So i've installed cm9 with ics 4.0.4 but i want to change it back to gingerbread and i don't know how.I've tried many times to do a hard reset but i can't ... Its there another metod to do that ?
View 1 Replies
My optimus SOl came with v10e SW version.I downgraded it to v10b vodafone since newer baseband were not supported by CM7&9.Yesterday i dropped it in water and now my speaker is not working.So i want to give it to company bcoz still it is in warranty.So i downloaded v10e and flashed it.My device booted up and i also created google account but suddenly i got black screen of crash dump.Now after every 2 or 3 minute it gives me such crash dump.I can't give my device to company in this condition. I also hard reseted it and reflashed 3 times.
View 2 Replies View RelatedWhere i can found some roms or mods for Lg Optimus Sol (e730)?
View 2 Replies View RelatedI SOFT BRICKED my lg e730 while trying to install HarshGinger v3.
I tried to root my phone, and everything was ok until I tried to install the rom. I saw in recovery how the rom was installing, and when all was completed the phone entered into a boot loop. I think that I should install first a stable cyanogen mod and then harshginger.. I think this is what I done wrong. The phone it`s soft bricked because I can reach to the emergency mode screen.
Question: I can do a reboot from ADB or I have to use KDZ? KDZ looks like the type of program used by the smart people and I`m not really that smart. I am looking for a simpler solution, like a combination of buttons or something.
so flash a rom but didnt like it and had to reflash my original firware. problem 1. didnt know it so i used the lg too putting in model number and imei and it told me i need V10B_00 (vodafone spain)
Flashed with KDZ no problems, Hard reset phone to exit boot loop booted to phone fine, read sim asked for pin fine, connected to network full bars fine, connect to 3g no problem all is working, EXCEPT! go to make a call goes direct to call ended. people cant call me either.
sim works fine in another phone so its not the sim or network.
can send receive texts fine its just the calls
tried flashing radio v10b zip wouldnt even recognise the sim flashed v10a.zip recognises sim but again no calls
I've recently bought LG Optimus P936 true hd lte and it comes with Gingerbread 2.3.6 and it seems it can't be updated via "software update". This phone seems to have quite strong hardware so I wanted to upgrade Android to newer version. Is there any way I can do this?
View 4 Replies View RelatedI'm a proud user of a Sony Ericsson Live with Walkman and it's currently running on Hybrom v17 and Rage Kernel, but it's still signed as Android 2.3.4. I searched on the internet and it seems that people from my country, with the same phone model and operator are getting the official update... But I still don't have it in my PC Companion... Do I have to return to the stock version of Gingerbread to get the update? If so, do I have to change the kernel back to stock too?
View 2 Replies View RelatedHow do you uninstall unwanted apps that were there when i got my optimus v. They use up unnecessary space on my phone and some of them run in the background so i just want to get rid of them but you cant uninstall them in the applications menu?
View 7 Replies View RelatedMy cell phone is a LG Optimus Hub E510... i have instaled the Cyanogen 7.0 to substitute my Android 2.3.4 that was in my cell phone... but after i've instaled the Cyanogem the apps and games have disappear... facebook, whatsapp and other... i tried to install the apps again but my cell sends a message that they're already instaled... what can i do to my apps appear again?
View 2 Replies View RelatedI am using gingerbread 2.3.6 am board with my caller id so I want to change my caller id i tried FSCI and BIG! caller id both is not working when i try to attend the call but it show all the template which i have configured when i go to the green button it shows ur device forced to use system caller id and it comes back to that board caller id.... is there any way to change with working?
View 1 Replies View RelatedAny way to change gingerbread stock music background in tabview i.e the background of song list, artist, album etc..
View 3 Replies View RelatedI want to theme my gingerbread to jb.i've faced the problem with button.when i used blackish button(png).the text (ok,cancel) were almost got hidden.cause the text color are black.how to change it to white like ics/jb.For android 2.3.5
View 2 Replies View RelatedSince accepting the Gingerbread update, I have noticed that the Recent Calls feature of the Dialer now only shows timestamps in reference to the current time rather than the time the call occurred. Calls now show timestamps in the format of 1 hour ago or yesterday rather than displaying the actual time of the call.
View 4 Replies View RelatedI wish to change the 2 shortcuts at the bottom of Gingerbread default home screen (Phone, Browser) to something else (Messages, Gmail). But I couldn't find a way to change those icons either by press and hold on the shortcut, or by dragging icons from the Apps screen.
What's the best way to change them without using 3rd party launchers?
I just deleted the gallery application that comes with the phone (i dont know what i did it... ), and now i cant change the lock screen background.
When i try to do it from the configuration panel, it says "La application configuracion (proceso com.android.settings) se ha deterino inesperadamente"
Where can i download the original gallery installer?
