i was listening to music on my samsung galaxy sII and then it stopped and turned black , i removed the battery and placed it again , after that it was stuck in the samsug boot logo where it started to show samsung multiple times , i did the same thing remove and place the battery and after that it just turned black and doesn`t turn on again or even charge.
View 1 Replies
I dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies View RelatedToday when I'm was coming out of gym my phone just fell to the floor. The battery disassembled but it seemed not a big problem.
When I tried to switch it on, the screen became black, but i noticed that the screen turns on because it is not complete black, i noticed a bit of light change. And the most amazing is that I can ear the sound of the music of boot, and the tactile buttons are also with light.
Maybe I can't solve it at home because i would need to dissasemble it but I look for my guarantee and that's in time, the problem is that the phone is rooted, and with rom enhance 236, and this broke my guarantee, can install stock rom just using usb cable?
Lately my phone has made it a habit of showing a black screen when I open an app. At first it was just one app that I could not open, and now most apps have this problem. It is very difficult as even my contacts and messages aren't showing. Also sometimes it starts buzzing with no reason.
I have tried to re install some of the apps, however this did not work.
My phone is a Samsung Galaxy Ace GT-S7500.
My Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
I have now had 7 random crashes in two days and the only way I know to get phone back on is to take the battery out and replace it. When it crashes - the screen goes black, but the green alert light still flashes. Does anyone else have this or a solution? It is stock with just a few added apps from the market.
View 19 Replies View RelatedMY SITUATION: My phone was rooted with unrevoked3. I tried to install one of the modaco ROMS and did not realize that it was incompatible with my phone because my Desire has a newer type of screen (not amoled) but SLCD. This caused the phone screen to go black on start up and be unresponsive. It was frightening because at first the HTC bootscreen (green HTC on white) had black streaks through it , then goes black. But don't worry it is easily redeemed in below instructions. You need the latest ROM in zip form, put onto your phone and run recovery. Sweet as suzi, you will be debranded (if you were in the process of doing this , remember to make your gold card).
ISSUE:
1. Desire screen not switching on at all even though phone switches on.
2. Phone boots but doesn't go beyond bootloader/recovery/fastboot
3. Can get into recovery even though nothing comes on screen (test: press volume down and power. Wait for 10 seconds. Press volume down. Press power. Phone should vibrate. Wait 20 seconds. Phone should now be in recovery mode.)
4. Can get into fastboot (back+power)
5. No goldcard
CAUSE of ORIGINAL AUTHOR'S ISSUE:
I had Aura Sense7.9+AlphaRev S-Off. Cause::Ran a very old RUU just because I wanted to bring things back to stock. The RUU overwrote my HBOOT from 0.93 to god knows what. Turned out, the RUU was for amoled screens and not for SLCD screen. So even though the phone turned on, the screen never did......
First of all this is minor Bug, but still - BUG! There is phone configuration description:
Phone: Xperia X10i
FW: android 2.1
patterns - default slider + unlock pattern
Bug description
1) When phone is locked, press home or power button.
2) move slider, to be able to draw pattern.
3) Start to draw pattern and wait till screen goes black (do not remove your finger). So your pattern is not finished and screen has gone black. Try to remember place of the finger.
4) Press home or power button again.
5) Finish unlock pattern from place you was, when screen turned black.
6) Your phone is unlocked!
So, if you did not finished your pattern and your screen have gone black you might think, that the phone locked, but this is not true. Your Phone can be Quite Easily unlocked in the Pocket.
I have a Galaxy S (GT-I9000M) which doesn't boot past the start-up splash screen and sound effect. Eventually it will just switch to a black/blank screen and do nothing more. The back and menu buttons still light up if tapped.
The history how I got it this way, was I was using the app web-sharing lite to transfer some files through wifi without the need of a usb cable. I was transferring a large movie file when the phone locked up. I reset the phone, and upon boot every app and service was crashing. Tried this a few times, then pulled the battery etc, still the same. Then I booted into recovery mode(vol up+home+pwr), and applied wipe data/factory reset, then rebooted. This is when it started to only boot into the black screen.
