General :: Flashing ROM With CWM On Galaxy Ace?
Oct 29, 2012
I always have a problem when I want to flash a rom using cwm, yesterday, I tried to flash Jellaxy AOKP rom on my galaxy ace, but I had an error message saying: "can't flash rom.zip (bad)". Thought that the zip file was corrupted, so I tried to flash another rom: beats with smooth sense 6, the same problem occured. (Tried deleting clockworkmod floder from sd card).
My galaxy Ace is running under CM 7.2 with cwm recovery 5.0.2.6 . baseband:S5830XWKPA. kernel :the one that comes with cm.
View 3 Replies
Feb 2, 2012
I'm interested in this so-called ICS ROM [URL] .... which people say that it's just a theme and wanna install it on my Galaxy Ace.
In the thread he says : " -Do a 3x wipe dalvik cache - Flash normally through CWM "
View 1 Replies
View Related
Oct 1, 2011
II would like to flash my Samsung Galaxy 3 (right now Froyo) to use it with Kyrillos' ROM v7.5 under Mac OS Lion.
The only program capable of that I found (in this forum) is the Wineskin'ed version of Odin (v3 1.85). But that does not detect my phone in download mode and also has other buttons than the version Kyrillos speaks of in his manual (there you are asked to "select ops", while the Mac version of Odin only lets you select "PIT"s or chose a .tar-file for one of "BOOTLOADER", "PDA", "PHONE" and so on).
So, three questions:
1. How can I get that version of Odin to recognize my phone?
2. What do I have to select in that version of Odin after solving question 1?
3. Otherwise, are there alternatives to use (except a Windows computer or a virtual machine running Windows)?
View 1 Replies
View Related
Sep 23, 2013
I'm flashing my device with odin boy after successful flashing my device getting reboot itself... I fed to flash again & again. start up normally. Even i'm unable to flash through cwm recovery bcoz it does not shows the external memory card so that i can flash rom from ext card..img recovery which detects the ext card.
View 1 Replies
View Related
Nov 2, 2012
I need to get my phone is a working state. Can't boot into recovery, I can boot into Odin. How to restore my phone to a working state? It's a GT-i5510M, carrier is Bell.
View 4 Replies
View Related
Oct 9, 2012
On my Samsung galaxy s3 I have 2 flashing arrows under my wifi bar.. I went to Samsungs chat and the first time I was told that it was because I was transfering data but I wasn't. She then told me to do a soft reset so it did and it still continued. Then I went back on because the first person told me it would eat up my data if I didn't break the transfer. The second lady said that all that means is that it's showing that it's connected to my router and is normal and won't use my data..
View 5 Replies
View Related
Jan 21, 2013
so i just find a new way to reboot to stock recovery on samsung galaxy ace plus GT-S7500 without flashing another custom recoveru like cwm or something like that
many people say that we cant access the stock recovery on galaxy ace plus because it have some bugs or something else.. now i found the way how to do that
just follow the simple guide how to do that :
1. reboot it using volume + and volume - ~> home button ~> power button
2. click and hold both volume button then the home button then the power button..
3. if the phone gets turned on so u need to keep hold that button until the recovery showed up (when it showed up and its get turned off again so u need to hold all the button again until it get rebooted to recovery)
4.if u get rebooted all time its not a big problem again .. all u need is just hold all that button until the phone gets turned on and release the power off button and hold it again until u boot it on recovery mode.. and done u booted up on recovery mode (im not responsible if ur phone gets bootloop or something else)
View 3 Replies
View Related
Apr 11, 2013
My cute galaxy ace was dead after flashing the wrong firmware by accedent (galaxy 551 firmware) now i'm not able to enter the download mode when i try to boot it on it just turns on the two virtual buttons, any way to flash to flash without entering to download mode or using another program ??
View 2 Replies
View Related
Nov 4, 2013
So about a month ago I flashed the Google Play Edition ROM on my Verizon S4 and when I did I had no LTE. So I fiddled around with the radio and mobile setting for a while but every time I would change it to either LTE/CDMA/GSM or LTE/CDMA it would change back to GSM/CDMA. Eventually somehow I got it to connect to LTE then never touched it. But one day I had no service and couldn't figure out why until I checked the radio settings again and saw that it was connected to GSM/CDMA. I changed it back but to LTE/CDMA but when I exit out of the radio setting it just resets back to GSM/CDMA.
