A) The data network access doesn't work anymore. B) The touch screen is not responsive freezes a lot.C) The text messaging freezes then sends out 20 of the same message.And I have done numerous battery breaks.
View 4 Replies
I've had an HTC Desire on Orange in the UK for about 6 weeks and it is having persistent problem. Firstly despite having a strong 4-bar out of 4 signal, online services and the internet do not work at all when a 3G signal is being received (e.g. news, weather, all widgets, internet, email etc).Calls and texts do work however with a 3G signal.But when a 3g+ signal (HSDPA) is being received, all internet services as above work fine.However, when a 3+ signal is being received, the phone does not make or receive calls or text messages, and often fails to send texts. Calls I make immediately shut down (bleep + �call ended�), and incoming calls from other people go straight to answerphone. Also often when turning the data connection on/off, it freezes and has to be rebooted, and turning airplane setting on and off does not fix the problem.
I have also tried the different network settings (GSM, WCDMA, auto, etc). �GSM� sends and receives calls and texts but doesn�t work (or is incredibly slow) with internet, and �auto� and �WCDMA only� show the problems as above.I don't think this is a network/coverage issues as, as I have seen many people reporting these same issues on other networks and in other parts of the UK, and I have read that other people are having to manually turn off HSDPA to be able to make calls (using an app?). Even if I can stop HSDPA from connecting to make sure the phone works, I still can�t use the internet at all on 3g � even GSM works better!
Finally, when I connect to a bluetooth device (e.g. car and headphones) the phone will connect briefly, and then randomly disconnect. I have also seen this issue reported elsewhere.I very much like the phone and don't want to get rid of it, but these problems are making the phone unuseable.Also I don't know if I should be contacting HTC or Orange about this. Will the upcoming Android 2.2 fix these problems?Anyone know how to fix this or if I need a new handset? Are there any apps that can help? Also does the Nexus One have these problems and are they fixed by Froyo?
I just got an HTC Desire that was locked to Telus (Canadian Carrier). I have read that numerous people are using it on Rogers network. From the day I got it when I put my rogers sim card in (the right way) it said "No SIM card in phone" so I could not enter an unlock code. Thinking the SIM was defective went to Telus and tried one of their sim cards and it worked fine, then I went to Rogers thinking it was a problematic card. We tried 4 cards and none of them worked. I then went to Bell (another canadian carrier) and tried their sim card. It worked as well but said that the phone was locked. I purchased an unlock code from the internet which worked. Now the Bell sim card works as well becuase the phone is unlocked. I put my Rogers SIM back into it and it still sais "No SIM card in phone". I also tried a SIM from a european company and it did not work as well. This HTC Desire works on the same 3G 850/1900 GSM that Rogers uses.
View 7 Replies View RelatedIs anyone else not getting a mobile internet connection right now? This has happened before on Orange but it's different this time because my phone doesn't seem to be searching for a network to join (before in the settings it would say "searching" or something and be greyed out but not this time)
Hopefully it's just a network problem, rather than my phone
I've managed to fix it i think. It would seem something I installed (im thinking SwitchPro Widget) changed the APN name in the settings to orangeinternet_off.
I don't have a SIM inserted. I have firmware "2.1-update1". If I connect to WiFi and go to system software updates it says "there are no updates available for your phone". Do I actually need to be connected to a network to update to froyo? I'm in Australia.
View 4 Replies View RelatedI have an Unlocked telus Desire on the Sasktel network I was wondering as the phone is currently running 2.1 when will the 2.2 update come? Will I have to wait for telus and if so will I get the update or not because I am now registered on Sasktel?
View 2 Replies View RelatedThe weather just suddenly stopped working yesterday. I didn't change anything. I turned off the phone and back on, still with the same problem. I use wifi on it everyday, so I assume it would update but doesn't.
View 3 Replies View RelatedProbably a very simple fix here, but I can't figure it out. I deleted a few roms off of my sd card to make room for the new warm 2.2 release and went to flash it. For some reason, when I'm in the boot screen, I select recovery, but it doesn't boot into the actual recovery mode anymore, it goes to another white screen which I think is the fastboot screen.
