I have HDC Galaxy S4 exynos. I have a problem, when I call out the screen goes black, and I charge my battery full, but it very fast discharge or when I restart my phone, it show my battery percentage 10-20%.
View 7 Replies
I bought a cheap (all I could afford) jelly bean Chinese Star N9776 phone 6" and on the whole have to report its great for the money. The only problem is that when I make a call or receive a call the ALS_PS sensor I think turns the screen off and it will not come back on until the call ends.
I have searched for answers and have found that this is a common problem. One thread suggested that if you enter the boot menu with the volume and power key you can sellect an option to disable this feature. However the menu is in Chinese !!
When I was transferring a few files on my I9500, I've noticed that I've lost at least half of my device storage.
When I go to settings -> Storage it says total space 8.80GB and available 3.75GB. I'm pretty sure I have the 16GB international model Galaxy S4.
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies View Relatedi bought samsung galxy s4 from 7 days and it workng good until once i was making a call and it said ( not registerd on network ) i opened the flight mode and turned it off and restored the apn settings too default and reseted the phone 3 times an 2 ith hard reset !
View 2 Replies View Relatedi have one Samsung Galaxy s4 Mtk 6572.When i install any app, she instal of internal memory , i have sd card 16 gb, and my phone have only 200 mb internal memory .I can't transfer apps yo sd card.He show me 16 gb but when i instal for exemple Facebook App , he occupy 17 gb... i have 4 apps installed and my internal memory storage its 22gb occupy.... and available its - 654675433.
View 4 Replies View RelatedI would like to ask if there are any kit kat roms for Samsung galaxy s4 i9500 & Samsung galaxy note 10.1 as i have both and wondering if there are any custom roms out there that i could install on my devices.
View 1 Replies View RelatedI dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies View RelatedToday when I'm was coming out of gym my phone just fell to the floor. The battery disassembled but it seemed not a big problem.
When I tried to switch it on, the screen became black, but i noticed that the screen turns on because it is not complete black, i noticed a bit of light change. And the most amazing is that I can ear the sound of the music of boot, and the tactile buttons are also with light.
Maybe I can't solve it at home because i would need to dissasemble it but I look for my guarantee and that's in time, the problem is that the phone is rooted, and with rom enhance 236, and this broke my guarantee, can install stock rom just using usb cable?
I've just rooted my s4 i9500 runing official os 4.4.2, im new at this, I rooted my phone so I could get a different experience with it, like overclocking cpu to get faster performance (dont really know how to do this now that I have root access) (not thats runing slow, but just wanted to get the best out of it) Im really new at this I barely learned the process of rooting I've read I can flash a new rom like cyanogenmod (i guess is the best because it gets a lots of reviews) the thing is im not really sure how to do it and also is it worth it?
I want to get the best out of my phone (speed and goodlooks) mostlu because im bored of the original touchwiz.
While using my Galaxy i9500 it crashes and phone automatically restarts with 0% battery percent
I tried this Battery Calibration app but it didn't work It says battery stats file doesn't exist!
I tried installing new rom but now as soon as I turn on the device it works for like 2 minutes in its real charging percent (e.g 60%) then crashes and restarts to 0%
The battery is original and It's not swollen.
Lately my phone has made it a habit of showing a black screen when I open an app. At first it was just one app that I could not open, and now most apps have this problem. It is very difficult as even my contacts and messages aren't showing. Also sometimes it starts buzzing with no reason.
I have tried to re install some of the apps, however this did not work.
My phone is a Samsung Galaxy Ace GT-S7500.
I have an issue since i start installing custom ROMS. So, is not my first time installing a ROM. I have installed stock ROM's in the past. However, not custom ones. I have rooted my device in the past and even now before installing a custom ROM. I have installed through TWRP recovery various custom ROMS such as Omega, AOSP, ARROW, WanamLite, Google Edition and CyanogenMod but none of them worked fine for me.
In some ROMS I might not have reception (don't worry the IMEI is the same and backed up). However, in EVERY ROM my dialler crashes; for example, when im trying to make a call it freezes and the screen goes black without seeing anything. On the other hand, when I receive a call, screen takes ages to appear and show the caller or even accept the call. In addition, I have NO SOUND at all in every ROM as well.
