I attempted to install HBOOT 92 from Adrnalyne's website and failed. It would constantly boot into HBOOT. I did a nandroid restore and all is well. Anyone else have a problem installing the new HBOOT?
View 16 Replies
Is there anyone that can give me step by step instructions on how to use hboot to install files from the root directory on my sd card. Ex.
This is what I did: I downloaded Clockworkmod 2.5.0.5, renamed the Clockworkmod zip to PB31IMG.zip, and placed it on the root of my SD card. Power-off, and boot into HBOOT (pressing the down vol+power button).
Then I downloaded Superuser 2.3.6.1 and place it on the SD card, use Clockworkmod Recovery and choose "Install .zip from SD" option.
Restarted my phone, and there's Superuser."
I have tried going through hboot and never see these files once I have installed them on the SD card.
I have read conflicting things, so I come to the experts. My phone is on hboot 0.77 - is this OK to install the OTA 2.2? I have read that 0.77 may send the phone into an endless boot loop if you install Froyo.
View 6 Replies View RelatedI'm following the directions found here to root my EVO, but whenever I try to install the HBOOT USB drivers, I get an error: "The system cannot find the file specified."
I'm running Windows 7 32 bit on an AMD processor.
In my attempt to install the MUIU Rom I am having trouble upgrading my Hboot to .92. Ive downloaded it from various links provided, put it in the root of my sd, rebooted into hboot, waited, saw it check the PB31IMG.zip.....then nothing. It doesn't prompt me to do anything....
View 5 Replies View RelatedWhat does boot into hboot mean? Is it just powering off the phone then holding down the volume button and press power? If so then can someone explain to me when I download a called PB31IMG.zip and put it into my sdcard then boot my phone up it does not say anything about an update. For instance, I want to update my radio from 1.00.03.04.06 to 2.15.00.07.28.
View 3 Replies View RelatedSo, I downgraded to stock recovery to get the OTA2.2, I had problems doing so, but finally was able to get it to be stock recovery with s-off and running HBOOT .79, would I need .77 to get the OTA or no?
View 25 Replies View RelatedWhen I reboot in recovery, it looks like my HBOOT version in .77. Someone in one of the threads mentioned that .77 and .79 were floating around as the safe options. How can I upgrade HBOOT versions, and with everything running fine, is there any benefit to upgrading? I'm running unrevoked forever, second wave rom, and newest radio leak if that matters.
View 4 Replies View RelatedI had 2.1 rooted with S-OFF
I wasn't able to update to 2.2 via OTA so I found an update.zip
I attempted to load the update.zip but it failed
Using [VIDEO] HowTo UnRoot Incredible by downgrading I downgraded to stock 2.1 but for some stupid reason I also disabled unrevoked forever and went to S-ON
I then applied the May OTA update Getting your phone ready for the FroYo update.zip!
Following that I applied the 2.2 update.zip
Here are the versions I'm on:
HBOOT-0.92.0000
RADIO-2.15.00.07.28
Now I'm trying to apply unrevoked3 and it fails
I found 2.1 stock to 2.2 rooted (with links to files)
I tried to downgrade to stock again and I now get this error:
Main Version is older!
Update Fail!
Do you want to reboot the device?
From what I understand I'm unable to downgrade to stock due to having an updated HBOOT
I've found instructions on how to downgrade HBOOT How to revert back to an earlier version of HBOOT but it seems I need clockworkmod to do that
So my question is. Is there a way I can proceed from here or am I stuck waiting for an official root for 2.2?
I upgraded my radio was when 2.05 was released (1.0 -> 2.05), so I'm not sure if risks are the same given that we now have S-OFF.
Previously (when I upgraded) there were bricks that would occur if the same radio was flashed twice. I cannot remember whether the method of radio upgrading was done via HBOOT or Recovery. If the risk is still there, can I upgrade from 2.05 to 2.15, or should I downgrade to 1.0 then upgrade?
As far as HBOOT goes, I have never upgraded my HBOOT, I'm either running on 0.77 or 0.79, but I want to play around with some of the newer roms. Regardless, is HBOOT 0.92 an official release, or is it a user contributed release?
