Installed a devil kernel without wiping the previous kernel (semaphore)now my phone is stuck on the turning on screen (the one with the GALAXY S symbole in white)and when i enter the recovery mode i cant wipe data/factory reset it says cant mount E: and stuff like that.
View 3 Replies
I installed a kernel which is not compatible with my phone. Now it stuck. I cannot turn on my phone. I tried everything on that is written on the forum. I tried volume key tricks everything. Non of them worked.
View 5 Replies View RelatedFinally did the 2.2 root (whew!) but i totally forgot to choose a ROM so i'm stuck now lol. Fresh seems to be easily updated and has workign wimax from what i read but it also is still capped at 30fps. just wondering if i can install an uncapped kernel later on or if it all has to be done at the same time.
View 19 Replies View RelatedSo, I've just installed the two Hyra kernels and after checking the "about phone" section, I see the undervolt kernel has been installed. Now I've got a couple of questions.. 1. How do I know the overclock kernel was also installed? 2. Are there any settings or anything I need to turn the kernel "on" or is it automatic?
View 3 Replies View RelatedI did unrEVOked 3.21 and applied OMJ's 2.2 netarchy kernel ROM. I am not sure what my battery life was at this point but I was now on 2.2 after using eclair 2.1 for so long. I wanted to go to the new stock kernel so reupdated to OMJ's stock kernel 2.2 ROM. I also added back the Sprint TV Widget. Ever since, I have noticed a major drop in battery life. I usually get 30-40 hours on a single charge. Now I'm down to about 10. It is REALLY screwed up. I have CWM backups of all of the phases, including my 2.1 ROM. I might experiment rolling back if nobody else has any better ideas on how to debug?
I am using ATK but I make ATK kill itself so it is only there to help me kill procs. I noticed QIK and FRING seem to run all the time now whereas they didn't before I updated them. Not sure if that is related. TOP app shows me nothing special but system_server taking up most of the CPU like maybe 6% peaking while idling. Otherwise I just can't figure it out!! I used to be the one bragging about how awesome my battery has been (running original OTA1 which let me still use unrEVOked 1.0 to get simple root all this time). I am finally on 2.2 and I'm disappointed with battery life now. WiFi is WAY better but that is about it. My Nexus One does not suffer from 2.2 battery blues.
Okay, if I buy/install both of these with plans of OCing (using Stock kernel now)
what issues will they cause if installed with the Stock Kernel?
EDIT: Oh yeah, with TempMonitor work with AdamZ 5 slot Kernels?
My problem is that my phone is not booting, it's just loading.. So i need to reflash my phone again but i'm not sure on how to proceed. I had ICS and an custom room, im not sure which 1 but if it's important i can find it out.
View 1 Replies View RelatedI have u8800 and 3.0.8 AOSP kernel. But not runnig cm9 with AOSP kernel. How to port aosp kernel to cm9 kernel.
View 1 Replies View RelatedI am in a development team which develops an app used by millions of users worldwide. We get mysterious crash log messages all the time which happens only a couple dozen or even less devices which we can not directly reproduce while the vast majority of the users can use those features without problem. We suspect that in some of these cases some custom ROM or custom kernel causes the problem. Currently we get these informations from the hardware/software environment (in the parentheses there are examples from an actual crash log):
- Android version (4.0.4)
- Board version (SPH-D710)
- Brand (Samsung)
- System build number (IMM76I.FH13)
- System build ID (IMM76I)
I have a Nexus S with ParanoidAndroid, and on the About Phone page there are the extra fields I speak about (for example CyanogenMod version, ParanoidAndroid version, kernel version). My question is that is there an universal way to extract all or some of this information which could work on any device?
I am trying to update kernel fot HTC phone from 3.0.16 to 3.0.61 , as far as i know the theoretical procedure should be:
1) revert 3.0.16 to 3.0.0
2) update 3.0.0 to 3.0.61
and compile
my problem is wen i try to revert the patch with:
Code:
patch -i /pathtopatch/patch-3.0.16 -R -p1 --dry-run
it give me:
Code:
....
patching file drivers/tty/serial/pch_uart.c
patching file drivers/tty/serial/pxa.c
patching file drivers/tty/serial/serial_core.c
patching file drivers/hid/hid-core.c
Hunk #1 FAILED at 1340.