View 1 Replies
View Related
Mar 2, 2014
I have Samsung Galaxy S GT-S7562 After rooting and flashing KyleOpen custom rom, the mobile worked just fine but there's no network while calling or receiving a call.. I went to maintenance service and they told me that it needs New main motherboard or something
View 9 Replies
View Related
Jan 17, 2013
I have lately flashed CM10.1 nightly on my GT-I9300 and am experiencing high battery drain (twice-three times what I had before), and get over 1%/h over the night when all is turned off.I have read a lot about fast battery drain reasons, but couldn't find an answer to mine.I've downloaded better battery stats to check for any abnormal activity, but it seems normal to me (dump attached).
Note, I've installed the cm10.1 straight from my internal memory and I do not have an external SD card.Also, from the dump file it seems that the phone was mostly in deep sleep mode and I see no reason then why it wouldn't just drain at 1-2% per 8h.
View 4 Replies
View Related
Dec 17, 2012
everytime i installed a custom ROM preferrably CM7 Apocalypse, i always lost my data connection, i dont know why this thing happen, then last time i installed CM7 Apocalypse again (changelog dated 9/7/2012 by itasoulas) i still lost Data Connection though i follow the instructions given, plus i cant receive a message even though i installed a messaging app. im tired im reflashing my phone back to Stock Rom over and over again .
View 2 Replies
View Related
Mar 26, 2013
I flashed with "CWM-touch_i9082_chotu.tar.zip" and the the rooting as per this [URL] and it was successful.
But I installed font installer and gave access via superuser and after reboot, it dint turned on ( stuck on bootloader "Samsung")..
So I flashed SGG with stock rom via Odin and the phone got on, and again tried to flash "CWM-touch_i9082_chotu.tar.zip" but this time , i dint got the CWM. I am getting android system recovery instead on CWM... I cant root again!!
I tried flashing "CWM-touch_i9082_chotu.tar.zip" 3 time but only bin counter is rising.. i am getting android system recovery 3 <e> only...
View 1 Replies
View Related
Jun 12, 2014
How to root samsung galaxy star 3 duos gt s5282 without flashing roms
View 1 Replies
View Related
Mar 29, 2013
After attempting to root my device with [URL] .... My device boots up, but touchscreen doe not work. What can i do?
View 1 Replies
View Related
Oct 14, 2012
I have a Galaxy Note GT-N7000, running rooted 4.0.4 ICS with Franco Kernel.
Now I wanna flash CM10 on my my device and was wondering, if I create a Nandroid backup before flashing, can I restore my apps and data after I flash it? I mean, am l gonna still be able to retain previous messages, whatsapp conversations, game scores etc...
View 1 Replies
View Related
Apr 9, 2013
I have installed many applications on my Galaxy Grand duos, with binding the applications data to External SD card (32gb), what will be the best practice to backup all the application and the data before installing another firmware? I don't have enough space on internal sdcard to unbind the application data.
View 5 Replies
View Related
Jan 9, 2013
My Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
View 4 Replies
View Related
Nov 18, 2010
I got my galaxy s today... quickly tried some stuff, and i pretty much like it so far. But i do have some questions about unrooting and flashing.
1. Its currently branded and its eclair 2.1, should i flash an official generic froyo, or some custom rom like doc froyo 7.6.2?
2. If i were to root my phone, would i need to unroot it before flashing new rom? If so how would i do it (is factory reset enough or not)?
3. Which lagfix should i use after updating to froyo, that would be pretty easy to use and not cause data corruption or something like that?
View 4 Replies
View Related
May 19, 2010
what would happen if i flashed the galaxy kernel on my behold 2? or any other kernel for that matter... i am sort of new to this but i know alot of things too. so is this possible?
View 3 Replies
View Related
Jun 9, 2010
I have got a few questions about my Galaxy. More infomation about my version below.
Firmware version: 1.5
Model number: Galaxy
Build number: 76XXCSDCBALUM6375
Kernel Version: 2.6.27 hyunchul0221.jung@SE-S402 #1
Base band version: I7500DFII3
Quote:
View 1 Replies
View Related
Feb 15, 2014
I have a galaxy S3 and my battery has been draining very quickly as of late. Not sure if it's due to the battery or the phone reading the battery wrong. I read that people have had some luck by deleting the phone's battery info by flashing a ROM but I don't really know much about that and don't want to harm my phone.
View 10 Replies
View Related
Nov 30, 2010
I have an i9000M (Bell) Galaxy S that is unlocked. I have had different versions of Froyo on the phone in the last couple of months, Currently, I have JPO and it is working fine.
My first question is,
Is there a generic (Non Bell, Orange, Att, etc.) version of Android that works on any android phone? Also, what about a version that works on any brand of phone, sort of like WIndows on a PC. I know there are a sh*t load of different phones out there, but I was wondering if a generic version would work.