I root my phone, installed Fourth Wave without a hiccup. I do my co-workers phone the same way and now he is stuck in HBoot. Radio won't update either. I removed the battery for 20min and tried, no luck. Goes right into HBoot. Anyway to get the phone back to normal?
View 11 Replies View RelatedSo, I flashed .92 hboot from adrynalynes website and it is stuck in some kind of weird hboot boot loop. When I try to reboot it just goes black and comes back to this screen. I can get to clockwork and do and nandroid backup, but I just wanted to know what potentially caused this so I can avoid this in the future.
View 5 Replies View RelatedThis mostly applies to folks who have flashed the leaked ota and want to go back to legit stock. There is generally a problem with that, because we cannot use the RUU due to the upgraded Hboot (no radio has nothing to do with it).
Through my travels, I found a way to do it.
This is not without its risks, and I take no responsibility for any broken phones, knocked up cats, or homeless hamsters caused from the havoc it may wreak.
It did work for me, quite well. I was able to flash to an old RUU without issue like nothing ever happened.
First, the link I used, and then the english version.
[HOW-TO] Downgrade HBOOT - HTCPedia.com forums
Need the RUU?
http://www.mediafire.com/?ld1gm3bbddcbwdw
Now, my instructions, which will hopefully simplify it. I take no credit for this by the way, credit is due to the original thread.
1. Download and unzip the files I have attached to this thread and put them somewhere that you can push them with adb.
2. You must used Unrevoked's latest tool to install clockwork.
3. Boot into clockwork recovery, go to partitions, and mount data.
4. Type this code...
So I downloaded the unroot file, installed it onto the SD card (formatted by the phone), and when I load Hboot it finds no update. It just brings up the normal menu (fastboot, clear storage, simlock, etc.).
View 7 Replies View RelatedI'm trying to update my SDK but every time I get this same warning dialog:
-= Waning! =- A folder failed to be renamed or moved.
The folder is <ANDROID_SDK>/tools. I searched for help in this group about this error and found some answers. But none of them worked for me. Looking at Process Explorer tool I found that the problem is the "java.exe" that is keeping several JAR file handles opened in that directory. Closing the handles hangs the "java.exe". What can I do? I am stuck in this step.
I'm trying to install 2.1 on my girlfriends phone, but when I try to update the firmware it says "update not found"
View 1 Replies View RelatedI follow the instruction to install my toy application, which ran well on my Mac.
1. Within Eclipse, I did "Android Tools-->Export Unsigned Application Package" to save MyApplication.apk into ~/workspace/MyApplication.apk.
2. Now Connect Your G1 Phone to your computer using USB cable. You need to install Drivers for this. Download Android USB drivers from here. This driver is required for adb to interface with an android G1 phone using USB cable.
3. Go to Android Settings/SD card & phone storage and disable Use for USB storage. You can enable it again later after you installed your third-party application.
4. Go to Settings/Application settings and enable Unknown sources.
5. adb install ~/workspace/MyApplication.apk
But this is the error I got: tools > ./adb install ~/Documents/workspace/MyApplication.apk 1644 KB/s (214695 bytes in 0.127s)
pkg: /data/local/tmp/MyApplication.apk Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
Lately anytime I go to download a app from The Marketplace, the updated versioo of the app will download and but fail to install. I have plenty of room on my phones internal memory and I have full 3G service. Any sugestions on what could be causing this probelm.
Today it happen with Foursquare and Wordfeud, yesterday it was Fruit Ninja. Im using an HTC EVO 4G 2.2
I am using htc Desire S and I have installed 4EXT Recovery 2.2.7 RC5.
My HBOOT Version is 2.00.002.
Just now I tried many times (even trying with different SD cards) but I failed to install Endymion V3.5 (Link below) [URL]
The problem is: When I installed, and reboot, it shows "htc" in green words with bright white background, then all black, then "htc" in green words with white background again, then it boots into 4EXT Recovery 2.2.7 RC5.
I used "wipe all partitions except SD card". Then install from SD card, choosing the correct zip file (And it also shows to me that I have successfully installed the ROM)
I then tried to use another ROM: [URL]
This one, it successfully does not boot me into Recovery, but it remains on the booting screen for more than 10 minutes, so I suspect it also failed...
