General :: Get Jelly Bean To Recognize SkyDrive For Cloud Service?
Dec 29, 2012
OK, new to Droid, moved over from Windows Phone. I've got a nice account setup already with SkyDrive along now with the Samsung Cloud thing and Dropbox. For some reason, DropBox has not upgraded me to the larger size account like they should have after I registered my new Note2 device and did all the other things they say you have to do in order to get granted the larger file allotment.
So, anyway, I have a 25gb account already setup with Skydrive and have quite a few files on there that I use regularly. I have a couple of the browsers on my phone and they work well to gain access to the files and such. What I really want is to actually add SkyDrive to my Cloud. When I go to Settings, Cloud, it shows Samsung and Dropbox, but does not give me any option to install or gain access to Skydrive. Is there some way I can install this on my phone and get the system to recognize it as another option for my Cloud services?
View 5 Replies
Mar 2, 2014
I just updated my S3 to 4.3 (my network is 3 - UK) and the phone is so slow! All programs crash after a few minutes of going onto them. I keep getting messages like "unfortunately the process com.android.phone has stopped".
Also I have no mobile network!! Everytime I click on mobile data is tells me to "insert an active sim to access network" but when I put the sim in my brothers phone the sim works.
I really don't want to do a factory reset as I have a lot of internal things saved such as pics and whatsapp conversations that I really need!
Is it possible to go back to 4.2?
View 1 Replies
View Related
Sep 26, 2013
I have free space on the internal memory of my phone that is not recognized for things like installing an app.
This is my phone:
Model: Motorola XT919
Android version: jelly bean 4.1.2
Internal memory: 4gb (really 2,2 gb free since the rest is used by the OS)
Rooted: Yes
I found out about this problem because I was running out of internal space so I inmediately checked the storage settings and I found this:
In the installed apps settings it shows 766 mb free of internal space But in the storage settings the things are different: As you can see, this time I only have 127 mb free of internal storage....
Just to be sure, I downloaded the app Storage Analyser and once again checked the internal storage free space: And this time shows 1,52 gb free...
Well the thing is that my phone considers as free space just the 127mb shown on storage settings, and I want the phone also uses the free space shown on the app settings or the one shown by storage analyser.
View 1 Replies
View Related
Nov 11, 2013
Exchange service is constantly running in the background. It runs one of one processes and that is SMS relay? Is this possible battery drainer, what purpose it serves and how to remove it? I do not use the mail application, only gmail with all syncs off. I'm assuming this sms relay is automatic text message retrieval?
EDIT: I also have Sprint ID constantly running. It's running an updater service. How could I safely remove it?
View 1 Replies
View Related
Jan 11, 2014
When trying to print from my stock device, I noticed that it was only willing to print to a Samsung printer. As the title suggests, the only printer available to me is an HP printer. And, as you may have guessed, the printer has ePrint.
I know HP has an ePrint app and Google has Cloud Print, which can both be used to print to the printer, but I don't want to have to go open an app every time I want to print something. I should be able to print something right from the app I'm using.
View 3 Replies
View Related
Sep 16, 2013
What is weird to me is that on the closeup line graph the second half plummets much faster than the first half. But at the same time, the second half doesn't nearly have as many wakelocks (as indicated by the "Awake" bar being basically completely empty during that time.
What the mobile network colours represent but I never had this problem previously with it on all the time so this shouldn't be an issue. GPS is always on. Again, this was never an issue until supposedly now so this also shouldn't be an issue.
Now, the four big drainers are Cell Standby, Android System, Google Services, and Android OS. Cell Standby I know is due to a missplaced decimal point in the framework, so I know that's just false battery recording. Android System I don't have a clue what the problem is, I read somewhere it might have to deal with wakelocks. But it won't tell me what process exactly is causing battery drain. Google Services are well, google services. I don't know what are classified as google services exactly (like this was never a problem before..), and finally Android OS. Again, the battery statistics thing isn't nearly specific enough.
View 4 Replies
View Related
Nov 29, 2013
I'm looking for a tutorial to Root and then revert back to JellyBean from KitKat on a Nexus 7 2013 2nd Gen, non carrier, WiFi only, or Whatever is required to switch back to JB from KK..
View 1 Replies
View Related
May 17, 2014
I have a Coolpad 8720L with its own interface built upon 4.3 Jelly Bean. It's not very good, and I'd like to install stock Android instead. How do I do this?
I heard that I have to root the device, and then find a ROM for stock Jelly Bean to load onto the device?
View 1 Replies
View Related
Sep 21, 2013
I just purchased my first ever cell phone ( Google LG Nexus 4 16gb ) . I have never used one before , just never had the need for one . How to use Android Jelly Bean 4.3 and also how to use this phone .
