I'm a rookie with computers and have been trying to set up my Zeepad with my Airport Extreme. I have returned the Zeepad to factory settings and cleared the cache. (Don't get excited like I actually know what I'm doing, I followed directions on this website.) Also I unplugged the Airport and plugged it back in.
View 4 Replies
I've been having the same WiFi connectivity issues mentioned by other people. With my Airport Extreme Simultaneous Dual Band, I couldn't even run the Speedtest app to completion more than once or twice before the X would drop the connection.
Other people have mentioned that it seems to be related to 802.11n - that 802.11g access points weren't having issues.
Many people with Airport's aren't aware that you can configure the radios in a much more fine-grained fashion than is immediately obvious. You can set it up so that it runs 802.11n only on the 5Ghz band, and 802.11g on the 2.4Ghz band.
To do so, start up the Airport Utility, then go to the "Wireless" tab. There's a drop-down for "Radio Mode", which normally only shows three radio options.
On a Mac, hold down the Option key ( Presumably Alt on Windows ), and THEN click Radio Mode. You'll see about a dozen new options.
I chose "802.11n only ( 5 Ghz ) - 802.11 b/g"
This should ensure that clients that have have 5Ghz receivers still get the benefit of having the high speeds from 802.11n, but that 2.4Ghz clients see only a B/G access point.
After making this change, my X has NEVER dropped the Wifi signal. I've run literally dozens of Speedtest checks and it works every time.
So, if you have an Airport Dual Band, you might want to try it out. People with other AP's should see if theirs offers equivalent functionality.
Hi..I am new to this forum, and to the 'Droid' which is probably way too advanced for my brain to handle..I turn on the Wi Fi settings, it sees my network, I've added my Droid to the Airport Extreme, and I've changed settings to "robustness" as I read in other posts..Nothing seems to work. I am in Extended Network, and the only reason I agreed to get the phone is the salesperson said I could connect to my home computer router..I have searched the internet for hours, and tried different things, but I'm CLUELESS!
View 10 Replies View RelatedI have a very big problem, as my Nexus One is draining heavily. My Nexus One drains 1% every 4 minutes, no matter which ROM I install Sense, AOKP ICS, MIUI (ICS) and even Stock. The battery remains the same, I have tried various options: from calibrating the battery, wiping battery stats to purchasing a new battery. Neither of those options worked out. The battery still remains the same. My guess is that it's a hardware error.I have no guarantee, as my bootloader is unlocked and I opened the phone once.
View 2 Replies View RelatedBefore I entered the world of custom ROMs, my i9300's battery was fine. However, when I flashed my first custom rom months ago (CM10.1 nightly), my battery would drain from 100% to 0% in around four or five hours. This was only on light to moderate use, with a bit of Web browsing and Kindle. GPS and mobile data are almost always both off, other than when I need them, and brightness is set at the lowest possible 90% of the time. I checked my battery usage in the settings and there was no evidence of the renowned mediaserver cause of battery drainage, so I'm not really sure what the cause is.
Also, a few days ago my phone began reaching extreme temperatures when I executed any operation on my phone. At the moment I am typing in xda only and my battery is at 111 degrees. I noticed that it began with a certain nightly of Carbonrom and Temasek kernel.
I have done numerous factory resets and flashed different ROMs and even gone back to stock and fully unrooted, but the problem persists.
Whether SanDisk 16GB Extreme Pro microSDHC UHS-I Class 10 Flash Memory Card is compatible with Micromax A116?
This is a new Memory card launch by Sandisk with has read/write speed of 95Mb/s.
Wondering if there's an app that works really well to stream music from my phone (HTC Evo 4g LTE) to my speakers that are hooked to an airport extreme. The ones I have been able to find on the market don't work very well.
View 1 Replies View RelatedI posted a while back about my Eris heating up. Today I was on the phone to tech support for a computer issue. I had it on speaker phone and was on hold for about 30 minutes or so. I picked it up and it was so hot I dropped it. I checked the temp: 145.5f. I snapped a quick picture then put it in the freezer which has since cooled it down to 80f. I KNOW something has to be wrong with my phone but I have gone into the Verizon store already and they told me they can't do anything because I'm running the leaked version and that is most likely the problem. I called Verizon and they told me to go into the store. What should/can I do? Should I go in again with the new picture and show them?
View 3 Replies View RelatedI was usind ADW for a while and liked it. I like LP better because of the scrollable bar bit when I hit the home key or back up to home, about 50+% of the time it takes ten seconds to redraw. I do ude widgets but it should not be this bad. In settings I tried keeping LP in memory, I set high mem useage and many of the other options and its the same. I even uninstalled wiped cache pulled battery and its the same. Is there a setting config I should be using, or not?
View 2 Replies View RelatedI'm running BB V0.4, but I would like to install UD Extreme 6.0 from what I've read all I need to do is flash with SPrecovery now here's where I get confused..do I need to find a theme to use with UD? or do I just install it and I'm done...if i wanted to install a custom theme how would I go about doing it.
View 2 Replies View RelatedI am wanting to download this app but it is not available in the market on my tattoo. Does anyone know where I can download it? (I have tried getjar bit could not find it?)
View 2 Replies View RelatedThis may be a simplistic question, but one reason I went with a web browser phone is so I can do browsing while in the airport. Is this possible with the phone as it is or do I need to use Wifi? To be honest not even exactly sure what it is used for.
View 4 Replies View RelatedI was at the Newark Airport yesterday and got 4G. Averaged 5700 down and 1075 up. Signal was 2-3 bars but did not extend into Newark or south into Elizabeth. Signal only on exit 13a on NJ Turnpike.