I then continued to try this: [URL]
THE PROBLEM IS THE SAME AS INSTALLING ENDYMION!!
Finally, I reinstalled my old ROM: [URL]
AND IT SUCCEEDED.
=================================
Now I suspect it was the problem of Andriod version, those ROM which booted into recovery are all (though only 2) 2.3.5
Any other thing (except full wipe) I need to do or change or make sure, before installing Endymion V3.5?
(I even tried both EXT3 and EXT4. Also failed.......)
I get this error when i try to install my app from eclipse on my htc magic.
Installation error: INSTALL_FAILED_MISSING_SHARED_LIBRARY
Please check logcat output for more details.
Launch canceled!
Logcat says: at.tomtasche.altitude requires unavailable shared library com.google.android.maps; failing! I developed an app with google maps before and there it works fine. And yes i have the uses-library android:name="com.google.android.maps" in the application tag of my manifest. It also works in the emulator, just my device dont install it.
mybackup restored the icons where my apps used to be but they won't download from the market. It just says starting download but never starts.
View 6 Replies View RelatedI tried to download CoPilot to my hero, I got as far as adding all my details and the credit card details. After I clicked the buy now button it greyed out and nothing happened. What now?? And will I be charged? I checked my bank to see if there was a payment taken but nothing so far.
View 9 Replies View RelatedI have some problem installing my apk file in code. Wondering if anyone could find out what I did wrong.
What I was trying to do is put a Check Upgrade function in our program. When user clicks it, it will send request to our web server and find out what is the latest version. I use app versionName to stamp a version, something like 2010.11.23. I don't use the version code in Manifest.xml file. So our program sees the latest VersionName is later than itself, it will download the latest one, and then use the following code to install the new apk file:
CODE:........
Now looks like, everytime when I changed the VersionName, it will fail to install the apk file. It downloads the file fine. I don't know exactly why. Sometimes, in Eclips, when I hit debug, I got error saying "Re-installation failed due to different application signatures". I don't know if this is the same error caused the installation failed.
So, looks like my questions are:
Should that upgrade logic work? I am wondering if it has something to do with the VersoinName.
What could cause the application signature change? (I did sign our program before I put it on our server, but I always use the same key file for different versionName. )
I have a Samsung Galaxy Vibrant and all I want to do is upload my photos that I've taken. I plug in the phone in the USB and it tries to install the drivers. But each time Failed. What am I doing wrong? I've only had the phone a week. I am ready to take it back.
View 3 Replies View RelatedHad about 30 megabytes open, and did not check on Fennec size. Install failed, due to lack of space. But, now I show 249 of 261 megs used. I not sure why, if the installed failed, how any space was used. And, did not find any apps installed under Fenenc or Mozilla. Also, when I try to update other apps, the update process starts, but never completes.How can I find what did install and delete it, or regain my free space.
View 2 Replies View RelatedDevice driver failed to install
View 10 Replies View RelatedI should have just left it as it was out of the box..So after attempting to install a custom rom (4.4.2 Play edition)my s4 is stuck at the Samsung I9505 boot screen. I wiped the 'Dalvik cache' 'System' and 'cache' partitions in TWRP as I was following along with a Youtube video (that didn't work). When I tried to flash the custom ROM it automatically said failed. After giving up and turning on the phone I found that I'm stuck at this screen.
Have I bricked the phone? $550 could have gone down the drain just like that. I don't want to touch it without any advice and make everything worse. My only hope now is that I've managed to wipe the original software and it has nothing to boot from.
Why did the ROM install fail in the first place? I had it copied on the SD card. It was zip file.I can still access TWRP just fine and my SD shows up with the custom ROM still there, it's just whenever I hit install it fails in under a second.
it keep failed to download and install apps on my phone.?
View 16 Replies View Relatedwheni try to install velocity v.3 i get an error that says verification process failed, and that i have a corrupt ringtone in E:/system/media/ringtones.
View 7 Replies View RelatedWhen i update my phone through the update software, i follow all steps correct and after downloading, and installation to the phone till about 99% of progress installation, says always "Failed to install updates" and i remove cable and restart the phone, it installs and customize the system, it says every time updates availble after that..
View 1 Replies View Related