I use MySms to get sms and send them from my tablet. I was using Miui on my phone before and it worked good but then I flashed AOKP on my phone and now I don't get messages to my tablet.
View 1 Replies
Rom Manager tells me "Goophone i5 does not have an officially supported ClockworkMod Recovery yet. Have you installed a ClockWorkMod recovery manually?"... If I say Yes it asks me to confirm Version 2.x or 3.x+. I don't know if a CWM was installed manually. What should I do?
I can't see a recovery file on the SD card.
I was wondering if i can flash kyapat10mod3 using sgs kernel flasher on my SC-02B (SC02BOMLL1)? is it possible? I don't want to brick my phone.
View 1 Replies View Related I'm interested in this so-called ICS ROM [URL] .... which people say that it's just a theme and wanna install it on my Galaxy Ace.
In the thread he says : " -Do a 3x wipe dalvik cache - Flash normally through CWM "
i have a ZTE (kis lite v790)..I've found ROMs for it but they are from other providers. the signed update.zip checks if your phone is from the right provider and exits if it doesn't match. All the rooting attempts on my phone have failed and if i edit the update.zipMETA-INFcomgoogleandroidupdater-script it fails the signature check.how on earth am i supposed to update my phone?
View 1 Replies View RelatedI would like to know the steps & software on how to flash a ROM (Like a Garmin) into my current GPS Deivces?
View 1 Replies View RelatedI always have a problem when I want to flash a rom using cwm, yesterday, I tried to flash Jellaxy AOKP rom on my galaxy ace, but I had an error message saying: "can't flash rom.zip (bad)". Thought that the zip file was corrupted, so I tried to flash another rom: beats with smooth sense 6, the same problem occured. (Tried deleting clockworkmod floder from sd card).
My galaxy Ace is running under CM 7.2 with cwm recovery 5.0.2.6 . baseband:S5830XWKPA. kernel :the one that comes with cm.
Does flashing the ROM, removes the CWM ? Is CWM and ROM are inter related ? I'm using Xperia P and I installed CWM after alots of googling. Now planning to install MIUI in my Xperia P.
View 2 Replies View RelatedI have tried to modify my rom on MTK6589 device but on CWM flashing it says Error, STATUS 0. I have tried edify and amend scripts but still no luck.
Here is my updater-script:
show_progress(0.1, 0);
format("ext4", "EMMC", "/dev/block/mmcblk0p5", "0", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p5", "/system");
package_extract_dir("system", "/system");
symlink("dumpstate", "/system/bin/dumpcrash");
[Code] .......
Ive been learning to build roms and ive created a few of my own but im tired of taking up so much space on my phone and flashing multiple roms. I want to know if there is an Android ROM Emulator that i can run on windows 7 to test the rom before i flash it,
View 1 Replies View RelatedIve been building a rom and adding tweaks and apps ive noticed after I flash my rom I need to fix permissions to get some rhings working is there a way to do this wile im builing my rom? Do I have to do it manully or is there a program that can do it for me ?
View 5 Replies View RelatedI want to flash the new slimrom onto my I9505. It goes from android 4.2.2(stock rom) to android 4.3 (slimbean).Do i have to change my kernel when doing so?
View 1 Replies View RelatedIs it possible to flash a zip Rom using Odin? I need to flash a zip. HTC Explorer A310e
View 9 Replies View RelatedIts been on the download screen for maybe five minutes or so. How do I know when I'm stuck? I don't want to interfere with it by pulling the battery if it just happens to take a while.
View 1 Replies View RelatedI bought a Verizon LG Lucid 4G and I would like to flash it to Page Plus. I have DFS CDMA Tool Demo version and QPST.
How do I get my Lucid into Diagnostic Mode??? I believe I know all the step to flash my phone, but I can't seem to get my phone into Diag Mode. What code do I need to do so??
What are the steps to flashing my phone over to PP using DFS Demo or QPST?
I followed the steps this guy took to flash his HTC Thunderbolt 4G over to PP, but it's not working for me, probably because I'm not in Diag Mode. The guy used CDMA Workshop, but I did the same steps using DFS. Anything I change and write to the phone never saves after I restart the phone. URL..I want to flash my phone without having to pay for any software, if at all possible.
I tried flashing my own stripped runnymede, get this error in cwm, "error status 7 (expects 4args, got 3)".
View 1 Replies View RelatedCan i install kernel after flashing my new rom?.I mean i flashed my rom and can i now update my kernel without flashing rom again.