View 6 Replies View RelatedI've recently updated my Samsung Galaxy S4 to android 4.4.2 kitkat. Since then I've been unable to connect to the internet through mobile data. It can be activated/deactivated, but when activated I cannot connect to any websites.
View 7 Replies View RelatedAs written in the title, the time-out screen doesn't work anymore on my 4 days old htc magic.
View 1 Replies View RelatedATM i am using SG2 with ICS 4.0.3.
2 months ago before it upgraded itselve to curent version i instaled latest navigon without problems and it work pretty well. Since ICS is upgraded navigon doesen't work anymore. I tryed to DLL latest version of Navigon ( 4.1.1 ) and it doesent wan't to work. I can install it but when i open it up i get an error that im not connected to an internet connection or im not loged in to google play. my WI-FI is on and it don't want to work.
2.2 OTA, rooted via z4 root, superuser; wireless tether; deodex; revolution theme
Cannot get wireless tether to work anymore. It gets superuser permissions, My laptop detects the network, it connects to it, but I cannot load any pages and nothing is being sent up and down except for 3-4 kb.
I've tried uninstalling and reinstalling, resets, etc. My root seems to be fine.
I flashed wrong ROM with my device with odin, and my device doesn't work any more.
It looks like a real brick. It just stay in black screen. No vibration, No sound and No animation!! What can I do for my device?
I am developing on Windows machine.I was working quite well until yesterday, when I saw the the update prompt and updated my ADT plugin. Today when I tried debugging my test project, I experienced either one the following cases:
1) Logcat stops forever on the message "sending wait chunk".
2) Logcat shows the following message, and test project fails:
3) Eclipse stops responding.
The above cases happens even when the test unit contains nothing.Also it just doesn't not work in debug. The test case runs successfully if it is not in debug mode (But there are still some glitches, like Logcat sometimes won't emit debug messages).
I recently did the Telus OTA Froyo update and now I am wondering if I can still root my phone? Did I screw the pooch buy installing the update? And it would seem most of the benefits of rooting were addressed in the update but I am interested in overclocking, better apps and partitioning. Seems like even with the update I still can't move all my apps to my SD card as I thought I might be able to and I've been told that is the dev's problem and not Google but with rooting can more be moved to my SD?
View 3 Replies View RelatedUnlocked Telus HTC desire locked again after update? After upgrading to Telus Android 2.2 did my phone lock to Telus again?
View 15 Replies View Relatedi installed version 4.0.4 CM9 on my HTC CHACHA but it dosent connect to internet via phones mobile network? i have checked in settings and ticked the right options also but the phone only wants to connect to internet via WiFi. is there anything i can do to use phone network for internet?
View 1 Replies View RelatedBriefly, I need ONLY ONE of my apps to access the data mobile network while the other ones remain blocked but when I connect to a Wi-Fi I need them all to be connected, how can I do this?
View 2 Replies View RelatedAt the first loading of flashed rom checkbox "Data Allowed" in the Mobile Network Settings ENABLED by default.
I do not use unlimited Internet therefore.
I need some flashable patch update.zip which I can flash after the rom for switching this option to DISABLE.
It is Really? Where android save this setting?
I have so far found two bugs in Galaxo 1.6.3:
a) Speaker doesn't work in call (very weak). works well in ringtones etc.
b) Scrolling contacts by letter doesn't work.
Other than that this is a leap forward, especially with the overclock options!
Both bugs, as well as others, fixed in 1.6.3.1 update!
I recently bought a Telstra HTC Wildfire and unlocked it by code to use my 3 SIM card on it. However, after unlocking my mobile, when I choose the option "use phone for data connection when wi-fi is unavailable" it doesn't work. When i go to mobile network and network operators, I select to search for networks and the phone is automatically connected to "3Telstra(3G)". They also show 3(3G) and 3 networks, but when I try to select any of them, it says that the SIM card does not allow the connection to this network. I don't know if one thing is connected to the other, but I always used my old phone for data connection with the same SIM card.
