General :: Restore IMEI Or Flash Nandroid Backup?
Dec 23, 2012
I'm having the documented problem of no data connection, always on roaming, after flashing to CM 10.1. My prior rom was CleanRom 5.1, and I have several nandroid backups from various roms over the last few months. GS3 (d2vzw) with root and unlocked bootloader.
So the question is... What's the best way to restore IMEI info and get mobile data back?
There are a couple of steps I'm not sure of:
Option 1: Flash a nandroid recovery, backup IMEI using terminal emulator, and then crack-flash away
1. If I restore my phone to a previous backup, is the correct IMEI information included?
2. Also having a problem getting the MD5 sum's to match. Should I flash through ADB instead of clockworkmod? Or use Odin to get back to stock and then re-root? If correct IMEI included with flash back to stock?
3. Assuming I restore a nandroid, the plan was to use "reboot nvbackup" in terminal emulator to save IMEI info.
4. Flash back to CM 10.1.
Option 2: Use IMEI Generator and NV Reader/Writer:
1. Based on this thread: [URL]
2. Problem: The link to the generator tool in the OP is broken (404). I can get the converted IMEI number from an alternative program, but don't know how to format the text file correctly to use with NV Reader/Writer. Any standard format of a dummy IMEI text file?
View 1 Replies
May 30, 2012
i've flash a ROM and I want to revert it back to the stock rom, Could I use the Nandroid backup to restore the stock ROM?:confu sed:
View 4 Replies
View Related
Dec 7, 2012
Prior to upgrading to 4.2.1, I made a NANDROID backup of my Nexus 7 (4.1.2) using mskip's toolkit. The restoration method copies the backup folder to the device (/sdcard/clockworkmod/backup/), then boots it into custom recovery. At first I was using TWRP 2, but I think I need to be using CWM, so I flashed CWM Touch. I actually went through the motions again of copying the backup over to the Nexus 7, but CWM Touch doesn't see the backup folder. It returns two messages when attempting to Restore:
1. Couldn't open directory
2. No files found
The folder containing the NANDROID backup and all parent folders are readable/writable/NOT Hidden, according to ES File Explorer, but I wonder about ownership.I'm rooted with SuperSU 0.99.
how to make CWM Touch, TWRP 2 or some manual method recognize and restore a NANDROID backup? I know I could just flash stock 4.1.2 and start from scratch (I have apps + data backed up), and if it comes to it.
View 3 Replies
View Related
Mar 27, 2014
I did a Nandroid backup (system, data, etc. using CWM) and a Titanium backup (user apps), wiped my phone, and installed a new ROM.
Q: Does a Nandroid backup include the /ProgramData/Language/ folder?
I'm trying to restore files I 'hid' using the Hide It Pro app. A developer blog post mentions that this folder is the 'vault location'. As a result, I'd like to find this folder and restore it if possible.
A Titanium Backup restore of the Hide It Pro app+data didn't of course work due to this. I'd like to avoid restoring everything from the Nandroid backup if possible and just restore the individual folder. I have of course tried looking through the folders and files to find it, to no avail.
View 8 Replies
View Related
Feb 9, 2014
I own the g2 vs980. I am running malladus. I had a nandroid backup of cleanrom. In an effort to free up space late last night I opened cwm app and deleted my backup if clean rom. I would like to recover it. I know of tools like diskdigger apk, but I don't know if it will recognize the format since (I believe) inside the backup file folder there are many files that comprise the nandroid backup. I did not do any factory resets since the delete. I know the files should still be there. I have done very little on the phone so the data should still be intact... for now. Xoom WiFi
View 3 Replies
View Related
Jan 18, 2014
I had upgraded my Galaxy Gio from stock rom to custom rom (CM 7.2 based), and now I want to restore just a few apps + data (for e.g. Memo) and Contacts (from stock rom) from my Nandroid backup, so I want it should be on the current custom rom.
How far I tried to do so, I could'nt get it done. I tried with NANDROID MANAGER, I installed it and tried to restore some apps + their data, (the apps was in previous rom in System/Apps so Nandroid Manager automatically wanted to install it in system/apps), ok, the program showed as it's installed with no broblems, BUT after reboot as it required, NOTHING HAPPENED, so I looked in system/apps and data/data with root explorer, those apps & data were there, but it was not installed.....
I also tried to restore the Contacts from Nandroid (Contacts Storage), and I ended up with erasing all contacts I had currently on the phone (anyway that wasn't a problem, cause i had an regular backup of it).
So I would like to understand what the problem is, and how is it possible to have my previous memos and contacts restored to my current rom?
View 4 Replies
View Related
Feb 24, 2013
Having md5 mismatch error while restoring nandroid backups. This error comes usually due to renaming the nandroid backup folders.
1. Use a program editor like notepad++ to open the nandroid.md5 file and remove all lines except the first line which would have some hex values follwed by boot.img.
