I have Samsung Galaxy S GT-S7562 After rooting and flashing KyleOpen custom rom, the mobile worked just fine but there's no network while calling or receiving a call.. I went to maintenance service and they told me that it needs New main motherboard or something
View 9 Replies
Always have circle instead of sim1 or sim2 coverage and triangle indicating Network Registration Error and I try the following
1-restart or enable Flight mode then disable
2-replacing the two Sims cards with another from another network
3-trying to register manually and failed to register
4-replacing the software with another
I did all these steps separately or together.
Every app i have been tried to call recording can record my voice only
record my calls (2way recording) with Samsung Galaxy S Duos S7562
I have a galaxy S duos S7562 mobile and It has gone into bootloop.
Whenever I start it, It shows the samsung logo and restarts.
I am unable to take it either in recovery or in Download mode. I tried 3 button combo and USB jig but nothing work. How can I take it in Download mode..
This is a request to all the super awesome devs here on xda. make/port a custom JELLYBEAN rom(preferably with stock android or CM UI) for Samsung Galaxy S Duos(GT-S7562) ?
View 2 Replies View RelatedI bought a Galaxy s Duos S7562 and i installed rom cosmic V1.It was working .But after that, i find out about pmp ultra light rom.I tried to install it but it remains stuck at boot logo, I mean it is restarting at infinite.I tried a lot of basebands, kernels but the same thing happened.Now i tried to install Cosmic rom V2 and before that, I installed Fat.bin with ODin 3.04 but the problem persists.I used the baseband :Bmj1 ; Amd; Bmd but with no ressult
View 2 Replies View Relatedcan i flash galaxy s7562L duos with firmware of galaxy s7562 duos ?
View 2 Replies View RelatedII would like to flash my Samsung Galaxy 3 (right now Froyo) to use it with Kyrillos' ROM v7.5 under Mac OS Lion.
The only program capable of that I found (in this forum) is the Wineskin'ed version of Odin (v3 1.85). But that does not detect my phone in download mode and also has other buttons than the version Kyrillos speaks of in his manual (there you are asked to "select ops", while the Mac version of Odin only lets you select "PIT"s or chose a .tar-file for one of "BOOTLOADER", "PDA", "PHONE" and so on).
So, three questions:
1. How can I get that version of Odin to recognize my phone?
2. What do I have to select in that version of Odin after solving question 1?
3. Otherwise, are there alternatives to use (except a Windows computer or a virtual machine running Windows)?
On my Samsung galaxy s3 I have 2 flashing arrows under my wifi bar.. I went to Samsungs chat and the first time I was told that it was because I was transfering data but I wasn't. She then told me to do a soft reset so it did and it still continued. Then I went back on because the first person told me it would eat up my data if I didn't break the transfer. The second lady said that all that means is that it's showing that it's connected to my router and is normal and won't use my data..
View 5 Replies View Relatedeverytime i installed a custom ROM preferrably CM7 Apocalypse, i always lost my data connection, i dont know why this thing happen, then last time i installed CM7 Apocalypse again (changelog dated 9/7/2012 by itasoulas) i still lost Data Connection though i follow the instructions given, plus i cant receive a message even though i installed a messaging app. im tired im reflashing my phone back to Stock Rom over and over again .
View 2 Replies View RelatedI flashed with "CWM-touch_i9082_chotu.tar.zip" and the the rooting as per this [URL] and it was successful.
But I installed font installer and gave access via superuser and after reboot, it dint turned on ( stuck on bootloader "Samsung")..
So I flashed SGG with stock rom via Odin and the phone got on, and again tried to flash "CWM-touch_i9082_chotu.tar.zip" but this time , i dint got the CWM. I am getting android system recovery instead on CWM... I cant root again!!
I tried flashing "CWM-touch_i9082_chotu.tar.zip" 3 time but only bin counter is rising.. i am getting android system recovery 3 <e> only...
After attempting to root my device with [URL] .... My device boots up, but touchscreen doe not work. What can i do?
View 1 Replies View RelatedMy Samsung Galaxy S Duos GT-S7562 is having many problems. First of all it is taking a lot more time to charge the battery and it gets very Hot while charging.
Wifi is also Disabled. I am not able to turn the Wifi on. And Phone is getting switched off Automatically. It won't even turn on until and unless I remove battery and insert it back. Tried to do Factory reset but no dice.