View 7 Replies View RelatedI'm trying to clean up some code and now I'm determined to get this seemless ListView updating working...
I want my ListView to be updated when I call notifyDataSetChanged() but nothing happens... I'm also passing the autoRequery flag to true when creating my CursorAdapter.
Cursor c = FavoritesHandler.getCategoryFavorites(getSQLiteInstance(), category); m_favoriteAdapter.changeCursor(c); startManagingCursor(c);
I am using ICS Evervolv a5 on my N1. The mobile data connection works only if I don't connect to a WiFi network. If I do, the only way I have found to make it work again is to reboot the phone.
This means that while I am at home, everything works through WiFi, however, if I leave home, I have to reboot my phone once I am sure the phone is far enough from my WiFi access point to be able to connect. Then, it starts working with the cellular data plan
The only thing I can relate to this is that I have the "application protection" app installed, protecting the settings menu do with a code so my kids don't mess up with that. However, is still hard to believe that's the culprit.
Now that I've updated to 2.1, most of the apps (weather and time apps) no longer work correctly.I live in Panama City Beach but these apps continue to tell me I am slightly north of Tallahassee over 100 miles away and in a different time zone. Stays the same regardless of GPS on or off,I have deleted and re-installed all of the offending programs and that didn't help either.Everything was great prior to the update.
View 8 Replies View RelatedI did the manual MR2 upload now my GPS doesnt work any one else having that problem?
View 1 Replies View RelatedI'm building an android app which should perform a GET on my site to get two cookies and then perform a post to the same site with these cookies.
As mentioned I start of with the GET and I'm using org.apache.http.client.HttpClient to perform this operation.
CODE:..............
So far so good. Don't mind the requiredCookies line yet, it will be used in the Java.net impl since I can't get the HttpClient one to work =(.
Let's take a look at the non working HttpClient Post part.
CODE:............
What happens now is that I perform a POST with the localContext where the cookies are stored. This doesn't work. I get a HTTP/1.1 401 No session. Since I had no luck with this I tried another approach(java.net.HttpURLConnection). Remember I still use the same GET part
CODE:.............
And VIOLA a 200 is displayed and everything works like a charm.
when I turn on google maps or navigation this message appear (this application requires a working data connection)
View 2 Replies View RelatedIs it possible to create a sort of wifi lan network (i.e., make the captivate work as a local area network router without internet access)? this could potentially be useful: quick filesharing, improvised LAN for games, etc...
View 1 Replies View RelatedI have this code for update:
public Boolean update() {
try {data.put(Contacts Contract.Groups.SHOULD_SYNC, true);
Content Resolver cr = ctx.get Content Resolver();
Uri uri = Content Uris.with Appended Id(Contacts Contract.Groups.CONTENT_URI, Long.parse Long(get Id()));
int mid = cr.update(uri, data,_ID+"="+get Id(), null);
// notify registered observers that a row was updated
ctx.get Content Resolver().notify Change(
Contacts Contract.Groups.CONTENT_URI, null);
if (-1 == mid)
return false;
return true;
} catch (Exception e) {
Log.v(TAG(), e.get Message(), e);
return false.
i have an android app, with a actitity, that shows a map, with a position. This possition is updated on sharedPreferences with a service... ok, that works fine. I need that my activity implements runnable to be a thread that read's the position of sharedPreferences each 1000ms and then update the item position on the map... but it doesn't works. As i saw in debug mode, my thread doesn't work fine, ONLY ENTER ONE TIME on RUN() method... i mean that never enters into RUN() method again, only one time, cause this, the positions doesn't be updated on the map. What is wrong? why this thread doesn't work fine?
public class Locate extends MapActivity{
private TextView userText = null;
private TextView permissionText = null;
private TextView lastUpdateText = null;
private Button locateButton = null;.............