2. run the following commands in terminal emulator of ur android:
#cd /sdcard/clockworkmod/backup/(name of backup)
#rm nandroid.md5
#md5sum *img > nandroid.md5
View 9 Replies
View Related
Mar 23, 2010
When you have booted into RECOVERY MODE, and you are either trying to make a Nandroid backup or restore, and you get a "Run nandroid-mobile.sh via adb!" error, then try these things: SD Card - it could be too full to write a recovery.Try deleting some things and try again. "Nandroid folder" inside your SD card -If you have renamed some of your backups, then this could also be an issue.Change the names back to what they were and try again.If anyone else has other experiences please feel free to add them here so others will have something to look at when in need.
View 4 Replies
View Related
Jul 14, 2010
IM trying to restore my latest nandroid file because i was having issues with the cm6 rom and not reading my sd card. so im trying to return to my last backup and then im going to reinstall the cm6 rom. but ive been sitting on my htc incredible load screen for some time now after rebooting with the backup. is this normal?
View 9 Replies
View Related
Sep 26, 2010
I was rooted fine with unrevoked forever. I wanted to try a ROM than required me to install the newest version of hboot so I did that. Well I didn't like that ROM so I tried to flash a nandroid restore but it didn't take. So I reinstalled the pc36img that I used when I rooted my phone. Then I rebooted my phone. Now it booted like its not rooted! I don't have superuser app and when I try to reboot into recovery I get a red triangle over a phone.
When I boot into hboot it says I have s-off but I have no idea how to get my phone back to the way it was. Under system info it says I have firmware version 2.1-update1 but I try to look for a froyo update and it says there are none available. I was going to just unroot with the s-on tool but that requires going into recovery which I can't do. What do I do toget my root back!
View 7 Replies
View Related
Aug 21, 2010
I have a nandroid backup of 2.1 with radio 1.x I have gone to unrevoked forever and updated the radio to 2.5. Will I brick my phone is I restore the 2.1 backup or will I just have 2.1 with current 2.5 radio?
View 2 Replies
View Related
Jul 11, 2010
cant nandroid restore error: run 'nandroid-mobile.sh restore' via adb!this is the error message i get every time i try to restore a new android.what is up with this?
View 5 Replies
View Related
May 11, 2013
The ROM that I use on my phone pretty much discourages dirty flashing updates [CM10.1 based]. So for the last 10 or so updates, I have clean wiped my HTC Rezound, then restored from a TitaniumBackup.
First I disabled compression of backups.
Then to restore I go to /sdcard/TitaniumBackup/ and run a bash command:
# for i in *.apk; do pm install "$i"; done
Then I go to TitaniumBackup, and every app is installed but doesn't have my data. So then I batch restore my data for my apps [Pretty much only user apps, except a few system things like SMS, WiFi networks]. But the problem is, recently, TitaniumBackup will quit halfway through a batch restore of "Data only." So I've been manually restoring data 1 by 1 for the apps that I need data to be saved across rom updates.
But then I thought, "Hey, why can't I just backup my /data/data/ folder?" but then I also thought that would probably be like a dirty flash.
View 5 Replies
View Related
Jun 13, 2010
So my Droid's screen recently stopped working and I'm getting an exchange with Verizon. I have to send my dead phone back once I get the new one, and am concerned about the fact that it's rooted running Froyo. I'd like to restore the nandroid backup I made of stock 2.1. Can somebody give me advice on how to do this with a dead screen? Perhaps from the command line on my computer via USB, or perhaps the key strokes to do it in nandroid so I can replicate it by feel?
View 7 Replies
View Related
Sep 17, 2010
I have installed UD8 for about a week now. But ever since I have flashed some kernels (slayers 1100lv, chevys 1100 lv, p31200) I have not had the stability nor the quickness that the original 800 stock kernel gave.
I made a nandroid backup b4 flashing those roms..so my question is this: Do i have to wipe cache/data before i flash my nandroid backup? Or can i just flash it w/o doing any extra steps?
View 6 Replies
View Related
Mar 29, 2013
My sisters phone was having a sim card security error and after googling i came across this thread [URL] ....
I followed the proceeders written on page 3 and the error is gone but the imei number is gone too. So i was trying to restore it but i havent had luck yet. I have already searched and tried to restore it with tutty but haven't had any luck yet. The phone is not rooted.
View 5 Replies
View Related
Aug 7, 2013
How would you backup and restore your IMEI number? I have Non-Samsung and Non-MTK device...
I have Huawei U8800 pro running on Stock GB with Snapdragon S2 SOC.
