I've got a Samsung Stratosphere (I know booo) My phone rebooted and now it has the hardware info on the left hand side of the screen. I've posted a picture. It wont go on the mobile network at call (cant make calls).
I did a factory restore, unrooted and put the stock rom on, nothing works.
View 1 Replies
I got a chinese X12 dual sim phone because i really needed only 1 phone (had to carry around 2 of them).Phone works great, only problem is with the mobile networks. It can connect to GSM networks but it won't connect to a 3G network. The phone has 3G capabilities, 3G is enabled for the required sim, it finds the 3G network but it will not connect to it.
Sim works fine, had it in a Samsung i900 on 3G (WCDMA) The thing that surprises me most is that the phone came with android 4.0 instead of the 2.3.6 it was advertised, could this be the problem?
Today I installed a custom rom for my chinese phone Mlais mx65 everything works fine but, I can't connect to my network with my sim card, and it's weird i tried installing stock rom and other roms
View 8 Replies View Related'm having a problem with my Verizon G2. I had the Xposed framework installed, and I installed an app called Xorware, which is a toggle for 2G/3G/4G. I messed around with the settings in the app a little bit, and left it alone. A bit later, the phone stopped connecting to the mobile data network. I tried uninstalling the Xorware apps, wiping the cache on my phone, and even restoring to a backup where I don't have Xposed installed, and I'm still getting the same issue. Wifi still works, but every couple of minutes it disconnects randomly and then connects again. I also tried removing the SIM card for a few minutes after turning off the phone, and still, no luck.
View 1 Replies View RelatedI have installed the A Droid ROM by Ashish for Ace Duos link: [URL]...
In this rom i am not able to connect to 3G network. How to select the 3G network.
My htc magic 32a stuck in RUU mode, after I tried to update my magic to RUU and it failed. I can't even go to Recovery mode, but I can use fastboot in CMD.
and one more thing, I can open my magic everytime I use the fastboot command "fastboot oem boot", after that may magic will powered ON but everytime it will be turned off it will stuck to RUU mode. And I need it first to go through fastboot command "fastboot oem boot" just to open my magic.
before : S-ON with HBOOT-1.76.0010
after : S-OFF with HBOOT-1.76.2007
I've experienced quite a lot of problems with the WiFi after updating the Andriod. Everytime I try to connect to my home-network i get that it failed to connect.
The phone didn't have any problems with this before the update.
Anyone had the same kind of problem, or anyone that has a smart fix for it?
I love my aria, i got it 9/29/10, for free from best buy because my contract expired... but ive already used 20MB and i only bought a 200MB plan... i might go to 2 gigs, but for an alternate, since my billing cycle ends the 28th of every month... if i disable application syncing, and mobile network from the hold menu... can i connect to my home wifi network, and go on the internet from there without that using any of my data plan?
View 5 Replies View RelatedI have an Acer tablet and after a while using it it just disconnects from the internet and when I try to reconnect it can't connect to network. I got Acer Iconia A1-180
View 8 Replies View RelatedI just can't restore my adb backup to my phone now!I have an adb backup from Xperia V, now I want to restore it to my Note 2.When I connect my note to my computer and type "adb device" it can detect my note 2. But when I type "adb restore <filename.ab>, it says "unable to connect for backup"!
View 2 Replies View RelatedMy Galaxy s2 is stuck in downloading mode. I tried to root it again using odin but it didn't work.
View 1 Replies View RelatedI'm trying to download Life360 & it's stuck in downloading mode when I try to download it throught the play store. Nothing ever dowloads, I just see the horizontal bar with the download indicator "downloading".
When I try to get it downloaded from my computer to my phone by sending the link, I click on the link & get the message that it is already installed but then it starts trying to download the app with the message "Waiting for Wi-Fi". I don't use Wi-FI and I never knew this needed Wi-Fi to download. I dont' care to be charged for Wi-Fi.
How can I get this downloaded and why would I get a message that it is installed but get the above happening (i looked everywhere on my phone & it's not installed)?
I was downloading a bluetooth toggle button from the market, battery died. After plugging it in and turning it on, it's now in "Safe Mode". Says safe mode in bottom left corner, none of my app's show up, none of my widgets work.
Rebooted 100 times, held the trackball, held the menu button, held the back button, held the volume button, factory reset. Still in safe mode.
I Installed A kernal and my my phone got stuck on the HTC logo screen...I Managed to get past that but now its stuck in Fastboot Mode
idk if this is any use but it says
***RELOCKED***
***Security Warning***
HOLIDAY PVT SHIP S-ON RL
HBOOT-1.85.0025
MI CROP-0360
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
I am stuck in the recovery mode "FACTORY MODE" in my phone. I've enter in the recovery menu (power + volume up down) then I enter Factory Mode, then Item Test. And in this item test I don't have an option to return to previous menu tree, my phone only have UP, DOWN and POWER buttons, and none of them goes back to initial menu. Also the battery is non user replaceable, so I'm completely stuck in this screen. It's a motorola razr D3 XT920. I'm going nut's.
View 2 Replies View RelatedMy galaxy s2 is stuck in downloading mode. I tried to root it again using odin and it didn't work.
View 2 Replies View Relatedi had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install GB stuck which got stuck on Cache.img. i even dont know which stock rom i need. and where i can download it from ?
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
I am stuck in ODIN mode on my Note 3 and it says downloading... do not turn off target. I can boot with volume down and cancel but it just goers their again. Volume up goes to TWRP but i can't get my phone to just turn on normally. I was not attempting anything. This is how my phone turned on...