Question #2,
Can I flash a European version of Froyo onto my Canadian phone?
View 2 Replies
View Related
Nov 8, 2010
I want to flash my phone back to android 2.1. My phone is in download mode but odin is not picking it up?
View 3 Replies
View Related
Apr 23, 2010
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question.
Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.
View 13 Replies
View Related
Aug 20, 2010
I'm an Android developer who is working with the upcoming Samsung P1000 tablet. I have to say that I haven't worked with Samsung Android devices so far. This is a developer/Engineer sample but I have real rough time to get a contact person at Samsung to help me solve this in a fast way, so I'm asking to the community :-)
The thing is I was trying my application while developing and every certain time I found the phone memory almost full (I think the tablet is saving all of its logs in a very verbose way in /data/logs where I haven't permission to access, and also it hasn't a micro sd inserted). The first time this happened I just did a factory reset from the OS itself.
The second time has been today and the phone was so full of data it didn't start at all. I was viewing the logs with adb logcat and Android was unable to start. He was trying and trying again (like in a loop) but only the Android logo was shown. I found the lack of memory to be the reason for this:
W/BatteryStats( 2949): Error writing battery statistics
W/BatteryStats( 2949): java.io.IOException: No space left on device
W/BatteryStats( 2949): at org.apache.harmony.luni.platform.OSFileSystem.writ eImpl(Native Method)
W/BatteryStats( 2949): at org.apache.harmony.luni.platform.OSFileSystem.writ e(OSFileSystem.java:129)
W/BatteryStats( 2949): at java.io.FileOutputStream.write(FileOutputStream.ja va:297)
W/BatteryStats( 2949): at java.io.FileOutputStream.write(FileOutputStream.ja va:253)
W/BatteryStats( 2949): at com.android.internal.os.BatteryStatsImpl.writeLock ed(BatteryStatsImpl.java:3080)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService.<init >(ActivityManagerService.java:1430)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService.<init >(ActivityManagerService.java:129)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService$AThre ad.run(ActivityManagerService.java:1338)
The tablet can't write anything on the system, so it fails at booting and tries again, and again...
I did a factory reset via ADB with adb reboot recovery. Then the phone shows the recovery menu but no matter what option I choose (reboot, factory reset, update.zip or wipe cache) because the device doesn't seem to be doing anything but keeping the screen in black. If I turn off the device then it goes again to the recovery menu.
So I was stuck with the Android logo screen, and now I'm stuck in the recovery screen.
I thought flashing the phone would help so I turn it on in upload mode pressing the 2 volume buttons together (Power reset or unknown upload mode it says). This way the phone is recognized by Odin Multidownloader. I just grab a leaked firmware for this upcoming tablet from this Web The rar file only contains a SS_DL.dll and a OXA.tar. The tar contains some files: modem.bin, zImage, param.lfs, cache.rfs, dbdata.rfs and factory.rfs.
I've never used Odin nor flashed an android samsung phone so probably I'm doing something wrong. I tried to load the tar as the phone image it gives me an error, I also tried to load it as a single package but also failed.
So at this point I'd be most than grateful if anyone can share his ideas on this almost bricked tablet :-P
Edit: That "upload mode" was a fault of me, probably volume down was released while booting. I have the device in download mode but Odin keep me saying check image files, Any idea??
View 3 Replies
View Related
Apr 28, 2013
Rom Manager tells me "Goophone i5 does not have an officially supported ClockworkMod Recovery yet. Have you installed a ClockWorkMod recovery manually?"... If I say Yes it asks me to confirm Version 2.x or 3.x+. I don't know if a CWM was installed manually. What should I do?
I can't see a recovery file on the SD card.
View 1 Replies
View Related
Oct 12, 2013
I was wondering if i can flash kyapat10mod3 using sgs kernel flasher on my SC-02B (SC02BOMLL1)? is it possible? I don't want to brick my phone.
View 1 Replies
View Related
Jun 26, 2013
i have a ZTE (kis lite v790)..I've found ROMs for it but they are from other providers. the signed update.zip checks if your phone is from the right provider and exits if it doesn't match. All the rooting attempts on my phone have failed and if i edit the update.zipMETA-INFcomgoogleandroidupdater-script it fails the signature check.how on earth am i supposed to update my phone?
View 1 Replies
View Related
Mar 25, 2014
I would like to know the steps & software on how to flash a ROM (Like a Garmin) into my current GPS Deivces?
View 1 Replies
View Related
