing I am worried about here is loosing my Cricket flash. I do not know how all of this stuff works, so if I am calling the Cricket "flash" wrong, please by all means correct me. If I can flash the SPRecovery while keeping my provider's "flash," or whatever you want to call it, are there instructions on how to do this flash of the SPRecovery? I have recently gotten my entry code in fast enough to get the background to show up. I have a loader app loaded and it showed all the icons at the bottom of the screen, but after a few seconds the phone went back into a boot loop. It showed the correct background, but it didn't show any of the applications loaded. I have let the phone reboot twice since starting this response, and got the same result. The second time I got my code in, I was able to see apps on the background, but a few short seconds later, the phone freezes and shuts off again. I see that I am making progress, but it has been hours so I am hoping there will be a quick answer to help me here.
I've followed this guide on this forum to get a2sd:
[APP] Darktremor A2SD (Apps2SD) version 2.7 Update 3r1 (2010-06-26) - xda-developers
And I have the Modaco mod, and I know it said there was a chance it could go wrong. But I tried nandroid restore and it didn't work, now I'm still in a boot loop, what should I do?
after my phone crashed / went unresponsive after a call I did what I've gotten used to doing which is taking out the battery to reset it. Though, this time I had the charger in which I'm guessing is what made the phone corrupt. Now I'm stuck in a boot loop with no way to reset it. Recovery mode doesn't help and I'm guessing there's no hardware reset button. I've never rooted or installed anything that's not from the free market.
I'm living in Sweden but bought it in Germany so am reluctant to go through the hassle of returning it. Or does samsung have som kind of world wide warranty?
trying a new Chevy kernel I went into boot loop. No biggie, I just booted into recovery and went back to my goto kernel. BUT, now that causes boot loops and in fact, any kernel I load - I have tried 4 - causes a boot loop. even my stable goto.
View 8 Replies View RelatedI have a rooted Stock 2.1 Dinc. Went to use the hydra kernel #1 and it put me into a boot loop. I am restoring my phone from backup so not a big deal but does anyone know why this may have occurred? I don't really need the overclock just thought I'd try it.
View 8 Replies View RelatedNo matter what I do I cannot get around the boot loop.First I was trying to flash the CM Remix ROM, which ended in a boot loop.I then tried just JRummy's ROM, ended it boot loop.I wiped data, cache and factory restored.Tried flashing CM Remix again, boot loop.Wiped again.Tried flashing a 1ghz kernel, boot loop.Where do I go to wipe system, boot, etc.? I'm starting to lose hope here.
View 19 Replies View RelatedI have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
I've never tried to hack my phone or do anything like that. I Simply wanted to restart my phone and it got stuck in a boot loop! Will i have to call sprint. I Dont want to do a factory reset.
View 1 Replies View RelatedSo i flashed my evo 3d to boost and now in a boot loop??? ive tried installing ruu's but nothing seems to work.
View 2 Replies View Relatedmy Sensation is stuck in boot loop every time i try to reboot it.
Unlocked
Pyramid PVT SHIP S-On RL
Hboot-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
I had been flashing roms with 4ext recovery since you can just use smartflash but after the last time I flashed a rom the rom wouldn't load and just kept rebooting the phone the the htc screen over and over again
i m using sony ericsson xperia arc s i have rooted my phone few days ago everything was ok i have root through flashtool method and i think 587 kenel was used. i dont know about roms kernel n etc etc i have read the thread and root my phone last night i tried to install font changer i granted superuser request and phone is restarting and then stuck on bootloop first it shows sony screen and then xperia screen and again restart and this process go on what should i do
View 4 Replies View RelatedI have a bricked Samsung Galaxy S2 and have been doing some research on how to fix this. There is a lot of info online, but I don't understand most of it as it is too technical and I need having it translated into layman's terms!
Context:
- Galaxy S2 (GT-I9100)
- Unlocked
- Purchased from Kogan 2 years ago (no longer under warranty)
- Appears to be Polish stock based on the packaging and manual
- I am in Australia
Problem:
- Phone is stuck in boot loop, unable to get past the intro flash screen that says Samsung Galaxy S2 GT-I19100.
- It keeps resetting itself and going back to flash screen infinitely. I need to remove the battery in order for it to stop doing that.
- I'm unable to get into the mode that would allow me to do a factory reset, however I am able to get into download mode.
What I think I need to do, but need verifying:
- Download Odin onto my PC. (I think Odin is software that allows me to access the core of the phone via my PC, is this correct?)
- Download the correct version of the operating system. From what I can gather, there are different versions depending upon which network you are with. Because my phone is unlocked, I need to get an unlocked version but I'm not sure whether I should get one designed for Australia or for Poland (or whether it matters)?
- Connect PC and phone via USB cable
- Turn on Odin
- Somehow use Odin to reinstall O/S on my phone
Questions:
- Are the steps above correct or am I missing something?
- Does it matter which version of Odin I install or can I just do a google search for Odin downloads?
- Where do I find the file I need to reinstall the O/S?
- Where can I find instructions on how to use Odin once I have the correct file to install?
i had a custom rom gingerbread and then i wanted to do a factory reset to go back to the stock room , instead this give me big problems. it is stuck on the lg screen and i try to go into recovery and alit says is do not pull out battery Formatting data , Formatting cache and Factory reset and this it goes right back into the lg screen where it gets stuck . My computer recongizes my phone but i dont know how to use adb commands thing like a pro . i have everything i need in the folder "backup" in the clockwordmod folder .
View 3 Replies View Relatedguide to get out of boot loop i did a wipe user data and factory reset on the settings menu and now i only get a lg logo and a animation of a android with a cube coming out of his torso area.
View 3 Replies View Related