I am trying to login to the The Sun Mobile app however when i click on the password field the app restarts itself over and over.
I have cleared the data and cache and have done a factory reset but still doesnt work. Is there another way to login to the app?
I am using Android version 2.3.6
Kernel version 2.6.35.7-perf+
Baseband version a4-03.32.01
And my phone is the Acer liquid metal
View 2 Replies
I can not get an EditText view to transform a password.
Here's the creation of my view:
CODE:.......
What I see on the screen is what I type. The text is not transformed.
Any app that can password lock mobile data?
Basically my brother's mates racked up a $100 data bill using youtube so I would like to disable mobile data and lock it with a password or similar, I would just change the APN but I'm sure they could figure that one out.
After searching the groups and posts, i could not find a suitable answer to my question - On a Android mobile phone, where can i find the Field Test Mode/Application so that i can see cellular network information? On other mobile phone platforms, you can enter a number key sequence and a Field test mode is launched providing cellular network information e.g cell ID, signal strength. Does anyone have any suggestions on how i can acquire/activate Field Test Mode please?
View 2 Replies View RelatedI've been doing some usability testing on a website I'm developing, using an Android phone and an iPod touch. In both cases, when entering a numeric field (time, distance in metres, etc) I have to take a manual step to change the keyboard layout to show digits. As the app will only accept numeric values in the text box, I'd like to save the user the inconvenience and tell the device "switch to the number pad for this input".
View 1 Replies View RelatedI'm building a Webapp that uses OpenId to authenticate users, like Stackoverlfow does. There will be a mobile App too, e.g. Android or iPhone. These Apps have to authenticate or login somehow, to access data and update stuff that belongs to the user. Since there is no username and password one could provide to authenticate the mobile device, I wonder how to achieve this.Two ways came into my mind:Generate some key on the server that must be entered on the device. This key will be send as auth-key when the mobile device sends or requests data and the user can be linked that way. When using this Option, the key should be transported somehow to the user, so he doesn't have to type it in. Maybe via email, SMS or by scanning a barcode. The mobile App uses the Browser or shows an integrated Web-Panel that opens a special page of the Webapp. On this page, the user has to login in, and could then allow the mobile App to read and write data. My question is: Are both ways possible and save? Which one would you prefer? What are the details to watch out for? Are there any other ways to do this? If I got it all right, it would not be possible to use OpenId on the Device, and link the mobile and the webapp that way, right?
View 3 Replies View RelatedAnyone know a good one-click widget to switch on/off the mobile network?
Have tried the one from Curvefish but its a shortcut and doesn't bring to the correct page.
I'm new to android but just used the guides at this forum to root my LG Optimus V. I was wondering if now that I have root there is a way to install a boot password similar to the one I have on my computer. Before it loads the operating system, the BIOS asks for a password. Is there any similar functionality for android?
Also, is this possible on other devices even if it is not on mine? It's one of my favorite laymen security measures.
I have had this same problem happen twice to me on 2 different phones on 2 different Verizon accounts!
The password screen locks and when it asks for the user name and password it states invalid user name / password!
Is this a known problem since when I called and talked to both Verizon and HTC the only thing they could tell me was to do a hard reset and they weren't aware of this problem?
Device: Micromax Canvas 2 Plus A110Q.
I recently used a pendrive through otg to transfer a few movies to my device.
After that i noticed a few issues, whenever i connect the pendrive my ringtones and notifications turn to default inspite the tones placed in phone memory.
The dialer changed to this crappy one automatically (as attached in the screenshot).
The phone restarted 3-4 times in the last couple of days when trying to open the dialer.
Do i need a factory reset?
I currently have a phone based on mt6577 where I started to modify the kernel to improve performance but I have a big concern about the swap. I want to enable zram.I turn on when I swap it ends up freezing the system reboots instantly or with a random delay. Kernel 3.0, 4.0.4 ICS
I tried to create a swap file system, the result is the same.I have been looking for a while or could be the problem but without result.