I believe that the kernel might be the problem. This is because when i am booting the phone I always see the following:
I have tried clearing cache, dalvik, removing battery, installing stock ROMS etc.... and nothing changed!
i was listening to music on my samsung galaxy sII and then it stopped and turned black , i removed the battery and placed it again , after that it was stuck in the samsug boot logo where it started to show samsung multiple times , i did the same thing remove and place the battery and after that it just turned black and doesn`t turn on again or even charge.
View 1 Replies View RelatedI recently rooted my Sprint Galaxy S3 (4.12) but decided unroot it yesterday using Odin 3.07. I flashed a stock rom from Team Epic, but ended up with a black screen with a blue led when I tried to turn it on. I have access to both download mode and stock recovery mode (no CWM or TWRP).
View 1 Replies View RelatedMy aunt gave me a Samsung Galaxy S2 and everything was fine, except that it didn't let me register to the network. The next day it told me that it had to do an update so I did the update. After the update the home screen turned black and pressing the buttons didn't do anything. After a while an error pops up saying "application is not responding" and then the screen just stays black. The top bar works just fine and I can even go on the internet, play games, practically do everything. I did a factory reset by pressing Volume up + Home + Power 3 times already, but the only thing that changed is that the language turned into German.. the screen stays black. It had nothing to do with Rooting or Flashing, because I don't even know what that is.
View 2 Replies View Relatedi just got the phone today. But when i make a phone call the whole screen turns black and doesnt respond to any buttons/touch, i can't hang up either. But the conversation is still running i can speak and hear the other person. only when the other person hangs up the screen returns back to normal.
Phone specs:
- Phone Model : A9220
- Model number : e1108_v73_jbl1flash8p4
- Android version : 4.0
- Baseband version : MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/20 18:09
- Kernel version : 2.6.35.7 Tue Apr 10 15:29:22 CST 2012
- Build number : ALPS.GB.FDD2.MP.V4.5
- Custom Built Version : 1334213021
- CPU MTK 6573 256 rom 512 ram
bought it from everbuying
I dropped my Note 2 yesterday and the screen started slowly turning blue. This morning, the screen completely got filled with blue/white/messed up color, and then went completely black. Touchscreen still worked though because I was able to maneuver around the phone right after it was dropped. Screen was not cracked. does the screen has to be replaced as well or i can replace it with smaller parts?
View 2 Replies View RelatedMy Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
I was able to flash ROM from : LNK1 but I have a problem with touchscreen which works upside down. When I press screen on top it actually shows that I pressed at bottom of screen. I was looking for solution many days and have learned a lot from many sites and different forum threads, but surprisingly non of the solution works for me. I am not able to reach proper file to change proper property to change this behavior. Most probably i need to set somewhere: ctp_revert_y_flag = 1 as described here: LNK2, but I am not able to find nor edit script.bin on my phone, here I found some info: LNK3 and also here is very interesting info about partitions: LNK4 but I can't find this script.bin on my phone.
My phone is china phone 1:1 Real MTL 6589 GT-I9500, I was able to flash several ROM's using SP Flash tool from LNK5, I know how to do this, but no matter which ROM I flash no matter which recovery image I flash this touch screen behavior is still upside down as described.
1. set ctp_revert_y_flag = 1 in script.bin on my phone - I can't mount proper partition, don't know which partition should I mount, can't find this file
2. set ctp_revert_y_flag = 1 in script.bin on ROM file before flashing - don't know where to look for this file and don't know how to edit ROM before flashing.
What I know: how to root my phone, how to get to it using adb, how to use android-sdk, how to flash using SP flash tools, how to use recovery mode, clean user data, how to use SP Flash tool, how to switch on developer mode, switch on USB debugging, switch on "show touches".
[Q] Galaxy S4 i9500 Downgrade, is there a way to downgrade Android 4.4.2 to Android 4.3 on the i9500 i need this urgently. (Stock Official Samsung Touchwiz)
View 1 Replies View RelatedI have a Galaxy S (GT-I9000M) which doesn't boot past the start-up splash screen and sound effect. Eventually it will just switch to a black/blank screen and do nothing more. The back and menu buttons still light up if tapped.
The history how I got it this way, was I was using the app web-sharing lite to transfer some files through wifi without the need of a usb cable. I was transferring a large movie file when the phone locked up. I reset the phone, and upon boot every app and service was crashing. Tried this a few times, then pulled the battery etc, still the same. Then I booted into recovery mode(vol up+home+pwr), and applied wipe data/factory reset, then rebooted. This is when it started to only boot into the black screen.