View 1 Replies View RelatedAny way to get the Airport IATA code to be used in a new app ? I was thinking about using a web service, or as last resort a local db.
View 1 Replies View RelatedI've searched for other threads but although somewhat similar they are not experiencing the same problems. Ok according to att's time logs of the phantom data usage times, it is exactly the moment i leave my wifi home signal and the phone switches to 3g. At that time a download ranging from 44mb to as big as 120 mb is added to my data plan. But i'm not using the phone. I have not downloaded any new apps, using my phone, or didn't anything different out of the ordinary. I have done one thing recently, that are not my usual. I rooted my phone with one click lag fix, the same day all the data was being done was being phantomly downloaded i updated one click lag fix or 3g. Now ever since then my phone uses data when i leave my wifi home service.I'M ALREADY OVER 247MB OVER 2GB'S
View 6 Replies View RelatedVery nice. I only live a mile or so from here. Hope it comes soon!
View 4 Replies View Relatedi just picked up a droid. i will be going on vacation next week and was wondering if there are any good, free flight-status/airport-status tools. haven't found any so far.
View 4 Replies View RelatedWhat sorts of airport/airline apps are available and useful? FTR I'm flying Southwest.the greyhound of the skies
View 4 Replies View RelatedThis route is about 4 years old. Using my window 7 laptop, able to access the internet.
Network connection detail of the window 7 laptop:
DHCP Enabled: Yes
I have a new Droid Incredible. I am trying to get it set up, configured, etc., and was trying to connect to my home WiFi network. I have an airport express (in bridge mode) connected to a router. The router is connected to my cable modem via ethernet, and also connected to my Mac desktop via ethernet. My Incredible can see my home network, but when I try to connect it hangs at the "acquiring IP address" stage and eventually fails. I know my phone is functional, because it connects fine to the wireless network at work. I know my home network is fine, because I can connect to it via my laptop no problem. I'm sure there is some setting that I am messing up, but I'm pretty naive about networking issues.
View 3 Replies View RelatedIm coming from an HTC Touch hear in Dallas and after a great week with the Moment I am concerned about the radio in this thing. My issue is that I get NO bars at work near DFW Airport. Iv updated the PRL and the latest maint release but the thing still doesn't connect while at work. Any idea for fixing the sensitivity so I can make calls at work? I am sooo tied of hearing the ?Lack of Signal beeps? all day long. Vz droid my co-worker has is solid 4-3 and he laughs at me as he says it must be his coverage map blocking my signal.
I though Sprint could connect on VZ s network?
My desk at work is basically in a cellular dead zone. No Wi-Fi either... But I was wondering, I have a brand new Mac Pro with bluetooth capability and AirPort (and USB, of course). Is there a way that I could have my Droid 2 connect to my Mac and use its network connection to access the interwebs? I'm not worried about making calls...
View 4 Replies View RelatedIt seems there is a general voice search / voice recognition issue with non-english languages. The problem is basically that punctuation is written in plain and not recognized. It seems to affect a number of devices (if not all?) running ICS / JB.
So period will write "period" and not "." .
Same for comma that will end in writing "comma" and not ",".
(this of course in each different Language)
This basically makes the voice recognition totally unusable and useless for anything but English. So far, this issue has been reported with the following languages:
French
German
Spanish
Italian
I'm not allowed to post links yet but if you go to Android official project page, in the Issues and search for punctuation, you'll basically see all those.
I am trying to get in to the General Settings page in Gmail on my Hudl to change the "swipe to delete" value, but I cannot find the page. When I go into settings there is a General link but it only shows
- Auto advance
- Message text size
- Ask to show pictures
I have tried different contexts, inbox, recycle bin, unread email, read email, but cannot find this setting, in fact according to the Google support page I am missing a whole range of settings.
Recently I bought new General mobile discovery, but I don't know how to root it because I havn't got any tutorial bout rooting general mobile discovery.
View 1 Replies View RelatedI am using cm7, but this is a general question about replacing files in roms. I have been working on an issue that involves opening the zip file and then edit and replace certain files. I have seen a few posts in the past where it says to replace certain files in a rom, but everytime that I do I get an error after flashing. After flashing and boots to the main screen that asks you to touch the android, I get an error that says "Sorry, the process com.android.phone has stopped unexpectedly" and the only option is to click on Force Close, but it just keeps coming back. Something is definitely not right with replacing files in a rom, but Im not sure if there's even a correct way. Im using winrar as everyone has mentioned. I have tried using the Fix Permissions option in the Clockwork Recovery also, but no luck. Only option is to reflash. Does the whole rom need to be recompiled?
View 1 Replies View Relatedinstall quite a few roms on my phone, and i usually restore my apps/data with Titanium Backup.
What i am asking, could restoring these apps for each rom slow the rom down in general? Or will restoring the data not effect it at all. Its just some roms feeling a bit sluggish after restoring them.
i know there are many ways to root different devices.however when the hackers hack the new devices, how do they root them?
View 8 Replies View RelatedI would like to change my region/language setting independently from the general LANGUAGE-SETTING in settings !!!
Ok that means i dont care about the language my apps will be displayed in as long as it is english "which should be in every rom.."
But i do care about the region they are set in... means when i start MIUI News/Weather (geniewidget.apk) I want to see News from Germany and temperature in Celsius..
When I play "who-becomes-rich" I want Euro for currency! and so on ...
Is there any way to set the region like that ? (build.prop or anything else..?)
Im using MIUI v4 with my G-Nex.
It's 643/722? Why does it go so high ?
View 11 Replies View Related