View 1 Replies View RelatedI have a samsung galaxy music duos . It had come with 4.0.4 - in network mode there were 3 options - GSM ONLY.CDMA ONLY & AUTO MODE.Now after updating to jelly bean it has got changed to At some places where 3g is available it still uses 2g and sometimes keeps switching between 2g and 3g . Is there something i can do to use 3G ONLY ie, CDMA ONLY network? Can apps like tasker do the job?
View 6 Replies View RelatedA Samsung Galaxy Note 8.0 is connect to a shared network drive located on the network it's connected to (eg \sharefoldersharesofficeshares) I open a file from the shared folder, like a word or excel document, and make some changes. Here comes the challenge: When I save the file, it does not save back to the shared folder but only locally on the tablet. That means that if I go to a computer on the same network, connected to the folder and open the file I just edited on the tablet; No changes has been made
The problem is that I have yet to find a android word/excel processor that has the option to save on a network drive.
The only solution without an app with the option stated above is to somehow syncronize the android folder where the edited file is saved. Unfortunately that requires some actions that I would not like to teach the non-IT personal who uses the tablet.
There is 3G into Android tablet.If device (Android tablet) looses network connection, it's just impossible to connect network until resetting of the device (Android tablet). What can be changed or adjusted in /system to fix it?
Specifications Android tablet:
Allwinner A10
Built-in 3G
7"
I've got a Samsung Droid Charge, which I've rooted. I had used it for about 3 months with minimal issues. Yesterday I noticed my phone was stuck in airplane mode, and no amount of phone codes, setting tweaks, and soft resets would get it out. I backed up everything with Titanium and did a factory reset. This gave me my signal back, and I started the process of restoring everything via Titanium. After the restore completed, I was prompted to add my PIN for my Exchange account, which I did. I then soft reset my phone...
When the phone rebooted, I was in airplane mode again, and the PIN unlock screen was blocking entry to my phone. I enter in the PIN I had set a few minutes previously...and the phone rejects it. I try it a couple of times just to be sure, and no dice. I tried what I thought were defaults, like 1111 or 0000 or 1234...nothing. After my attempts ran out, the phone hard reset itself again.
Just to see if I wasn't crazy, I tried the whole process again and got the exact same result.
Why is my PIN being modified without my knowing, and what is it being modified to? Additionally, why do I get stuck in airplane mode after restoring my Titanium backup? I'd like to be able to use my phone without worrying about the need to wipe it after a soft reset...
Have a new Motorola Photon and it's stuck in Portrait mode.
Already removed battery for a hard reset. Already checked settings - (display -> auto-rotate screen is enabled; ->kickstand enable is checked).
I rooted my phone a couple weeks back. I backed up my apps with titanium pro and downloaded ROM manager. I clicked "reboot into recovery mode" from ROM manager and the phone went into recovery.
I am now stuck. I have four options:
1. reboot system now
2. apply update from SD card
3. wipe data/factory reset
4. wipe cache partition
I tried option one and clicked the button on the right side of the phone (the "enter" button), but nothing happens. In fact, none of the options do anything. seems like the phone isn't recognizing the enter button.
I have not flashed clockwork mod recovery. I think it probably requires some type of reboot but i don't know the steps.
I had it first on the Galaxy S3 with 4.2.1 stock rom, I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns off but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
The only way to bring it back is by holding the power and home button together in order to reset it.I tried factory reset and it would not work, I flashed the phone with a custom rom for Paranoid Android 4.3 and it worked great for about a week, no issues at all, but then it started freezing when locked again.
I don't know if it might be an app that might be causing this, basically when i lock the phone the screen turns of but then when i press the power button or the home button to turn on the screen it does not do anything, I know the phone is still on because sometimes if i get a text message i can see the blue led blinking and it will continue to blink even when it's frozen.
Even worst, if i'm listening to music and i lock the phone or if the screen times out and locks when i try to unlock it i can see it's stuck but the music is still playing....
Also, if the phone is stuck and i try to call it, it will not ring not turn the screen on, it's not like the problem is just the physical buttons, i don't know what to do since the phone is out of warranty, I have never dropped the phone and there is no damage on it, it have never over heat either so i don't know what can i do...
I try to install the kitkat 4.4 on my nexus 4 and now i stuck on recovery mode.
i see this:
fastboot mode
product_name - mako
variant - mako 16gb
hw version - rev_11
bootloader version - makoz20i
signing - production
secure boot - enabled
lock state - unlocked
what can i do ? can i fix it ?
My Micromax a60 stuck on logo and not going in recovery mode. When i go in recovery mode screen becomes white.
View 1 Replies View RelatedI'm using Xolo q800. recently when i took it out from my pocket, it was turned off. so i turned it on,
the logo appeared but it directly goes to factory mode.
i can go up and down in factory mode but im not able to select anything.
Now im stuck in this factory mode and im not able to enter into user mode.
Basically its bricked now and not able to use my phone.
Tried taking out battery and re inserting it ! but no luck. Phone is stuck in Factory mode.
I have a Chinese 7 inch Tablet named Luv Pad AD701 based on Allwinner A10 processor. I installed "CWM 6.0.1.2_a10" and then rebooted to recovery mode. Now I am stuck in the loop of CWM Recovery mode. The tablet only opens recovery mode and desn't boot normally. I triesd to flash a new ROM but it says
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/command
Warning: No file_context
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at /cache
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: failed to find "cache" partition to mount at /cache
This tablet doesn't have volume up or down button.It only has power, back and option button.
I have a Galaxy s4 that's stock 4.3 ROM but rooted and CWM. When I go into Network Mode (4g 3g or 2g) I only have WCDMA/GSM, WCDMA only and GSM only. How can I add the 4G LTE option to this menu? Do I need to flash another modem or what? I'd like to keep my current ROM in case I sell my phone and to avoid issues.
GT-I9505