General :: Motoluxe Black Screen After Using Provision Optimizer?
Oct 22, 2012
I know i should have made tons of Backups before trying out something like "Provision Optimizer [Root] but i didn't do any Backups. After i clicked the "one click optimize" button, i rebooted my phone to apply the settings. The Motorola Boot Logo showed up, but instead of loading/showing the animated Motorola Boot Logo(the second one) the Screen turned black. After waiting one or two more minutes I tried to touch the Screen and the Motoluxe responds as if the Screen was turned on. Even the sounds and vibrations match the Touch screen unlocking.
Technical Details:
Motorola Motoluxe
Android 2.3.7
Fw: IRM-1670-0-4073-A02_BFM_service.sbf (stock)
Rooted
Usb Debugging enabled
How can I backup either my Data to flash the Motoluxe once again (Titanium Backup installed) or undo the changes, that the "Provision Optimizer" did to my system?
View 2 Replies
May 3, 2012
here I got to recover from the recovery.img motoluxe I wanted to be able to modify a custom recovery.
View 4 Replies
View Related
Nov 24, 2012
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
View 6 Replies
View Related
Dec 4, 2013
I rooted my Motorola Motoluxe (XT615) and i've now started on removing all the yucky, yucky bloatware. So i've came across an app labelled "Terms of Service" (com.motorola.setup.tos) and is it safe to remove?
View 1 Replies
View Related
Apr 28, 2013
I have rooted Motorola Motoluxe XT389 but I cant enter in its Recovey Mode.
I tried every combination but phone just turn on in its normal way.
View 2 Replies
View Related
Nov 4, 2010
Running a rooted Evo (obviously) with OMJ 3.8. I have Sense running with Itching Thumb(which I love).
For about a month or so I have been using Autokiller Memory Optimizer which has improved me phone's performance (I determined this in a sisde by side comparison with my wife's unrooted evo. I know this is not a perfect test, but as OMJ uses a stock kernel it's close enough, IMHO)
Since I have been running Itching Thumb I have notices when switching apps Sense will occasionally get killed. I can only assume this is because of Autokiller.
When I looked on Autokiller Sense had an oom of 8, which with a memory use of 9mb and change makes it a candidate for being killed, I would assume. The oom for sense seems to bounce around a bit, it's usually 8, but I have seen 4 and 1 also.
This is a mild annoyance, waiting for Sense to restart, but if I could avoid it I'd like to. I've thought of a few possible fixes I would prefer not to do, which include:
Uninstalling Itching Thumb
Lowering the free memory threshhold on Autokiller
Temporarily lowering Sense's oom in Autokiller
What can I do to keep Sense from being killed? (I considered a bulletproof vest, but they didn't have one that fit) Can I lower it's oom? Any ideas? Or should I just suck it up and accept it and a byproduct of my tinkering?
View 7 Replies
View Related
Aug 13, 2013
My HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
View 1 Replies
View Related
Aug 9, 2011
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
View 5 Replies
View Related
Apr 22, 2013
I Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
View 9 Replies
View Related
Oct 8, 2013
My Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
View 3 Replies
View Related
Feb 28, 2013
I have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
View 2 Replies
View Related
Feb 5, 2014
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
My tab Configuration:
Duocore M7200 7inch, 1.2GHz, 512MB DDR3
View 9 Replies
View Related
Jun 29, 2013
Samsung S3 Black-screen on startup?
View 2 Replies
View Related
Jan 11, 2014
I'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
View 4 Replies
View Related
Nov 2, 2012
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
Phone:Xperia Arc S LTI8i
View 4 Replies
View Related
Mar 28, 2013
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
View 9 Replies
View Related
May 27, 2012
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
View 5 Replies
View Related
Dec 2, 2013
I have an issue with the chrome browser starting with a completely black screen. At first I thought it was only my last phone (RAZR HD), but the problem is also present on my Verizon Note 3. If it were just an issue on a single phone, I'd probably ask in specific phone forums, but it's happened on two different phones now.
I'm presuming that the problem might be caused by an app I'm using, but the problem is intermittent so I can't tell if the issue subsides when I uninstall certain apps.
View 4 Replies
View Related
Feb 11, 2013
I am trying to open fastboot screen in my arnova 7g3 tablet i pressed reset button and also pressed power button simultaneously but its showing black screen what should i do my tablet is rooted by superuser
View 1 Replies
View Related
Sep 6, 2013
1) How can I make my phone not turning on the screen when it is locked and i get an sms (via the built it messages app), but light the led light with a custom color (and of course, play a tone). I've tried "LightFlow" but it didn't work, the screen has still gone on when I got an sms.Mention that with 3rd party apps (e.g. whatsapp and wunderlist) the thing works great, the screen is black, the led is on, and the air molecules near the speaker start oscillating harmonically.
2) I know that even without any sdk manipulation, my phone still lets me move some downloaded apps to the sd. I had downloaded a 1.5 GB game and kept in mind that I use 3.5 GB of my internal storage. Luckily enough, this game is movable. I moved it to the sd card, and after the process had been done, I checked how much storage I use on my internal storage - 3.5 GB.The button changed to "Move to device storage" but it seemed that the game had not transfered at all.Mention that I tried the "adb shell pm setinstalllocation 2" thing, and it didn't fix it, so I reversed the process with the "adb shell pm setinstalllocation 0" command.
View 1 Replies
View Related
May 5, 2014
I try to install new rom (fixed rom) on thl t11.
After i go in recovery mode i go in button "wipe all data" and after " yes - wipe data for all users"
Now when i turn on my mobile (power button) i get only black screen,nothing alse.