View 9 Replies
View Related
May 8, 2010
I spent most of today finalizing this guide that I've been writing for the last 2 weeks (on and off) and it's finally posted.I know rooting, custom ROMs, Nandroid, and other flashing business can be confusing, especially to beginners, so I usually try to make my guides detailed, thorough, and noob-friendly (I call it "I wish somebody showed me how to do this crap when I was getting started" series)Check it out and tell me what you think: [Complete Guide] How To Flash A Custom ROM To Your Android Phone With ROM Manager + Full Backup & Restore The other guides you may find useful from the same series: Custom ROMs For Android Explained And Why You Want Them Rooting Explained + Top 5 Benefits Of Rooting Your Android Phone [Complete Guide] How To Fully Back Up And Restore Your Android Phone Using Nandroid Backup I'm going to enjoy the rest of the sunny Saturday now.
View 3 Replies
View Related
Oct 23, 2013
I bought recently my thl W8S, and I was experiencing some troubles with the battery charging (taking 10 hours) and my GPS connection.
So I decided to flash it via CWM. But I'm very new in the flashing and all this stuff. I tried a lot of things to get CWM , even thing I didn't know.
The problem of my IMEI came out atfer I installed this : [URL] ....
The recovery installer apk, I just click on it and when my phone rebooted, I didn't have any access to my SIM management, no more coverage of course.
I tried the *#06# and my 2 IMEI are just marked as "INVALID".
Since yesterday I tried few different operations to get if fixed but nothing is working.
I tried to use the engenering mode (menu CDS, Network information) and send the AT command with the IMEI but I got an error message : AT command is failed to send.
Then I tried to recreate the MP0B_001 file with some tools I downloaded. And I put it in the right folder (/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001) instead of the old file. I reboot my phone, still the same trouble.
I can't find the stock rom to try to flash it with Odin ..
View 5 Replies
View Related
May 31, 2014
I have a GT P3100 with no baseband and IMEI, I lost EFS folder trying to flash slimkat and dont have a backup. Is there a way to repair it without a box??
View 6 Replies
View Related
Mar 30, 2012
So i have a month old nandroid that i just need one thing out of. How to get it out? I know you can browse them now. But my plan B was to restore and titanium backup just that app.
View 8 Replies
View Related
Jan 8, 2014
I lost my phone. I forgot to note down the IMEI number. However i took TWRP backup of EFS Partition. I can open the EFS partition file through winzip software in my computer and see various files (like nv_data.bin etc). I want to find out the IMEI number from the backup.
How to extract the IMEI number from my computer from the backup of EFS Partition files?
View 5 Replies
View Related
Jun 1, 2010
For some reason, and I never had this problem before, but I just tried to do a new nandroid backup and it says this: Error : Run 'nandroid-mobile.sh' via adb! What is this!
View 2 Replies
View Related
May 14, 2014
I've flashed a new rom in my Samsung Galaxy Core Duos (i8262b) but I forgot to do the f*cking IMEI Backup...My phone is giving that message of "not registered on network"..
View 9 Replies
View Related
Jul 15, 2010
Forgive me if this has been answered already, I didn't really know how to search for this... But today I tried to do a Nandroid Backup and when I did it said "error: Run 'nandroid-mobile.sh' via adb!" But I've previously been able to just click Nandroid Backup and it will backup my phone..
View 13 Replies
View Related
Jul 27, 2012
with the latest versions of Titanium Backup, I can't seem to figure out how to do batch backup and restore of apps and data anymore.
View 3 Replies
View Related
Apr 25, 2013
I have CWM Touch Recovery v6.0.3.1. A couple of hours ago, I made a NANDroid backup before flashin a new ROM. When I attempted to use NANDroid backup manager to restore my apps and data, the app said I had no apps in the backup. Upon reviewing the files CWM created, I discovered that it created several data.ext4.tar files. Is there a way to combine these so I can use the Nandroid backup manager to restore my apps. I've managed to restore call logs, text messages and wifi data but my apps are important too.
I do realize I could probably use CWM for restoring but I want to restore specific apps and not the data. (I.e the recently updated hotmail app) Plus, restoring with CWM flashes data that is incompatible with the new ROM.
View 4 Replies
View Related
Apr 20, 2013
i have an ATT galaxy S3, and I just finished a nandroid backup. However, CWM Recovery is now giving me the option to restore the ROM I just backed up (which is a stock ROM, its my first time) or just reboot. All I want is to return to my Stock Rom and continue using my phone.
View 1 Replies
View Related
Apr 20, 2012
I just came across my first downfall with moving the dalvik to SD. Nandroid is stuck trying to backup cache. Im guessing the reason is that nandroid cant find the dalvik because it is not symbollically linked by S2e since we arent booted into the actaul OS. Anyway i can get nandroid to backup without moving it back?
View 5 Replies
View Related
Oct 26, 2012
I forgot to backup my SMS and contacts before I flashed a new ROM. Can I get the files off the nandroid I saved on my PC and move them where they need to go using a file manager like ES?
I went from ARHD to AOKP jb
View 2 Replies
View Related