This is a Canadian phone, service/bought through bell, the phone had the one click root applied to it so TI Backup could run on the device. So I think I'm out of luck with any warranty service.
I can get into the phones recovery mode and download mode, so I think there is still hope for this phone to be recovered. What I don't know is what firmware version Bell ships with these devices, and where I can download it?
I installed ADW.Launcher today on my Galaxy S, and have ended up with a black screen. I'd like to fix it without a factory reset, if possible.Galaxy S, Android 2.1, bought in Singapore, SingTel settings but bought it unlocked. Currently in Indonesia. (Can't look up Baseband Version, Kernel Version and Build Number on the phone now for obvious reasons.)A short while after installing ADW.Launcher, the Home button became unresponsive, and a minute or two later the phone restarted itself (the way it's done by itself a handful of times since I bought the phone - without going through the whole power down and power up sequences of sounds and graphics). Then I only had a black screen with date and time at the bottom, and the menu and back buttons lit up, and now I can't get the display back. It seems to start normally, with the logos and sounds, but just returns to that black screen with date and time.
I know something's going on inside because I can swipe to unlock the screen (giving me a purely black screen). If I then press and hold Home, I get the haptic vibration that normally goes with the "recently used" menu. But if I randomly tap all over the black screen, and try to use the menu and back buttons (guessing where the menu items are) I get no response, and no haptic vibration.Holding down the power button gives me the usual power menu - I can select "Power off," but it restarts. I've removed the battery a couple of times, waited and replaced it - but no change.
At first I thought it was related to my SIM card, as it did the self-restart thing yesterday about 20 min after I got a new SIM card. But doing a google search suggests that this problem is sometimes related to launchers. And I removed the SIM card and restarted (removing battery) and it didn't help.The closest I could find to an answer to this problem was in the Droid X forum: HELP! I uninstalled launcher pro, and now have a black screen! - The solution there was to do a factory reset. I'd really rather not do that, but may not have a choice.
I just plugged into Kies and performed a Firmware update, which I assume was the Froyo update. It all ran it's course perfectly and the phone then went to reboot. Following this, it hung on the Galaxy S animated screen before simply going to a black screen (I know the phone is still on, because the two bottom corner buttons will light up if pressed).
I realise that this black screen is quite common, and that people suggest booting into recovery mode. The problem is, I've never been able to get my phone into recovery mode. I turn the phone on and hold down Power + Home + Voume Up for a couple of seconds and then let go... it does nothing, it just goes onto the Vodafone screen and then carries on booting.
I also tried holding down these buttons for a little longer, but all that it does is pushes the phone into a constant restart loop (as obviously I'm holding down the power button).
I am using GAOSP B2 and when I make try to make a call it dials out but the screen goes black and the only way to get out is to remove the battery. Strange the first call I made with this ROM was fine. Anyone else have this issue?
View 2 Replies View Relatedfirst of all let me just say that beta2 is superb i just have one problem with it whenever i'm in a call (reciving or dialing) the screen goes blank and i cant wake up the phone not the end call button and not the open (side) button the only ways i can wake it up is by getting another call or rebooting
any way to work around it? i have tryed several screen on pogs from the market but no luck there without it i would use it everyday, its much much better then galaxo.
I've had this problem in a few different apps now and I can't seem to find a solution.
If, in the onCreate() of an Activity, I start an activity that uses the dialog theme it doesn't draw anything to screen... the whole screen stays black. All the views are there (e.g., I can tap where an EditText should be and it'll give me the keyboard), they're just not visible. code...
How can i enable native video calling like international (i9300) one on my t-mobile galaxy s3? i can make video call using skype or tango. but i need the built-in feature. so is there any solution?
device: t999
4.1.1 "rooted"
How can I change Dial Pad and calling screen in S5830i ? i am using Jeelyblast_V3
View 1 Replies View RelatedI have a clone I9500. It has been bricked while I was trying to install a new rom
how shall I fix it. it has a MT6572 but recognizes as a MT65XX
some softwares says its a MT6589 AND SOME says MT6572
when I start up I keeps rebooting or gets stuck on the screen and I can acces the Boot manager
this is how is the boot manager:
Recovery
Fastboot
Normal.
it says alps.