My phone is not rooted,now i can't acces to recovery mode.
View 1 Replies
View Related
Jan 16, 2013
Anytime i am done using my phone it stays on unless i black it out by hitting the power button. shouldn't it do this automatically? If i get a text in the middle of the night it stays lit up killing my battery, how do i stop this?
View 1 Replies
View Related
Nov 24, 2012
I dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
View 1 Replies
View Related
Dec 15, 2013
I recently bought Minecraft, downloaded Angry Birds Go and Injustice Gods Among Us on My Xperia E!
All the above when I start them they only show black screen with sound, I can click on things but no picture.
When Running Injustice Phone says, app is not responding , Wait or Close!
Injustce comes up with loading screen and the superman screen but after that it is a black screen!
I have tried rebooting, reinstalling, clearing all sorts and my phone is upto date!
I am also Running V6 Supercharger wich is awsome and makes my phone lag free!
Just once Minecraft started to work, when I deleted both folders in games > minecraft (On the SD Card).
View 1 Replies
View Related
Apr 27, 2012
So I was trying out the CM7 for xperia arc by the freexperia team. It was epic. so i also tried the CM9 release by them..
-> I downloaded the CM9 anzu for my arc S
-> Extracted the files
-> Used fastboot to flash boot.img
-> And then: fastboot reboot
Instead of the FreeXperia splash screen welcoming me.. i was given a black screen.. The phone does turn on.. but then there is nothing. No splash screens. nothing.
Is there anyway to boot straight into CWM?? recovery?? Did i brick my phone for good?
View 2 Replies
View Related
Apr 6, 2014
I'm trying to make my own boot animation (A simple android kitkat logo), but when I put it in /system/media/bootanimation.zip and reboot the phone, it goes to black screen.
I followed the steps described in that guide and read that post, but they didn't share the solution and the mediafire link is dead. I'm attaching my current bootanimation.zip
View 5 Replies
View Related
Dec 28, 2013
Today when I'm was coming out of gym my phone just fell to the floor. The battery disassembled but it seemed not a big problem.
When I tried to switch it on, the screen became black, but i noticed that the screen turns on because it is not complete black, i noticed a bit of light change. And the most amazing is that I can ear the sound of the music of boot, and the tactile buttons are also with light.
Maybe I can't solve it at home because i would need to dissasemble it but I look for my guarantee and that's in time, the problem is that the phone is rooted, and with rom enhance 236, and this broke my guarantee, can install stock rom just using usb cable?
View 3 Replies
View Related
Aug 3, 2012
Recently my phone feel so slugish and the mp3's are not playing on any music app. Ive searched through the internet that if i do a hard reset and clean dalvik cache that should fix it. But when i done that something went wrong with my android phone. It boots with no problem but when the boot finishes the screen just go black. I know it is booted cause it vibrates when i press the buttons(haptic feedback) but its just black screen. Im using mt6516 android platform phone. Cherry Mobile Candy to be exact.
View 9 Replies
View Related
Jan 18, 2014
I recently bought a Chinese Mediatek 'pbablet' phone/tablet combination; running Android 4.2.2 Model: MTK6572. Due to it being cheap, it was ideal so I thought, for flashing and development, however I maybe wrong.
However I cannot get it into recovery mode. It won't display the menu when holding down volume + and the power button when powering on.
When pressing these two buttons together on start-up, it actually remains a black screen, and it won't turn on after doing this, and I have to keep pressing the tiny reset button on the side of this device every time I attempt to enter recovery, to get it to turn on as normal again.
Pressing and holding volume - and power at the same time on start-up brings up "Factory mode" (in Chinese) and has no options available for flashing/ROM/ functions, except 'testing' the devices' hardware. This phone doesn't have any other physical buttons except power, volume + and -
I am able to successfully enter CWR by flashing it with MTKDroidTools and rebooting into the recovery mode (while powered up and in the android OS) however I still cannot get into CWR or any recovery mode at all while powering up with power and volume +
I just want to be able to enter a recovery mode on this device, to ensure no future issues and doubts upon the unfortunate events of a permanent brick. My idea is to flash this phablet with ParanoidAndroid; or cyanogenmod, and I could try doing this with a software reset, but then what if the ROM is incompatible, and totally bricks it? Then I have no way in hell to revive and reflash, because I can't access the recovery mode anyway.
I have came to the conclusion that it maybe due to the filesystem, potentially due to it's fbifs, that is the cause to no recovery mode, but what if it's ext4, does any of this make a difference.
Is there any way to make this device open the recovery menu while powering it on?
When I attempt to enter recovery mode while powering up with volume +, the device is basically a brick, until I press reset. It doesn't respond at all. The only way to enter recovery menu is by booting into android resetting the device into recovery mode via an app.
Device Info -
Hardware : MT6572
Model : MT6572
Build number : ALPS.JB3.MP.V2.0
Build date UTC : 20131104-123514
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/09/18 03:24
Kernel v : 3.4.5 (breaze@urbetter-Linux6) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #10 SMP Thu Dec 19 09:40:47 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hsd070idw1
Scatter eMMC -
[Code] ......
View 6 Replies
View Related
Mar 28, 2013
It is two days now that my GS2 (stock 4.1.2, PhilZ latest kernel + some bloatware removal and little ROM integrations, like androidlost: nothing recent, anyway) after being turned off all night long, boots up to the home: it responds for half a minute than freezes for a minute or two; then soft-reboots and then go all ok.If I turn it off and on, I have no problems: this only happens at first boot in the morning.
I'm not sure, but it also seems that if I let it boot the first time without touching anything, after the screen goes black the autoreboot does not trigger.
View 1 Replies
View Related
