General :: Soft Bricked LG Optimus Sol (E730)
Nov 30, 2013
I SOFT BRICKED my lg e730 while trying to install HarshGinger v3.
I tried to root my phone, and everything was ok until I tried to install the rom. I saw in recovery how the rom was installing, and when all was completed the phone entered into a boot loop. I think that I should install first a stable cyanogen mod and then harshginger.. I think this is what I done wrong. The phone it`s soft bricked because I can reach to the emergency mode screen.
Question: I can do a reboot from ADB or I have to use KDZ? KDZ looks like the type of program used by the smart people and I`m not really that smart. I am looking for a simpler solution, like a combination of buttons or something.
View 2 Replies
Jun 18, 2012
My optimus SOl came with v10e SW version.I downgraded it to v10b vodafone since newer baseband were not supported by CM7&9.Yesterday i dropped it in water and now my speaker is not working.So i want to give it to company bcoz still it is in warranty.So i downloaded v10e and flashed it.My device booted up and i also created google account but suddenly i got black screen of crash dump.Now after every 2 or 3 minute it gives me such crash dump.I can't give my device to company in this condition. I also hard reseted it and reflashed 3 times.
View 2 Replies
View Related
Jun 14, 2012
Where i can found some roms or mods for Lg Optimus Sol (e730)?
View 2 Replies
View Related
Jan 15, 2013
so flash a rom but didnt like it and had to reflash my original firware. problem 1. didnt know it so i used the lg too putting in model number and imei and it told me i need V10B_00 (vodafone spain)
Flashed with KDZ no problems, Hard reset phone to exit boot loop booted to phone fine, read sim asked for pin fine, connected to network full bars fine, connect to 3g no problem all is working, EXCEPT! go to make a call goes direct to call ended. people cant call me either.
sim works fine in another phone so its not the sim or network.
can send receive texts fine its just the calls
tried flashing radio v10b zip wouldnt even recognise the sim flashed v10a.zip recognises sim but again no calls
View 4 Replies
View Related
May 19, 2012
So i've installed cm9 with ics 4.0.4 but i want to change it back to gingerbread and i don't know how.I've tried many times to do a hard reset but i can't ... Its there another metod to do that ?
View 1 Replies
View Related
May 26, 2012
i have a bricked lg optimus v for virgin mobile. My friend gave me this phone i did not know he used Rodimusrom http:[url].....html to modify it so i did a factory reset and that is what bricked my phone. i know how to go in recovery mode by holding the volume up button and the home button but other than that i do not know what to do.
View 3 Replies
View Related
Apr 14, 2012
I attempted to install transparent cm7.2 status bar and phone bricked (fastboot). I fixed it and installed other phone model's cwm with windows cmd command (stupid, I know). After this I'm always stuck at lg screen. Can't get into recovery either. Lg update tool does not find the phone, neither does cmd.exe. I sometimes get the ''colored snow screen'' or whatever I should call it. But it doesnt change the fact that the phone can't be recognized by anything.I can't turn the phone in any mode, it always starts with the lg screen.
View 8 Replies
View Related
Dec 28, 2011
I got an LG Optimus V. I rooted it today and everything was fine until i tried to load a custom rom through rom manager. I did a factory reset and now my phone is bricked. Upon power up i get the LG logo then a black screen. It will not let me enter boot mode or emergency mode.
View 3 Replies
View Related
Jun 25, 2012
Cant enter recovery as that reboot loops the cyanogenmod image, can I maybe use a custom flasher and flash the euro open BIN?
View 2 Replies
View Related
Jan 8, 2014
Ok so I rooted my LG Optimus F6 yesterday, I used root uninstaller to get rid of stock apps but by accident or careless I must have deleted LG setup wizard.. I later on that day Master Reset the phone and Now I can't get my phone to load up.. It turns on and brings me to LG setup wizard but says it unexpectedly stopped, I've tried hard resetting and I've went into safe mode and it brings up the message at the home screen, Home screen has unexpectedly stopped. Is there anything I can do to restore my phone back or somehow download setup wizard and install on to my phone from the PC. Also my PC isn't recognizing my phone so I can't even get into the files from the PC..
View 1 Replies
View Related
Sep 4, 2012
i have a Gigabyte GSmart G1345 Android Phone
its is Soft Brick right now
i can tell its a soft brick because i can still access the Recovery Mode
my main problem is all the Stock ROM updates can't be read by my phone
View 2 Replies
View Related
Jul 21, 2013
I've been scouring the internet for the last view months since initially attempted to root my admittedly out of date htc view. A friend gave it to me in exchange for an old comp I built. I attempted through revolutionary to root, went through HTC and unlocked my device, continued to try and root it but found no proper software that worked to do so. Even tried something called mulitool which was pretty cool, but didn't get the job done. After a time I gave up on rooting, and my tablet powered down and I found myself stuck at the recovery screen. None of the options for clear storage, factory reset, or anything else proved fruitful. I removed my sd and was able to boot up fine. This was months ago. Now I'm having a similar problem only now even without SD card it's in a boot cycle where it boots to recovery for 30 seconds or so and shuts down, then back to recovery and like this ad infintum.