View 5 Replies
View Related
Dec 13, 2013
Best way I could describe it. On ICS the dialer would allow me to type a number and come back to it later, now when I multi-task the number disappears. I am running 4.1.2 on a HTC Desire 300, and the dialer is stock to the best of my knowledge.
View 4 Replies
View Related
Apr 9, 2014
The jellybean box itself turns on and the home screen loads up. I select the page where all the apps are...select xbmc app...sometimes it flicks back to main apps page other times the screen turns black/blank. I can't get further than this page....my box has worked perfectly for the past 3 months since purchasing. I can't get into the settings page as I can't get past the blank .
View 1 Replies
View Related
Dec 23, 2012
I have a Samsung Chromebook and I'm a user of GoogleDrive (Love them). Aside from GoogleDocs or moving my Office docs to SkyDrive is there a way to use MS Office on my Chromebook and specifically PowerPoint?
View 4 Replies
View Related
Aug 3, 2010
i wonder what is the name of the service in ClientLogin for Android cloud to device, i found this link for all the service but i didnt find C2DM in it .
View 1 Replies
View Related
Dec 12, 2012
Awaiting delivery of my Nexus 4 - 16GB, is there software to back up the phone data to my PC?
View 3 Replies
View Related
Mar 22, 2013
My bro has a note running jb. He has a secgallery app which I cant install on my xperia u wid ics
I always get an error "App not installed".
I have decompiled the app... But m nt a modder so I dun knw what changes to make in androidmanifest or some other folder to run it..
View 1 Replies
View Related
Sep 2, 2013
After I flashed a couple roms I couldn't boot jelly bean anymore and I noticed the error in recovery: E: Cant Mount /efs, when installing. But I could still boot ICS but not jellybean. I still had my IMEI and could make calls but could not boot jelly bean because it couldn't mount.
Sometimes when installing a rom something goes wrong and it changes the partition type of /efs making it unable to be mounted. The partition is usually from ext4 to swap.Most likely this will work on your phone but if it doesn't and your phone stops working I am not responsible.
If your like me and you couldn't get jelly bean to work then flash your device back to ics and it should boot. Once your booted inside of ics we can start the process.
Pre-Setup:
1. Be rooted and have a custom recovery installed.
2. Be on Ics and it boots.
3. Your need to have a Jelly Bean rom like Cyanogenmod on your sdcard.
4. Have adb installed on your pc and usb debugging on in your phone/tab.
Now that that's done its time to start.
Part One:
1. Boot into recovery.
2. We need to find the efs block location.
3. Go to mounts and select efs
4. It should say unable to mount
5. Go to advance and make a recovery.log
6. Put that file on your computer and open it.
7. Look through the file and you should fine something like this around the beginning of the file:
E:Unable to mount '/efs'..Actual block device: '/dev/block/mmcblk0p3', current file system: 'swap'..My location is /dev/block/mmcblk0p3 But yours could be different! Most likely the difference will be instead of it ending with a 3 it will be a different number. I will be saying /dev/block/mmcblk0p3 if yours is different just change it to your location.
*WARNING* Sometimes when you copy paste into adb it will auto run the command without you pressing enter. If your location is different then mine and you copy past and it auto runs it could be BAD so to be careful if you want to copy past. Copy the command paste it into Google make the change and copy that and paste into adb
Part Two:
1. When your inside recovery connect your phone to your computer and get into a adb shell. (Sometimes it will take awhile for adb to recognize your device so be patient.)
2. Once you have adb access its time to start entering the commands.(Again my location may be different the yours! Most likely the difference will be instead of it ending with a 3 it will be a different number.
Part Three Inside ADB:
1. su
2. dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
DONT REBOOT PHONE
Part Four On Your Phone:
1. Now /efs is mounted don't unmount it
2. Do a factory reset
3. Install your Jelly Bean rom
4. It should install without any errors
5. Boot your phone
6. If everything went well it should boot.
7. After it boots your signal notification most likely will be gray and internet or calls may not work
8. To fix just install gapps and it will be fixed
There you have it if everything went correctly your efs should be working good and you should be able to go back and do your normal rom flashing.
If jelly bean boots but you don't have phone do this:
1. Go back into recovery and get adb access.
2. su
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
6. dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
View 4 Replies
View Related
Jan 29, 2013
I just recently bought the Samsung Galaxy S II on the Straight Talk network. The phone comes stock with the Android Gingerbread 2.3.6 OS and I'd like to upgrade to the latest Android Jelly Bean 4.2 OS.
Here are the phone facts:
Network: Straight-Talk
Model Number: SGH-S959G
Android Version: 2.3.6
Kernal Version: 2.6.35.7
Build Number: GINGERBREAD.UDLG1
View 3 Replies
View Related
Aug 13, 2012
I came across a thread to get Jellybean animations on ICS, I did a search but I cannot find it. HTC Vision
View 1 Replies
View Related
Jan 31, 2014
I've got an replacement of my karbonn A2+ via company.
