General :: Porting Jelly Bean To Device
Jul 16, 2012I'm currently porting Jelly Bean to my device and I have hit a logcat error which I can't figure out. It currently gets stuck at the boot animation: [URL] ......
View 1 RepliesI'm currently porting Jelly Bean to my device and I have hit a logcat error which I can't figure out. It currently gets stuck at the boot animation: [URL] ......
View 1 RepliesMy bro has a note running jb. He has a secgallery app which I cant install on my xperia u wid ics
I always get an error "App not installed".
I have decompiled the app... But m nt a modder so I dun knw what changes to make in androidmanifest or some other folder to run it..
I have a Coolpad 8720L with its own interface built upon 4.3 Jelly Bean. It's not very good, and I'd like to install stock Android instead. How do I do this?
I heard that I have to root the device, and then find a ROM for stock Jelly Bean to load onto the device?
I have customer, who has crashing app on his phone. Previously we use to use aLogcat application on the phone. So user was just instructed to extract log from this application and send logfile to us. But unfortunately aLogcat is not working since Jelly Bean update.
How can I get logcat info from his device without asking him to install entire Android SDK? Any simple software on the phone or on the Windows computer can do this trick?
1.how to port a jb rom To a ics mtk 6577 based device ?
View 2 Replies View RelatedI have a MT6577 Android ICS device. I want to update it to Jelly Bean. How would I do that.
View 1 Replies View RelatedYesterday I upgraded by Galaxy S3 to Android 4.3 (ATT network) and now I keep getting the same 10 documents listed under Notifications as "Download Compete". I click clear and the notification keeps coming back (about an hour later). When I try to open the document I get a message saying the documents aren't on the device. Which makes sense because these are items I downloaded a year or so ago. how to stop it besides going back to the old version?
View 4 Replies View RelatedI'm getting this error when trying to update my system on my Samsung Galaxy Grand GT-I9082.
My current version is 4.1.2 and I want to update to 4.2.2, but I keep getting that error. I tried wiping the cache. My device has never been rooted. I bought my phone new and packaged and I did not root it. The status says that it's custom and I can't figure out how to solve this. I've read around that removing the SD card and updating works, but I don't have a SD card in my phone.I go to the Settings -> About Device -> Software Update -> Update.
My Samsung s3 phone says usb device connected not recognized when i connect to any PC even though other phones similar to mine does connect. i have tried many tricks from different sources but it still doesn't work. when i connect it in the custom mode by starting the phone with pressing Home/power and volume buttons it is recognized and says device ready to use but the moment i swict the phone in normal mode it goes back to not recognized.
View 1 Replies View RelatedMost of my Android contacts are listed as "device" under the "connection" heading. About 10% of my contacts are listed as either "google" or as "google" and "device". The contacts that are have Google under the Connection heading auto-sync to Google+, the remaining 90% of my contacts don't sync.
Is there a way to edit/change the Connection type to add Google to all my contacts?
I have rooted my device and I was downloading a app and it was taking long to complete so I force stopped some app in the app manager thing (I think it was about downloading) and now after that any google things don't work. Like google play or youtube. How do I get it to work again? Plus I have tried the clear data thing on the google fraimwork thing.
View 1 Replies View RelatedI have a European GNex (4.3) that is not tied to a carrier. I also have a Nexus 10 on 4.3. On both devices, I have activated "Allow remote lock and factory reset" in the Google Settings app.However, while I have all functionalities shown as activated on the ADM web interface for the Nexus 10, my GNex is "stuck" with only the "Ring" function active. I have unchecked and rechecked "Allow remote lock and factory reset" and refreshed the web page, deleted the data from the Google Play Services app and rebooted, tried combinations of all of these, all to no avail. The ADM web interface continues to show only the "Ring" function for my GNex, with "Lock" and "Erase" greyed out.
View 1 Replies View RelatedI have several apps for DSLR tethering on my nexus 7 (2013). Previously, I was given a choise of which app I wanted to run when connecting my camera, but now one app automatically loads. Iam not given a choise anymore. how can I change this back?
View 2 Replies View RelatedI can't put any music on it. My computer will either stay frozen on copying the first song to copy, or it will tell me that the Nexus disconnected. I'm using the original cable that came with it, and I tried another one already.
View 1 Replies View RelatedI'm looking for a tutorial to Root and then revert back to JellyBean from KitKat on a Nexus 7 2013 2nd Gen, non carrier, WiFi only, or Whatever is required to switch back to JB from KK..
View 1 Replies View RelatedI copied the whole WhatsApp folder from File moved it to a new Android device. I replaced the whole WhatsApp folder on the new device. I cannot retrieve the chat history ....
View 2 Replies View RelatedI'm having some problems with the porting of a rom, my phone is a clone of the phone from which i'm taking the rom (My phone is a NGM Legend 2, which is also a clone of Gionee GN868, and the original is Blu Vivo 4.3) the only thing which is really different are the mounting positions of the internal memory.
In Blu Vivo 4.3 the system partition is mounted on /dev/block/mmcblk0p3 and the data partition is on /dev/block/mmcblk0p5 while in the mine they are mounted on /dev/block/mmcblk0p4 and /dev/block/mmcblk0p6.
I changed them in the updater-script so i'm able to install the rom, but i had to replace the boot.img with the one from my rom because the phone wasn't booting up, but i can't install any app from google play store (error 110) or any apk ("app not installed" error).
Its just something Ive wondered for a while since Android has a lot of similarities across different devices
View 2 Replies View RelatedI just purchased my first ever cell phone ( Google LG Nexus 4 16gb ) . I have never used one before , just never had the need for one . How to use Android Jelly Bean 4.3 and also how to use this phone .