This is a Canadian phone, service/bought through bell, the phone had the one click root applied to it so TI Backup could run on the device. So I think I'm out of luck with any warranty service.
I can get into the phones recovery mode and download mode, so I think there is still hope for this phone to be recovered. What I don't know is what firmware version Bell ships with these devices, and where I can download it?
I installed ADW.Launcher today on my Galaxy S, and have ended up with a black screen. I'd like to fix it without a factory reset, if possible.Galaxy S, Android 2.1, bought in Singapore, SingTel settings but bought it unlocked. Currently in Indonesia. (Can't look up Baseband Version, Kernel Version and Build Number on the phone now for obvious reasons.)A short while after installing ADW.Launcher, the Home button became unresponsive, and a minute or two later the phone restarted itself (the way it's done by itself a handful of times since I bought the phone - without going through the whole power down and power up sequences of sounds and graphics). Then I only had a black screen with date and time at the bottom, and the menu and back buttons lit up, and now I can't get the display back. It seems to start normally, with the logos and sounds, but just returns to that black screen with date and time.
I know something's going on inside because I can swipe to unlock the screen (giving me a purely black screen). If I then press and hold Home, I get the haptic vibration that normally goes with the "recently used" menu. But if I randomly tap all over the black screen, and try to use the menu and back buttons (guessing where the menu items are) I get no response, and no haptic vibration.Holding down the power button gives me the usual power menu - I can select "Power off," but it restarts. I've removed the battery a couple of times, waited and replaced it - but no change.
At first I thought it was related to my SIM card, as it did the self-restart thing yesterday about 20 min after I got a new SIM card. But doing a google search suggests that this problem is sometimes related to launchers. And I removed the SIM card and restarted (removing battery) and it didn't help.The closest I could find to an answer to this problem was in the Droid X forum: HELP! I uninstalled launcher pro, and now have a black screen! - The solution there was to do a factory reset. I'd really rather not do that, but may not have a choice.
I just plugged into Kies and performed a Firmware update, which I assume was the Froyo update. It all ran it's course perfectly and the phone then went to reboot. Following this, it hung on the Galaxy S animated screen before simply going to a black screen (I know the phone is still on, because the two bottom corner buttons will light up if pressed).
I realise that this black screen is quite common, and that people suggest booting into recovery mode. The problem is, I've never been able to get my phone into recovery mode. I turn the phone on and hold down Power + Home + Voume Up for a couple of seconds and then let go... it does nothing, it just goes onto the Vodafone screen and then carries on booting.
I also tried holding down these buttons for a little longer, but all that it does is pushes the phone into a constant restart loop (as obviously I'm holding down the power button).
I am using GAOSP B2 and when I make try to make a call it dials out but the screen goes black and the only way to get out is to remove the battery. Strange the first call I made with this ROM was fine. Anyone else have this issue?
View 2 Replies View Relatedfirst of all let me just say that beta2 is superb i just have one problem with it whenever i'm in a call (reciving or dialing) the screen goes blank and i cant wake up the phone not the end call button and not the open (side) button the only ways i can wake it up is by getting another call or rebooting
any way to work around it? i have tryed several screen on pogs from the market but no luck there without it i would use it everyday, its much much better then galaxo.
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies View RelatedI have an issue since i start installing custom ROMS. So, is not my first time installing a ROM. I have installed stock ROM's in the past. However, not custom ones. I have rooted my device in the past and even now before installing a custom ROM. I have installed through TWRP recovery various custom ROMS such as Omega, AOSP, ARROW, WanamLite, Google Edition and CyanogenMod but none of them worked fine for me.
In some ROMS I might not have reception (don't worry the IMEI is the same and backed up). However, in EVERY ROM my dialler crashes; for example, when im trying to make a call it freezes and the screen goes black without seeing anything. On the other hand, when I receive a call, screen takes ages to appear and show the caller or even accept the call. In addition, I have NO SOUND at all in every ROM as well.
I believe that the kernel might be the problem. This is because when i am booting the phone I always see the following:
I have tried clearing cache, dalvik, removing battery, installing stock ROMS etc.... and nothing changed!