I want its backup and flash file..
View 2 Replies
View Related
Mar 6, 2013
Is it possible to upgrade HTC One V to Jellybean 4.2?I have tried running software update located in settings-->about phone but it says that there are no updates available.So is it possible to get jellybean 4.2 on my phone?Are there any risks involved?Can updating to jellybean harm my phone?btw my phone is rooted. What cyanogen mod is?Can i first install jellybean 4.2 and then install cyanogen mod?
View 1 Replies
View Related
Jun 5, 2013
im trying to port crt off and on ..on deodex'd stock rom..i had try'd these methods but it didnt work'd out on jelly bean..link for porting crt off on stock jelly bean rom for GT-i9082
i had try'd these methods but no use..
[URL]
View 1 Replies
View Related
Dec 27, 2012
I've attempted to build two different sources, one modified ICS AOSP and another from straight up JB AOSP. Both err on me.
JB spits out the following:
Quote:
make: *** No rule to make target `out/target/product/devicetest/obj/STATIC_LIBRARIES/lib_driver_cmd_wext_intermediates/export_includes', needed by `out/target/product/devicetest/obj/EXECUTABLES/wpa_supplicant_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C: wpa_cli <= external/wpa_supplicant_8/wpa_supplicant/src/utils/edit.c
I'd prefer to get JB working, but would be satisfied with ICS for now.
View 6 Replies
View Related
Sep 11, 2012
Running RemICS-JB on my infuse, hotmail won't connect. Tried using m.hotmail.com and debug-m.hotmail.com and neither worked.
View 2 Replies
View Related
Jul 19, 2010
Is it possible to create my own backup transport for my own cloud service I offer?
View 8 Replies
View Related
Dec 19, 2013
I'm looking to find jelly bean 4.1.1.
link to where I might be able to download this version?
View 2 Replies
View Related
Sep 28, 2013
i recently updated from ics to jelly bean 4.1.2 on my Samsung galaxy s2 on 02 uk network, i have noticed a few different issues since the update though regarding blocking calls and i notice the feature isnt as good since the update
previously on ics when blocking a number, once a number called they would be present with "dud a duh sound" which made the phone sound like the number was disconnected it would also not divert the blocked number to the voice mail
since doing a test on jelly bean when blocking a number, it now diverts them to the voice mail, and what's more annoying is once a blocked number calls it seems to one ring on my phone and then divert them to the voice mail, similar to as if i was cancelling there call every time, which is no were near as effective
ive just tried an app called mr number and this is the same, although this does have the option of a "hangup feature" and a send to "voicemail feature" again when the blocked number calls it seems to one ring and then either be disconnected or diverted to the voicemail, which again is like your cancelling there call every time after one ring
on ics when blocking the number they were never presented with the ring tone on there end, they were only presented with the sound of a disconnected line etc. How i can get that feature back???, without using mr number which doesn't do it as well
id like it to be like it was with ics, so basically the blocked number doesn't even get the chance to to be diverted to voice mail or to be not connected at all??? and certainly so it doesnt one ring on my end before the divert/block kicks in, on ics the blocked number never got that far, it was blocked instantly and presented with the disconnected sound, and then i was shown on my phone a log they had attempted to call., i also dont want to give the impression im cancelling the call on my end, as like ics, this was a good feature as certain people would just think your unreachable, know when a blocked contact calls with the new system under jelly bean it looks like your cancelling there call everytime after a one ring.
also is it still not possible to block text messages from certain spam numbers?
View 1 Replies
View Related
Jun 6, 2013
Has successfully established a bridge mode VPN connection (using TAP) in any version of Jellybean, stock or custom?
It seems that every vpn app in the play store suggests that this can't be done in JB. I'd really like to upgrade to JB, but I really don't feel like reconfiguring my whole VPN setup, just to log on to my home server every once in awhile.
View 1 Replies
View Related
Dec 23, 2012
I would like to root my RAZR M (U.S.) > Verizon network > Jelly Bean 4.1.1 (updated by store).
View 1 Replies
View Related
Nov 28, 2012
I have application that I have been developing for over a year and half now. I used the app to teach myself Android programming. When I started the development Gingerbread was the main sdk and that is what I targeted. Well now ICS and Jellybean are out and I was looking at migrating my app from Gingerbread to the newer sdks.
How to most efficiently go about this process. I would like to keep everything in the same files if possible and not have to start from scratch.
View 2 Replies
View Related
Jul 16, 2012
I'm currently porting Jelly Bean to my device and I have hit a logcat error which I can't figure out. It currently gets stuck at the boot animation: [URL] ......
View 1 Replies
View Related