View 5 Replies View RelatedBest way I could describe it. On ICS the dialer would allow me to type a number and come back to it later, now when I multi-task the number disappears. I am running 4.1.2 on a HTC Desire 300, and the dialer is stock to the best of my knowledge.
View 4 Replies View RelatedThe jellybean box itself turns on and the home screen loads up. I select the page where all the apps are...select xbmc app...sometimes it flicks back to main apps page other times the screen turns black/blank. I can't get further than this page....my box has worked perfectly for the past 3 months since purchasing. I can't get into the settings page as I can't get past the blank .
View 1 Replies View RelatedAwaiting delivery of my Nexus 4 - 16GB, is there software to back up the phone data to my PC?
View 3 Replies View RelatedAfter I flashed a couple roms I couldn't boot jelly bean anymore and I noticed the error in recovery: E: Cant Mount /efs, when installing. But I could still boot ICS but not jellybean. I still had my IMEI and could make calls but could not boot jelly bean because it couldn't mount.
Sometimes when installing a rom something goes wrong and it changes the partition type of /efs making it unable to be mounted. The partition is usually from ext4 to swap.Most likely this will work on your phone but if it doesn't and your phone stops working I am not responsible.
If your like me and you couldn't get jelly bean to work then flash your device back to ics and it should boot. Once your booted inside of ics we can start the process.
Pre-Setup:
1. Be rooted and have a custom recovery installed.
2. Be on Ics and it boots.
3. Your need to have a Jelly Bean rom like Cyanogenmod on your sdcard.
4. Have adb installed on your pc and usb debugging on in your phone/tab.
Now that that's done its time to start.
Part One:
1. Boot into recovery.
2. We need to find the efs block location.
3. Go to mounts and select efs
4. It should say unable to mount
5. Go to advance and make a recovery.log
6. Put that file on your computer and open it.
7. Look through the file and you should fine something like this around the beginning of the file:
E:Unable to mount '/efs'..Actual block device: '/dev/block/mmcblk0p3', current file system: 'swap'..My location is /dev/block/mmcblk0p3 But yours could be different! Most likely the difference will be instead of it ending with a 3 it will be a different number. I will be saying /dev/block/mmcblk0p3 if yours is different just change it to your location.
*WARNING* Sometimes when you copy paste into adb it will auto run the command without you pressing enter. If your location is different then mine and you copy past and it auto runs it could be BAD so to be careful if you want to copy past. Copy the command paste it into Google make the change and copy that and paste into adb
Part Two:
1. When your inside recovery connect your phone to your computer and get into a adb shell. (Sometimes it will take awhile for adb to recognize your device so be patient.)
2. Once you have adb access its time to start entering the commands.(Again my location may be different the yours! Most likely the difference will be instead of it ending with a 3 it will be a different number.
Part Three Inside ADB:
1. su
2. dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
DONT REBOOT PHONE
Part Four On Your Phone:
1. Now /efs is mounted don't unmount it
2. Do a factory reset
3. Install your Jelly Bean rom
4. It should install without any errors
5. Boot your phone
6. If everything went well it should boot.
7. After it boots your signal notification most likely will be gray and internet or calls may not work
8. To fix just install gapps and it will be fixed
There you have it if everything went correctly your efs should be working good and you should be able to go back and do your normal rom flashing.
If jelly bean boots but you don't have phone do this:
1. Go back into recovery and get adb access.
2. su
3. mke2fs /dev/block/mmcblk0p3
4. mkdir /efs
5. mount -t ext4 /dev/block/mmcblk0p3 /efs
6. dd if=/sdcard/efs.img of=/dev/block/mmcblk0p3 bs=4096
I just recently bought the Samsung Galaxy S II on the Straight Talk network. The phone comes stock with the Android Gingerbread 2.3.6 OS and I'd like to upgrade to the latest Android Jelly Bean 4.2 OS.
Here are the phone facts:
Network: Straight-Talk
Model Number: SGH-S959G
Android Version: 2.3.6
Kernal Version: 2.6.35.7
Build Number: GINGERBREAD.UDLG1
I came across a thread to get Jellybean animations on ICS, I did a search but I cannot find it. HTC Vision
View 1 Replies View RelatedI've got an replacement of my karbonn A2+ via company.
I want its backup and flash file..
Is it possible to upgrade HTC One V to Jellybean 4.2?I have tried running software update located in settings-->about phone but it says that there are no updates available.So is it possible to get jellybean 4.2 on my phone?Are there any risks involved?Can updating to jellybean harm my phone?btw my phone is rooted. What cyanogen mod is?Can i first install jellybean 4.2 and then install cyanogen mod?
View 1 Replies View Relatedim trying to port crt off and on ..on deodex'd stock rom..i had try'd these methods but it didnt work'd out on jelly bean..link for porting crt off on stock jelly bean rom for GT-i9082
i had try'd these methods but no use..
[URL]
I've attempted to build two different sources, one modified ICS AOSP and another from straight up JB AOSP. Both err on me.
JB spits out the following:
Quote:
make: *** No rule to make target `out/target/product/devicetest/obj/STATIC_LIBRARIES/lib_driver_cmd_wext_intermediates/export_includes', needed by `out/target/product/devicetest/obj/EXECUTABLES/wpa_supplicant_intermediates/import_includes'. Stop.
make: *** Waiting for unfinished jobs....
target thumb C: wpa_cli <= external/wpa_supplicant_8/wpa_supplicant/src/utils/edit.c
I'd prefer to get JB working, but would be satisfied with ICS for now.
Running RemICS-JB on my infuse, hotmail won't connect. Tried using m.hotmail.com and debug-m.hotmail.com and neither worked.
View 2 Replies View Related