I have a rooted i9300 running slimbean 4.3.1.When i try to uninstall an app, my phone reboots itself.This also happened when i had stock rom.I have tried reflashing multiple times and it hasnt worked.
View 1 Replies View Relatedwhen my inc goes to sleep I do not get a notification sound for emails no more. I did yesterday but I tried it today and nothing!
I had played around yesterday to try old different things to extend battery life and must have changed something dang it! I tried menu-->wireless&networks-->mobile networks-->enable always on....and marked it. and I also tried to unmark it.
when I click on mobile broadband connection it says "connect to pc"?
didn't want to do hard reset because I had to put in all contact manually...ugh
I am coming from a BB...lol..so things were more complex. LOVE the Inc but there is so much do click wrong ha ha
EDIT: btw didn't get a sms/text yet so I don't know if I would get a sound then....
I'm having a weird issue where after I successfully rooted my Samsung Galaxy S3 (following a guide from androidcentral) every time my phone encounters an application force close, the phone will freeze up and eventually restart. Before rooting my phone, whenever an application would force close all I would get was a notification telling me <application name> had closed unexpectedly, as it should in Android. Now I'm not seeing that, phone just goes to black and then restarts. This wouldn't be a huge deal, but since I'm using it as a development platform, having your phone restart every time your application crashes takes a lot of time.
What's really weird is that Logcat will continue to scroll (in Eclipse) even after the phone is frozen to input (so its not a system wide lock up).
I downloaded Ditto Note 3 for my note 2, and i flashed it. It didn't work so whatever. After reading on the thread a little longer, it said i needed to flash a kernel. So after flashing ditto note 3 and the kernel i rebooted my phone to see that it was stuck on the Note 2 logo. I thought it was all fine until i booted into recovery mode to find that cwm would make my phone restart. I have backups of cm11 and stock touchwiz, can i flash them with odin? Can I go into my storage and take them out?
View 2 Replies View RelatedTablet model: GT90x I bought a tablet a few days ago.
I Rooted and installed Busybox Installer. Well After that my Tablet Rested it self and now it going to factory Defaults each time I turn it on.
-Whenever the Tab restarts it just looses all settings and starts like it is started for the first time, with all those first time tips and default settings. Even all apps are gone.
-All Apps suddenly vanished (Were installed in internal memmory, no sdcard used)
-If we try to install the app again using google Play, then google play hangs, does not install the app.
- If we go into settings->storage, the first internal storage shows 0.00Bytes
I tried to do: Factory Reset the device, Hard Reset the device, Restart insanely several times
I do have ADD installed but I don't know how to switch busybox over from /system/xbin and find busybox. Move it to /system/bin I can't Install Apps
I flashed my phone with a rom but after using it some time it became little leggy to so I reseted it the problem is now its been stuck on resetting animation and goes restarts again and agin and the (power+vol. down) button menu is cumming in Chinese and recovery mode is not opening the page was [URL] ....
View 9 Replies View RelatedI have rooted my iball slide 3g 7334i ( it runs on jelly bean 4.1.2) using following procedure :
http:[code]...
I have experienced following problems with my tablet :
1. When connected as usb storage device it restarts automatically.
2. Bluetooth once switched off can't be switched on unless device is restarted.
I'm in the process of figuring out how to develop for android...and I'm trying to add an EditText field but I get and error. Looking at the graphical layout, the screen fades out. Is there a reason this would happen.
I am also getting an error that says "Failed to load properties file for android project".
when I click on one item in the ListView that item's background changes to light gray, but when I continue to scroll through the list every 4th item has the background changed to light gray even though those other items have not been clicked. How do I make only the item I clicked be effected by the click?
