I bought the zagg at bb today. They installed it and I dont like it at all. It does not look good, the texture is is not smooth, and it does not work well with swype. They said let it cure for 2 days. If i remove it does it come off clean?It may protect good but the cheap ones at verizon look better.
View 6 Replies
Installed the IS on 2 incredibles this evening.Everything went well, they look great. Just a few tiny bubbles that should dry up.The phones have been "resting" for about 6 hours now. I plan on waiting the full 24 hours before i put the batteries back in and turn them on. I started reading some posts on other forums about how people have messed up their phones with water damage after installing the IS. Just wanted to see if anyone was having any trouble after installing the IS.I tried not to use alot of water, but there was some water coming out from under the IS when i was squeegeeing the bubbles out.Going to be a worrisome 24 hrs.
View 14 Replies View RelatedIs it just me, or are they hard to put on? I used one of the 50% off coupons to pick up a shield for 10 bucks. When I got it, it took me 3-4 times to put it on, and still there were bubbles, even after 24 hours of drying.I contacted them and they were pretty much no help as I did everything already that they suggested.So I went to Best Buy today to pick up another one and to have them them install it for $7.99. It looks FANTASTIC. It took him about 3 minutes to do! They did have their own bottle of some liquid not the standard one that came in the package. Anyway, if you have trouble or want it done right, have them do it!
View 49 Replies View RelatedWhat's your vote? They both look like strong contenders but it also looks like the Inv.Shields are thin and stretchy and the Clarivue are more stiff. Wouldn't stiffness aid in easy installation and fewer bubbles.How do these screens look through polarized sunglasses?
View 6 Replies View RelatedI went to BB and they had them in and I had them apply it to my DI. After I had payed the guy tells me not to put the caase back on my phone or use it for at least 6 hours.I was like what if I knew that I would have waited and put it on myself later tonight.
View 13 Replies View RelatedI don't know if this means anything, but I just got a shipping email from ZAGG for my invisible shield HTC EVO 4G. I ordered last week, and it is shipping today. I ordered the screen-only protector, because I plan on using a hard shell case for the back.
View 49 Replies View RelatedAnd my finger doesn't glide over the screen as easily as it did before. I am hoping it is just some residue that will come off. Has anyone experienced this before? I tried wiping the screen down with a damp cloth but it didn't help.
View 40 Replies View RelatedLooking at getting one of them.Pros and Cons.
View 12 Replies View RelatedI recently ordered the invisibleshield protector for the screen of my droid, but it seems the concensus around here is that boxwave is the best.Is there anyone here who uses invisibleshield who can tell me what they think of it? I may send it back for a boxwave when it arrives if i decide to.
View 3 Replies View RelatedThinking about getting the zagg invisible shield front and back. I'm wondering how you guys like it. Particulary interested in how you guys like it with the back shield.
View 2 Replies View Relatedi added some buttons in HorizontalScrollView and its working fine. But I want to remove/invisible the scrollbar, instead of scroll bar i want to use greater than > and less than < images of both sides of scrollView, on clicking on that greater_than image i want to scroll it to right side. how can i do that.
View 3 Replies View RelatedHow can I remove a button in android, or make it invisible.
View 2 Replies View RelatedI accidentally ordered too many Zagg Invisible Shields Lol. I only ordered one extra so instead of going through Zagg to get a refund I decided to give back to community. Just send me a short PM explaining why you need it. I will pick my winner sometime tomorrow and hopefully have it sent in the mail by Wednesday. It's just the front cover screen and install kit.
View 10 Replies View RelatedLooks pretty craptacular right now. I know I'm supposed to give it another 12-24 hours to dry and "cure" (although I seem to recall seeing the timeframe of 24-48 hours on this board, anyone vouch for that?), but I'm a little concerned.Sorry for the huge crappy pic, had to take it with my old phone. But you can see the smears and lines. Those are what I'm worried about. Anyone who's used a Zagg able to comment on whether those disappear in the curing process? I'll be sure to post better pics when it's completely dried for people.
View 14 Replies View RelatedI have recently came across a problem with my text messaging on my HTC Incredible.. I was deleting a thread because it was too large. As it was deleting I received a text from that person and now my phone thinks there is a new message that I have not checked and it keeps popping up in my status bar. Anyone know how to get rid of this?
View 7 Replies View RelatedThis is a question to all the longer term users of the phone. I've had several phones before, all new and shiny in the beginning but before too long their facade starts to come off. Finishing, body, etc. How good is the desire in this respect?
- How many nicks have you got on yours? Does it get scratched easily? I mean the touchscreen as well as the body.
- Does the body colour come off easily?
- Are there any parts of the phone where dust accumulates?
- Does the battery cover show signs of becoming loose?
- Do the volume rocker keys become loose?
Can the phone take a couple of falls? I've been handling my Desire like my own baby but it's only a matter of time before it slips from my hands I feel. Also I simply love the look of the phone, and don't want to put on a silicone or a body shield but if it's really necessary I shall.