my screen reads:
relocked
**security warning
express pvt ship s on rl
microp 0656
hdboot 1.14 0005
radio 1.05.01
eMMC-boot
View 8 Replies
View Related
May 21, 2013
i installed flyrom v4 in ma htc explorer through clockworkmod... When i tried to reboot it stucks in the htc splash screen..Still not coming to home screen. And i partitioned ma sd card ext2 using minitool and i linked it thru link2sd... But it doesnt mount in clockworkmod... But flyrom instaled perfectly...
View 2 Replies
View Related
Mar 21, 2014
last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..'
View 7 Replies
View Related
Feb 9, 2014
My Device was using L900SPTBMK4 and I want to do a restore. Kies doesn't recognize it when in Download mode, does it when is on the loopboot but never finished the connection, stuck a connecting.
In odin the device isn't recognized when in download mode either, as Kies, it recognize the device when stuck a the bootloop. I don't to if is safe to try a flashing in this mode.
Using ODIN v3.09
Autoreboot checked
F. reset Time checked
I don't remember what download mode I suppose to choose from BL/AP/CP
I also have this file L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 to try the flashing if recommended.
View 3 Replies
View Related
Oct 15, 2013
My Android phone is soft bricked it is an VS870 LG 4G Lite Lucid II.
This is the second time my phone becomes bricked due to my last incident with my samsung. It has nothing to do with it being rooted, but uninstalled some apps in the phone which I thought had nothing to do with the system. IDK last one I uninstalled was zappos. I know how to un-brick my phone, but my only problem is getting the phone to be recognized by my computer. I tried uninstalling and re-installing the drivers, removing the battery from the phone, using different USB ports still no luck . Could it be that the battery percentage went below 75%? if so I have no way else to charge, it does not seem to charge anymore?
View 5 Replies
View Related
May 26, 2014
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
View 1 Replies
View Related
Oct 11, 2010
My Captivate wont go past the Galaxy S logo screen anymore and the bottom buttons stay lit. I can get it into recovery mode but I would like to save some pics and vids that I have on the internal SD card. Anyway to save files before I Odin flash this thing? Droid explorer sees the phone but wont show the paths/files.
View 3 Replies
View Related
Jun 2, 2012
so I'm collaborating with a couple of members to port MIUIv4 from the e730 to the e739. The only difference between the two phones is the kernel.
I've fixed data, i can use Perl scripts, winrar, NotePad ++, (bak)smali and anything i can find on the internet.
Our ROM boots, but there's a screen corruption issue that needs to be addressed.
My question is: what could be causing it?
Tried:
-using cm9 hardwarerenderer
-adding "write sys/class/graphics/fb0/state 1" to init.victor.rc"
-htc one x brightness toggle.instructions for a similar problem.
View 3 Replies
View Related
Mar 21, 2012
I uploaded a custom rom on my xperia x10, for that i unlockd the bootloader and stuff..
Now, my phone is switched off since 15 days, when ever i try to switch it on, it vibrates once and nothing at all afterwards...if i press power button again, it won't vibrate, unless and untill i remove the battery and reinsert it in phone..
i see three red flashes of light, when connected to PC..
1. PC Companion for update, repair and custom repair is not working...most of the time phone is not detected..
2. SE-update service is also not working and phone is shown as Xperia arc..
3. Flashtool, doesn't recognize the handset
4. few, technician told me box flash would work, but again, it didn't work out
Now, i don't know much about this, but i do understand that hardware seems to be good, till now, the only issue is software and that to initial boot process i.e. bootloader.
is there any other way i can upload a new custom rom on my xperia ??
View 4 Replies
View Related
Mar 9, 2012
I have a [Gen2] ZTE v9 Tab which had 2.2 as the stock OS which I managed to get upgraded to 2.3 using modcore everything was gr8. I pushed my luck little further and tried to install Android ICS in order to do that I did a TPT using image file and after doing that my tab is bricked.
It's not booting into the OS I tried to get into the FTM mode but that doesn't work now only thing that work's is the ADB I tried the recovery methods that can be done through ADB but it says "sh:/sbin/recovery xxxx" missing.
What I think is that the system partition was recreated and Is there any way that I can get the system files on to the tab using ADB or a way to copy entire directory on to the tab using the ADB.
Got the system to boot to FTM but when I try to flash it the software fails and gives a error "Failed to Get aprmg x x x " some thing like that if there's a way to skip this I'll be able to get my tab back to working condition.
View 3 Replies
View Related
May 19, 2012
I got an HTC Explorer around a month ago and quickly found out how useless it was with the miniscule amount internal storage HTC decided to provide me with. So I quickly found jaggyjags' rooting tutorial found here: http:[url]....