ListView lv = (ListView) findViewById(R.id.resultsList);
lv.setAdapter(new ArrayAdapter(this, R.layout.resultitem, (String[])labelList.toArray(new String[labelList.size()])));
lv.setOnItemClickListener(new OnItemClickListener() {
public void onItemClick(AdapterView parent, View view, int position, long id) {
TextView tv = (TextView)view.findViewById(R.id.result);
tv.setBackgroundColor(Color.LTGRAY);
tv.setTextColor(Color.BLACK);
I have noticed that when using my phone to reply to a long string of text on forums (or at least some of them) I seem to hit a roadblock at some point. By that I mean, if I wanted to reply to a message like I am typing this right now, if I want to scroll down to the bottom I am unable to if the length of the text reaches a certain point. Or in another situation, I could be typing my reply, but once I write enough to reach that limit I am unable to type any further. This only applies when wanting to reply at the bottom of the string of text. There are ways to work around the issue, but in certain cases they aren't always preferred.
View 4 Replies View Relatedat the bottom you see a "Add relationship" field. If you click Add relationship, you are presented with a list of relationships. In here I selected Father. There is then an input box next to it.
What are you supposed to put in there? I've already told Google this contact is my Father, even if I put his real name in as the contact details, it still gives me that option.
At first I thought perhaps it was for Google Now. For instance, my girlfriend is down as her full name, so when I say "Call my Girlfriend" it would call her. However it seems like that isn't the case.
My MMS is not working after flashing a custom rom ( HTC ONE X on VirginMobile Australia ).I realize its to do with the APN settings , I have updated them manually but the MNC field needs to show : 02 , currently its set to 029 - if I change it , it deletes the whole new APN I have put in and Im left with no connection at all.
Is there anyway to change this MNC field? I read on another forum that there is a way through ES File Explorer... going into system/etc and the APN file - but I tried that , and there is def. no APN file in system
I have multiple Google icons in the connections field of many of my contacts.
how to remove all these duplicate icons and I don't want to delete the contact itself.
can't trigger the paste text actie option.
Is there a link or tutorial somewhere on how copy / paste / select text is supposed to work?
I have a ListView in my Activity. I am trying to catch both a click and a long click (which should bring up a context menu).
ListView lv = (ListView) findViewById(R.id.MyListView); ... lv.setOnItemClickListener(this); lv.setOnCreateContextMenuListener(this); ...
I notice that if I have both the click and long click listeners up, I won't ever get the long click listener (i.e. the context menu). If I remove the setOnItemClickListener() call, i get a call into
@Override public void onCreateContextMenu(ContextMenu menu, View v, ContextMenu.ContextMenuInfo menuInfo) {
You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers+unsubscribe@googlegroups.com For more options, visit this group at
I have just started my career as an android programmer, and am currently relying heavily on the sample code and api examples. I have been working with this api example, to produce an expandable list of items (note this example does not use the ExpadableListView).In playing with the example, I tried to add another widget that would become visible and be gone at the same time as the text (mDialogue in the sample code). This works well with another TextView, but as soon as I tried to add a button widget, it stopped working. The list would expand on first click, showing my hidden TextView and Button, but it will not disappear on further clicks. The button is however, clickable, and I was able to set up an onClick listener to change the button text back and forth.I'm starting to wonder, is it just not possible to have a clickable item inside a clickable list item? Or is there some kind of work around? Would it solve my problem if I used ExpandableListView?
View 1 Replies View RelatedI have a Samsung Galaxy S3 (4G). In the email application (standard) it seems to store all of the email addresses from emails I've received, even SPAM emails.
Now when I send an email and enter the "to" field, it suggests these email addresses. How do I clear out all of these stored suggestive email addresses from my phone? None of them are in my contacts lists.
Im using just normal pop email and the standard email app. I've tried cleaners, clearing cache, deleting email accounts - everything.
I am an IT Tech trying to work out a problem with a customers Android Tablet. The brand is something I've never heard of called a 'Gemini'.
Anyway, the onscreen keyboard doesn't activate when a type/search field has been tapped on the screen.
The OS is Android 4.1.1
He's other tablet which is the same works, but the screen is cracked so he bought another one of these hideous unresponsive pieces of crap.
evo password pattern only? or can i have a # password
View 1 Replies View Related