I have a tablet Samsung GT P6210 Galaxy Tab (Tab Plus 7'') with honeycomb Android OS 3.2. It's root, but does not have access to Ad-hoc network.
View 1 Replies View RelatedMy Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
i bought samsung galxy s4 from 7 days and it workng good until once i was making a call and it said ( not registerd on network ) i opened the flight mode and turned it off and restored the apn settings too default and reseted the phone 3 times an 2 ith hard reset !
View 2 Replies View RelatedToday i founded a phone ( lucky ) BUT Phone not found any network its look like phone is turned on with no sim, but sim is entered and regonized, beacuse when i slide down bar there can see Network provider.
I rooted phone and flashed CM 7.2 RC 3+, but still no network.
everything work exept
calls ( i can make emergency calls )
sms
2g/3g
Spec
Samsung Galaxy 5 ( Gt-I5500)
custom room CM 7.2 RC 3+
I'm having an error with an app called network spoofer
Whenever I use this I get this in the output: chroot can't execute 'spoof': No such file or directory ?
My device
Samsung Galaxy Tablet 3 10"
My mobile samsung galaxy s advance GT-I9070 mobile network not detecting properly....
When i connected USB data cable mobile with pc...my mobile network working fine....
suppose i try to unplug my mobile USB data cable...my mobile network is gone....
I got error "Insert sim card to access network service".....
Model Number : GT-I9070
Android Version: 2.3.6
Baseband Version: I9070DXLK2
Kernal Version : 2.6.35.7-1211839
dpi@DELL176 #2
SMP PREEMPT Fri Nov 16 14:21:26 KST 2012
Build Number: GINGERBREAD.DXLK2
I was searching online to see how to make a shortcut to toggle the 3G connection on and off without having to sift through multiple menus. I came across the method of having a long press on the power lock button to pull up the menu but mine does not show the network data on/off option and never has. It only shows
* Silent mode
* Airplane mode
* Power off
* Restart
Nothing else. Is there a way I can make a shortcut or some other way to ADD the network data on/off on this pull up menu from the power lock button? By the way why would my phone not have this option from the start when the phone came with Gingerbread and was updated to ICS 4.0.4? I have Sprint so they call this the Epic 4G Touch, so not sure if it was Sprint that buggered this from the other SGS2s that have this feature or not.
I have an xperia X8 with some naa kernel and xperiadroidx 6.1.The thing is that with this custom kernel and ROM when i put a SIM from another network carrier, the question asking for the SIM-unlock code input is not showing up. (this appeared before when phone was in stock state).Is it possible to do it without re-flashing to stock?
...or i have to put back the phone to stock? What is the easiest/safest/best way to do this? using the restore option in "PC companion" SE app? Is it only needed to put the stock kernel and ROM, or Do i also need to re-lock the bootloader?
I don't need the whole explanation, just a little guidance, just a few tips to know what to do, then i can google/search myself for the specifics on how to actually do it.
I got my galaxy s today... quickly tried some stuff, and i pretty much like it so far. But i do have some questions about unrooting and flashing.
1. Its currently branded and its eclair 2.1, should i flash an official generic froyo, or some custom rom like doc froyo 7.6.2?
2. If i were to root my phone, would i need to unroot it before flashing new rom? If so how would i do it (is factory reset enough or not)?
3. Which lagfix should i use after updating to froyo, that would be pretty easy to use and not cause data corruption or something like that?
I'm an Android developer who is working with the upcoming Samsung P1000 tablet. I have to say that I haven't worked with Samsung Android devices so far. This is a developer/Engineer sample but I have real rough time to get a contact person at Samsung to help me solve this in a fast way, so I'm asking to the community :-)
The thing is I was trying my application while developing and every certain time I found the phone memory almost full (I think the tablet is saving all of its logs in a very verbose way in /data/logs where I haven't permission to access, and also it hasn't a micro sd inserted). The first time this happened I just did a factory reset from the OS itself.