View 1 Replies View RelatedI just flashed my rom on my prestigio 4020 . Rom is running well, but camera isn't working.I got stock rom files.How i can fix that camera problem?!? On stock rom camera worked well.Can i transfer camera file (etc.) on this my new rom?
View 9 Replies View Relatedi have clockwork mod recovery v6.0.1.0 and tried to flash Paranoid android 3.6 and then 3.57 both after wiping.
the screen says: Installing.....zip.
Finding update package
opening update pakcge installing update
assert failed: getprop ("ro.product.device")=="grouper" || getprop("ro.build.product")==grouper"
E:Error in ....(blah blah).zip
(status 7)
Installatio aborted.
when I finally achieved root I attempted to flash hensemod 6 and got stuck at recovery. After lots of searching I found the metro RUU and installed it. This allowed me to use my phone again but I no longer had access to the data network. I have is the fact that I have no apns-conf file.
View 4 Replies View RelatedI have LK bootloader source code which I need to build and flash to a Nexus 5 device.
* I got the source code from the Code Aurora website
* I made a guess which branch is the stable branch I need, because I found no mention of it anywhere (I took "kk_2.7-stable", where kk means kitkat)
* On a Debian 7 stable machine, I installed a GCC cross compiler from Deb packages built using Emdebian tools
* I made a guess which target to compile, because the exact chip name didn't have its own: I use msm8960
* I created some symlinks to the cross-building tools because the makefile and the debian cross-building tool names are different
* I ran 'make msm8960' and the build was successful (I also tried earlier with NDK prebuilt GCC but it failed)
* I got a bunch of files with no idea what to do with them
* I attached the device to the computer and re-flashed the stock bootloader to make sure it works
* I checked the fastboot screen: Bootloader unlocked, secure boot is on
* I tried flashing the 'lk' binary file I got from the build process, but fastboot says:
sending 'bootloader' (1702 KB)...
OKAY [ 0.239s]
writing 'bootloader'...
FAILED (remote: invalid bootloader image
)
The size of the file is much smaller than the size of the stock bootloader, but I don't know if it matters or what exactly I need to flash. I did a lot of web search, including here on XDA, but found no evidence of struggling with flashing the bootloader.
How do I flash the bootloader after I build it?
you see apps on xda.. that are required to be flashed.. and are in the form of zip files. Now how are these different from apk files with their regular installation? is it something to do with giving these apps you flash a deeper level permission? if so.. if your rooted can't you just give those apps those permissions after a normal install?
View 7 Replies View RelatedI flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
View 1 Replies View RelatedI hear that some kernals are better than others and I assumed they change when you change your ROM but I'm not sure. I feel like I would have better battery life with a better kernel.
View 1 Replies View Relatedflash stock rom on micromax bolt A67. Where i can find flashing tools and driver that supports on windows 8. How could i flash the stock rom.
View 2 Replies View RelatedI have just flashed to radio 12.65.60.29_26.14.04.28_M for the Android Revolution rom (Latest)
When I boot into bootloader, it is still showing as the previous radio (26.03.02.26_M)
I have xtouch X1 with MT6589 SoC. have lost my IMEI while flashing a Rom i have tried many different methods but none has worked and in baseband version it says unknown and whenever i try to type in IMEI via engineering menu it says can't send AT command and i have flashed back to my stock rom via SP Flash Tools but even that didn't work, I have tried terminal emulator method MTK Droid tools method but none has worked even tried to replace the file of IMEI one but still same.
View 1 Replies View RelatedI just bought an android google tv from dealextreme. It has the Jellybean 4.2.2 and I was thinking if i add a custom rom or something it will make it run fast. There is issues on the 1080p streaming also for me.
View 1 Replies View Relatedmy SE Xperia Pro .I was flashing it to CM10 , flashed the core but that was the last thing done successfully. Clock work Mod recovery didn't launch , so firmware even didn't started to install. Now by switching it on I just get nice picture "xperia free project" and depressing dark after it. I cant launch recovery, SEUS at the first time stopped working very quickly, the second time said that there is modified software there, and thirdly ,at last, didn't recognize my phone at all. Can i do something with it, excepting using it like a brick?
View 1 Replies View RelatedI own a Motorola defy with green lens.
I upgraded to cyanogenmod9 and everything is working super well.
The only one problem is that when I enter to the "manage apps", it shows that in general I have 140mb of internal space, which is impossible, and 100mb of it is already used.
What can I do to return the lost 1.5gb internal space?