All went well and I was happy with the phone, until some of the apps started bloating and I went a little too far with link2sd and tried to convert the com.htc app into a user app, which ended disastrously. Pretty much every process failed or had an error, so I tried restarting the phone and found myself in a boot-loop.
I then succesfully got into HBOOT and then into recovery. So I decided to try installing jaggyjags' custom ROM. After taking out my SD card to connect to my computer and copy jaggyjags' rom to, I got back into HBOOT, but could not get into recovery anymore. All the phone did was get stuck on the HTC screen.
After leaving it on the screen to see if it would eventually make it to recovery, I discovered that the phone is now dead and won't even charge. I'm not sure if it's because the battery might be dead or some other reason.
View 7 Replies
View Related
Oct 13, 2012
Ok i recently rooted my LG C800 or Mytouch Q using SuperOneClick which went well. However, When i tried to install a new rom using ROM Manager of the play store i first backed up my current rom and when it reboots its stuck on the boot LG logo. I have tried going into recover mode and it will show the android unboxing but a few seconds later it goes back to the LG logo. I don't want to say its completly bricked as i do get the LG logo.
View 4 Replies
View Related
Nov 1, 2013
I have a clone I9500. It has been bricked while I was trying to install a new rom
how shall I fix it. it has a MT6572 but recognizes as a MT65XX
some softwares says its a MT6589 AND SOME says MT6572
when I start up I keeps rebooting or gets stuck on the screen and I can acces the Boot manager
this is how is the boot manager:
Recovery
Fastboot
Normal.
it says alps.
View 1 Replies
View Related
Jan 5, 2014
Today i tried rooting my tablet using this URL>...I did everything from the instructions and first time didn't work. I tried 2nd time and it didn't work. Then I downloaded the RV27RC03_WW_GEN1 system.img, copied it in the "system_image" folder. I started rooting it for the 3rd time (because I was a fu*ktard) and when it finished it was bricked. I tried turning it on, but it wouldnt turn on, then i inserted a needle in the reset hole. It turned on, but it froze on the acer logo. When I got in the system recovery I made a factory reset.
View 1 Replies
View Related
Feb 22, 2013
Well I tried to create my own ROM. when the tablet boots, the back light comes on and that is all I get. When I press the on/off button the back light goes on and off. Another thing I noticed is that when I connect to the PC I can see the SD card and the External SD card mounted as MTS Device.
When I reset the tablet via the little hole on the top (next to the sound buttons) it just seems to switch off and then on again. I tried to switch the device off and try resetting (holding ON button + Volume UP + Volume DOWN) to get to CWM but I can't get into CWM. The back light just comes on.
I also tried to see if I could access the device via the ADB shell, but there is no device found. Which is weird as why does Windows see the device. I am not sure how to proceed. I also noticed that Windows (In device manager) sees the device as a Ramos W30HD and has an exclamation mark next to it?
View 2 Replies
View Related
Apr 29, 2013
So I made the mistake of attempting to root my new HTC one V without knowing what I was doing. I currently can't get past the bootloader screen. I've attempted installing the RUU for my phone with no success. I've resorted to extracting the rom.zip from the RUU, renaming it PK76IMG.zip (required for hboot to recognize it) and putting it on my sd card. Everything works fine up until the end when it says "hboot version is older! Update failed"
View 2 Replies
View Related
Mar 18, 2013
I have a problem with my Alldro speed i tablet that runs the original ics 4.0.4.it is a Chinese tablet. I think it is bricked because it won`t start. I see only the little android robo and thats all; no restart no nothing. i tried to format the soft and reinstall it but no succes.I tried resetting with the dedicated button but still no succes. the install was a success but the tablet isn`t working.
View 5 Replies
View Related
Nov 27, 2012
i flashed my Ace and it was working fine until i pressed that goddamn Factory reset button....Got it bricked, it has gotten inta a boot loop. I know this is'nt new but in this case i had'nt even enable USB debugging in my phone.
View 3 Replies
View Related
Sep 24, 2012
I got my Dad's old Motorola Fire XT530 recently. The thing is, he used the phone for around 2 weeks and then switched to a BlackBerry. He kept the phone switched off and locked up in his office bag. I fished it out yesterday and tried to switch it on, but it wouldn't even switch on. I connected it to the wall outlet and left out there for a while. The screen never turned on, but the lights on the soft keys below the screen did light up, so I assumed that it must be charging.
Anyway, after a while, I removed it from the outlet and switched it on, but it wouldn't boot up at all. Then I tried getting it into recovery and download mode, but it just wouldn't turn on at all. The device wasn't rooted, and I don't know what could have gone wrong that would make it like this.
I want to start developing for this device, seeing as there isn't even a decent ROM for this. I don't want to send it to the Motorola service centre; I have issues with them as it is.
View 1 Replies
View Related