Just did the Froyo OTA earlier - it updated without a hitch (and real fast thanks to broadband Wifi). I've been playing around with my "new" DX and no issues since the update this afternoon. Seems to working great so far. Even though Froyo has just been released I'm curious on what may be changed/enhanced/deleted/etc for Gingerbread (perhaps what other changes people here might expect or want). I have read some of the posts here about it and understand its mostly just speculation at this point, but I thought I might ask anyway. I do hope Motoblur might be removed or at least diminished more than it is now for 3.0. Its supposed to be out by the end of the year from what I've read. Also some have posted that the DX may not get Gingerbread. Hope that's not true.
View 18 Replies View RelatedHow to change the answer setting on a LG optimus showtime so it doesn't swipe?
View 2 Replies View RelatedI've recently been searching for a root for the LG Optimus L7 p705g v10e for a friend of mine and learned that there is no root available for this software version (v10e). I am unable to update his software version in order to root.
know a way to change this software version so that I will be able to root this phone?
so I'm collaborating with a couple of members to port MIUIv4 from the e730 to the e739. The only difference between the two phones is the kernel.
I've fixed data, i can use Perl scripts, winrar, NotePad ++, (bak)smali and anything i can find on the internet.
Our ROM boots, but there's a screen corruption issue that needs to be addressed.
My question is: what could be causing it?
Tried:
-using cm9 hardwarerenderer
-adding "write sys/class/graphics/fb0/state 1" to init.victor.rc"
-htc one x brightness toggle.instructions for a similar problem.
I'm trying to change back the band mode settings to "automatic" or "europe"
Why? I messed around with minimalistic text to get a widget that toggles the data connection on and off. But ended up with a widget that opens the band mode settings. The settings show only one choice "USA band", therefore I ended up with no connection at all.
I tried *#*#4636#*#* to change the settings back but it won't work.
[update] You can start the bandmode selection like this:
-start the debugging mode
-start an adb shell
-type:
am start -n com.android.settings/.BandMode
In the list is only one entry "USA band" although 6 entries should be listed
"Automatic",
"EURO Band",
"USA Band",
"JAPAN Band",
"AUS Band",
"AUS2 Band"
Is it possible to change the setting back to "Automatic" via adb shell??
The setting to change the band mode is listed in minimalistic text under
com.android.settings.bandmode
The device is an unbranded Atrix with Froyo and not rooted yet.I don't want to reset!
Any way that you can make the back button in the browser retain the same function that it normally would - IE taking you back to the last program you were in. I hate how it takes you back a page instead - I mean the Browser's back button is there for a reason, right?
View 9 Replies View RelatedI rooted my Droid yesterday and installed the 2.1 rom. I am not happy with the lack of keyboard backlighting and it seems quite buggy to me. I want to know how to go back to 2.0.1 Do I just replace the file in my nandroid folder with my original backup? One other thing I am wondering is, will having my phone rooted mess up any ota updates of 2.1 that Verizon releases?
View 11 Replies View RelatedI finally took the leap and installed a custom rom (Defrost 4.9). Before I did, I took a full android backup and a full Titanium backup.I suspect I missed something, but I can't seem to get my SMS messages back.Would anyone have any suggestions? It's not the end of the world if I have to restore the android backup to recover them, but I would rather not obviously.
View 6 Replies View RelatedI gave the update a chance, for something like a week. Finally put Panda back. I had hoped that the update might make it worth it.
I have no idea what the update was really supposed to do in terms of performance but it's been a zero sum game. I don't give a flaming politician about live wallpaper or exploding gallery icons.
I like Panda's pull-outs that go across all desktops and the alphabetical pull-up. The stock phone is really lacking in terms of app organization. Photo organization too.
I downloaded the 2.1 zip to sd card, and cleaned all off of sd card, EXCEPT the zip file. Put the other 1.5 files on another sd card Installed 2.1, no issues at all. Runs great. Do I need to put those misc files back on, or are they included in 2.1.
View 3 Replies View Relatedjust rooted my eris and flashed kaosfroyo v32.. I changed my wallpaper, how do i get the Kaosfroyo wallpaper back that came installed when i flashed it?
View 5 Replies View RelatedI installed fresh .3 now my front camera works but but rear camera just shows like a pink white noise type fuzziness anyone heard of or seen this?
View 2 Replies View RelatedI seem to have deleted the navigation app with the blue arrow that was installed with the last update, does anyone know how to get it back? It was really useful.
View 1 Replies View RelatedHow goes it fellow Droid users.
My question is how do I get the weather from when i installed weatherbug back in the notification screen. I ended some tasks and it disappeared and for the life of me I cant figure out how to get it back. I hope im not missing something that is really simple here.
I would like to know if anybody already changed installed voices on TTS. My Tattoo have English (US) , English (UK), French, Italian and Spanish languages for TTS but all woman voices . Any one know where can i get more voices?
View 8 Replies View Related