A week ago I received the Invisible Shield from Zagg in the mail and was very excited. I read the instructions, saw some installation videos on youtube and after 1 hour of preparation i was ready for the install. The installation process is a nightmare as you have to apply the solution while keeping the shield from sticking to itself and its a PIA to align correctly. I installed the back cover first and after many tries I had it correctly aligned but it didn't fit perfectly meaning there were areas that the shield did not cover completeley such as corners which are the most prone to damage. Next I installed the screen protector OMFG what a POS. It had bubbles all over even after using the squegee card. I thought I'd give it a few days for them to clear up as Zagg claims that within 24 hrs they disappear. They did not go away and it made the screen look bad especially on a white background. Needless to say the smaller pieces are also a nightmare to install. Anyways, today I saw my phone and got tired of looking at that Zagg crap and at the sticky feel it gives the phone and took it off and went back to what I had before.I had the siliicone case from the sprint store and the screen protector from the sprint store which had worked perfectly since november: not a single scratch and no dust problems. So really beware of the Zagg products, at least I got it for free so it didn't hurt to throw it away.
View 49 Replies View RelatedIt fell off the bumber, no insurance, it got rolled over a few times. It still works fine, but the screen is completely shattered. I got a new one off ebay, actually did good, kept looking and got a brand new one, with the front cover (didn't have to separate the LCD from the glass) for $79. When I was taking it apart, instead of peeling up the whole information sticker off of the EMI shield, I peeled the thin layer of plastic off of it. My question is, is the metal that the information label is stuck to the EMI shield by itself? I would think that it is, but I want to make sure that the sticker is not some type of special material that has something to do with electromagnetic interference, and that by not putting the sticker back on I am subjecting myself or someone else to EMI. I know it is a weird question, but I'm just curious, does anybody know the answer? Here is a link to the part I am talking about.
View 2 Replies View RelatedWhy can't I connect to Hotspot Shield on Cyanogenmod 11(Xperia P)?
View 2 Replies View RelatedDoes anyone use the Zagg full body shield and if so what do you think about it? I have the neoprene case with mine and the Zagg screen protector though I heard these cases cause dust to collect through the volume rocker and thus getting under the screen.
View 3 Replies View RelatedAfter installing my invisible shield this morning, I turned the device over to replace the batter and low and behold the darn thing is a slightly deeper pink in the corner. The indicator itself isn't totally shot, but just the corner.Anything I can/should do, or am I just SOL?
View 39 Replies View RelatedIs there and IM app that has the same functionality of the windows Yahoo! IM in that it can allow you to appear either online or invisible by a selected contact (i.e. so you can appear available to some people and offline/ invisible) to others without modifying your contact lists or having to create multiple accounts? I currently have meebo and mundu IM but I don't believe either has this ability.
View 1 Replies View RelatedI have an app with Copy Protection on. Since a number of users have reported being unable to find the app on Market since upgrading to 2.1, I have researched the issue and copy protection seems to be the culprit. Turning off copy protection is the answer, but it seems that it leads to file access problems and can require a reinstall, which is not a very good user experience.
However, this ought to have been fixed in 1.6 which means I should be able to turn off copy protection and everything is ok. But some people have still encountered this issue and their users had to reinstall. So, my question is this, if I turn off copy protection, will all users have to reinstall the app? Will only 1.5 users have to reinstall (30%)?
My home wireless setting as invisible I set up doing manual by enter SSID, select WPA, and then enter password. But it said "Not in range, remembered"So, I added MAC address(my Evo) into router (DIR-655) setting. My Evo is Froyo 2.2 (unroot) But still nothing happened?
Believe me, I am not trying to create an invisible AlertDialog. But I believe I have one. I'm not making this up. Behavior: main activity starts and is completely unresponsive. No dialog appears. No Force close/ANR appears even after much time in this state. But if I push the back button, it becomes responsive again. This does not occur when debuggable is true in the manifest, so I can't investigate using the debugger. But I found out the following with log statements. MainActrivity:OnCreate starts another activity, a welcome screen. Main Activity: OnResume is called while the other activity is visible. OnResume creates the dialog and calls dlg.Show(); WelcomeActivity is dismissed. MainActivity:OnResume is called. The OnResume method is smart enough to note that the dialog has already been shown and does not create it again. MainActivity is unresponsive. No dialog in sight. When I push the back button, a log statement confirms that the OnCancelListener is called on the dialog. This is Nexus One with 2.2.1. As cool as an invisible dialog is, I'd rather not have it. Can I fix it?
View 9 Replies View RelatedI have a listview that's using a custom adapter. I want to dynamically show/remove items from the listview. I've tried everything inside the getView() method in my view adapter. I've tried doing setVisiblity(View.GONE) on the view I'm returning. And it infact doesn't draw the view, but it allocates space for the view and it's just a blank black space.
Is this even possible to set items in listview invisible?
When I hit the "Phone" button to dial a number, the dial pad is invisible. I can still toggle the dial pad with the button on the bottom left, but the numbers are missing. I have tried rebooting with no luck. Aside from uninstalling programs I have installed.
View 9 Replies View RelatedIs their such a thing as Invisible Mode in whatsapp? And can it be done per contact ?By Invisible mode I mean that no one can see if I'm online and can't see the last time I was online.
View 4 Replies View RelatedI was wondering if there was a transparent lock pattern for the evo. I found this : Invisible Lockscreen Pattern for Android but have no idea what to do with it or how to use it.
View 3 Replies View RelatedIn testing my app across different OS versions I've noticed what appears to be carriage returns showing as visible squares in TextView. This doesn't happen on Froyo wondering if anyone knows how get around this in previous versions?
View 2 Replies View Related