I recently rooted my Sprint Galaxy S3 (4.12) but decided unroot it yesterday using Odin 3.07. I flashed a stock rom from Team Epic, but ended up with a black screen with a blue led when I tried to turn it on. I have access to both download mode and stock recovery mode (no CWM or TWRP).
View 1 Replies View RelatedI have HDC Galaxy S4 exynos. I have a problem, when I call out the screen goes black, and I charge my battery full, but it very fast discharge or when I restart my phone, it show my battery percentage 10-20%.
View 7 Replies View RelatedMy aunt gave me a Samsung Galaxy S2 and everything was fine, except that it didn't let me register to the network. The next day it told me that it had to do an update so I did the update. After the update the home screen turned black and pressing the buttons didn't do anything. After a while an error pops up saying "application is not responding" and then the screen just stays black. The top bar works just fine and I can even go on the internet, play games, practically do everything. I did a factory reset by pressing Volume up + Home + Power 3 times already, but the only thing that changed is that the language turned into German.. the screen stays black. It had nothing to do with Rooting or Flashing, because I don't even know what that is.
View 2 Replies View RelatedI dropped my Note 2 yesterday and the screen started slowly turning blue. This morning, the screen completely got filled with blue/white/messed up color, and then went completely black. Touchscreen still worked though because I was able to maneuver around the phone right after it was dropped. Screen was not cracked. does the screen has to be replaced as well or i can replace it with smaller parts?
View 2 Replies View RelatedSamsung S3 Black-screen on startup?
View 2 Replies View RelatedWhen I turn WiFi on, it always say "Unable to Scan for Networks". I tried to turn off, pulled the battery, turn back on but does not make any different.
View 9 Replies View RelatedScreen won't turn off when I press the red/end call button after checking the time or wanting to go dark while listening to Pandora. I do not have ATK or similar I do not have Panda Home or similar.
View 11 Replies View RelatedSo i was busy installing apps and moving them around my screen when i accidentally hit the auto-brightness toggle on one of my newly installed widgets, i went to hit it a few more times to restore my previous brightness, but my screen totally turned off. The phone is still on, if someone calls me i can hear the ring tone perfectly.
I've done some Googl'ing looking for answers but i havn't found anything useful, I have already ordered a replacement fascinate under warranty, but it would be nice to find a solution to save myself 20 bucks on a zagg invisi shield..are there any know solutions or ways to factory reset without using the screen?
The Samsung logo and Galaxy S boot-up are visible, but when it normally shows the unlock screen its completely black
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
View 8 Replies View RelatedMy galaxy s duos gt s7562L is crazy, the wifi does not turn, it becomes bright green color, and when it does turn on only for two or three seconds and then my phone reboots, I have to remove the battery to stop doing that.
Sometimes I turn it on and do not touch, and I want to unlock it after 45 minutes I realize that is off.
I made a black bar for galaxy R10, very similar to micro's for the old version. Can't change the clock color due to it being in an ODEX file. But the notification colors are white letters and the bar is black with a white spot behind the clock. Would anyone want me to upload this? Also it has the battery mod (Just like the one in NoTwiz),
View 9 Replies View RelatedI have an original s4 black version but I recently found out that they have released a black edition s4 that features the same leather back found on the note 3? do any of you know where I can buy this back and wether it will be available?
View 1 Replies View RelatedSometimes when I hit the screen/power button the screen will stay black and i can see the menu bar up top fine but all else is black. If I hit the home key then all lights up fine. Then sometimes Ill hit the button and it works fine.
View 3 Replies View Relatedi have tried to install kitkat version for galaxy y duos s6102,for that i installed clockwork mod n cynogenmod n kitkat file..but after installing the screen goes blank,nothing appears except Samsung logo screen,
View 2 Replies View RelatedI've been working on a Black Status Bar + Icons only and I'm nearly done. I use Galaxo 1.6.3.4 and jakax's dalvik with jit. I'll release the service.odex, service.jar and framework-res.apk as soon as I am done
Only hiccup ? Do not know ow to change the color of the Operator Name in the notification/status bar.