The second time has been today and the phone was so full of data it didn't start at all. I was viewing the logs with adb logcat and Android was unable to start. He was trying and trying again (like in a loop) but only the Android logo was shown. I found the lack of memory to be the reason for this:
W/BatteryStats( 2949): Error writing battery statistics
W/BatteryStats( 2949): java.io.IOException: No space left on device
W/BatteryStats( 2949): at org.apache.harmony.luni.platform.OSFileSystem.writ eImpl(Native Method)
W/BatteryStats( 2949): at org.apache.harmony.luni.platform.OSFileSystem.writ e(OSFileSystem.java:129)
W/BatteryStats( 2949): at java.io.FileOutputStream.write(FileOutputStream.ja va:297)
W/BatteryStats( 2949): at java.io.FileOutputStream.write(FileOutputStream.ja va:253)
W/BatteryStats( 2949): at com.android.internal.os.BatteryStatsImpl.writeLock ed(BatteryStatsImpl.java:3080)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService.<init >(ActivityManagerService.java:1430)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService.<init >(ActivityManagerService.java:129)
W/BatteryStats( 2949): at com.android.server.am.ActivityManagerService$AThre ad.run(ActivityManagerService.java:1338)
The tablet can't write anything on the system, so it fails at booting and tries again, and again...
I did a factory reset via ADB with adb reboot recovery. Then the phone shows the recovery menu but no matter what option I choose (reboot, factory reset, update.zip or wipe cache) because the device doesn't seem to be doing anything but keeping the screen in black. If I turn off the device then it goes again to the recovery menu.
So I was stuck with the Android logo screen, and now I'm stuck in the recovery screen.
I thought flashing the phone would help so I turn it on in upload mode pressing the 2 volume buttons together (Power reset or unknown upload mode it says). This way the phone is recognized by Odin Multidownloader. I just grab a leaked firmware for this upcoming tablet from this Web The rar file only contains a SS_DL.dll and a OXA.tar. The tar contains some files: modem.bin, zImage, param.lfs, cache.rfs, dbdata.rfs and factory.rfs.
I've never used Odin nor flashed an android samsung phone so probably I'm doing something wrong. I tried to load the tar as the phone image it gives me an error, I also tried to load it as a single package but also failed.
So at this point I'd be most than grateful if anyone can share his ideas on this almost bricked tablet :-P
Edit: That "upload mode" was a fault of me, probably volume down was released while booting. I have the device in download mode but Odin keep me saying check image files, Any idea??
what would happen if i flashed the galaxy kernel on my behold 2? or any other kernel for that matter... i am sort of new to this but i know alot of things too. so is this possible?
View 3 Replies View RelatedI have got a few questions about my Galaxy. More infomation about my version below.
Firmware version: 1.5
Model number: Galaxy
Build number: 76XXCSDCBALUM6375
Kernel Version: 2.6.27 hyunchul0221.jung@SE-S402 #1
Base band version: I7500DFII3
Quote:
I have an i9000M (Bell) Galaxy S that is unlocked. I have had different versions of Froyo on the phone in the last couple of months, Currently, I have JPO and it is working fine.
My first question is,
Is there a generic (Non Bell, Orange, Att, etc.) version of Android that works on any android phone? Also, what about a version that works on any brand of phone, sort of like WIndows on a PC. I know there are a sh*t load of different phones out there, but I was wondering if a generic version would work.
Question #2,
Can I flash a European version of Froyo onto my Canadian phone?
I want to flash my phone back to android 2.1. My phone is in download mode but odin is not picking it up?
View 3 Replies View Related I'm interested in this so-called ICS ROM [URL] .... which people say that it's just a theme and wanna install it on my Galaxy Ace.
In the thread he says : " -Do a 3x wipe dalvik cache - Flash normally through CWM "
I always have a problem when I want to flash a rom using cwm, yesterday, I tried to flash Jellaxy AOKP rom on my galaxy ace, but I had an error message saying: "can't flash rom.zip (bad)". Thought that the zip file was corrupted, so I tried to flash another rom: beats with smooth sense 6, the same problem occured. (Tried deleting clockworkmod floder from sd card).
My galaxy Ace is running under CM 7.2 with cwm recovery 5.0.2.6 . baseband:S5830XWKPA. kernel :the one that comes with cm.
I bought my Galaxy recently. It happened I believe while using a couple of apps I downloaded called :
TOGGLE DATA and APNdroid. I wanted to use the function that would allow me to have an icon to turn on and off my 3G network. But something happened, and now I cant seem to know where to turn on 3G internet. WiFi still works fine but I cant seem to find where to get 3G activated? I have since deleted those 2 apps for the time being until I get my connection back.