1 out of 4 hunks FAILED -- saving rejects to file drivers/hid/hid-core.c.rej
....
and
Code:
............
patching file drivers/usb/class/cdc-acm.c
patching file drivers/usb/class/usbtmc.c
patching file drivers/usb/core/config.c
patching file drivers/usb/core/devio.c
Unreversed patch detected! Ignore -R? [n] y
........
i think it is because HTC patch those files before. What those two fail messages means? and what is the right procedure to update kernel
I'm trying to make a custom kernel for the Samsung Gravity SMART using sources from the unofficial CM9 port for the Gio/Ace (which both use very similar hardware to the Gravity Smart). What I've succeeded at so far:
1) Acquiring the source, both for the CM9 kernel and for the stock Froyo kernel
2) Searching for the device-dependent references in the stock kernel
3) Porting those changes over to the CM9 kernel
4) Getting everything to actually compile
5) Acquiring the stock CM7.2 source
6) Creating device makefiles (i.e. BoardConfig.mk, etc)
7) Building CM7.2 using kernel built in step #4
8) Putting the various img files into an Odin-compatible .tar.md5
9) Actually flashing to the phone.
And for all that work, I got.. a soft-bricked phone (fortunately, I have an Odin file for stock firmware). The phone boots to a SAMSUNG logo (not flashing/throbbing). how the heck do I figure out what's actually failing? Is there a bootloader to unlock, and if so how do I unlock it?
I got a rooted phone. how do i remove a kernel from my phone without flashing another rom?
View 9 Replies View RelatedHow to change kernel version name from about phone. I am currently on kitkat ROM. I want to change the name.
View 2 Replies View RelatedI recently started experimenting with the Android kernel. I downloaded the 3.0.31 kernel (because I wasn't able to find the sources for my stock one: 3.0.31-889555) and built a kernel image (zImage) successfully.
I plan to use Heimdall github.com/Benjamin-Dobell/Heimdall to flash the kernel image on my phone (Samsung Galaxy S2 GT-I9100) but before I do this I would like to download the current kernel image from my phone.
Since heimdall is capable to flash the current kernel image, I guess it's also capable of downloading the current, is it?
i have xolo q600 mobile which was unable to use !! i switched on the power key after that xolo animation loading and no response still loading animation of xolo. if i flash a stock rom it will load ?
View 3 Replies View RelatedI'm trying to develop an OC'd kernel for Pantech vega racer 2 phone. It has the same hardware as HTC Evita.
I was able to overckock it using zarboz' and rohan's work. But the frequence is drops down to stock 1.5 Ghz while the processor is on max load.
For example, I started SetCPU stress test and after few minutes checked max freq. It was dropped down to stock 1.5 Ghz.
The same with Antutu bench. Even with OCing up to 2 Ghz in final resulst it show 1512 Mhz and freqs are dropped down.
Due to the lack of development for this phone, I can't find any examples of OC code especially for this phone.
I have problem with my phone galaxy s2 g ( GT-I9100g ) Running ICS official rom , not rooted. its start show up before 3 months ago when i loading more than app in the same time its says "user panic upload mode"
i have to remove the battery and re-back it . i dont know why but, its very noisy
i can bypass the activation screen and see the android app is pre-installed on my phone. but how do i run it? i cant get to the home screen just into settings.
View 8 Replies View RelatedI have a new phone, that came with android 5.1 (Ice cream sandwich) and it came with a trial of plants vs zombies. I enjoyed the trial and tried to upgrade, and it just gave me a network error. So I went to the google play app store, and bought the full version there. But now I have two copies installed, one that is still the trial, and one that is the full version. How I can remove the trial version from my phone?
View 4 Replies View RelatedI'm currently running Cyda's Stock+ ROM on my Ascend G300. I installed this Volume+ and set the incall volume steps to 100 and rebooted and now my phone won't boot and is stuck in the booting animation. [URL]
View 1 Replies View RelatedI am very new to this rooting process of Android but I figured Cyanogen seemed simple enough, but I managed to screw it up. The phone boots up to TWRP 2.3.3.1 but the phone has no OS installed so I don't know what to do.
View 2 Replies View RelatedI've attempted to flash a newer version of cyanogenmod on my phone (10.1.3 to 11). I'm using TWRP 2.6.1.0. I can not boot because I've wiped the phone (dalvik, system, data, internal storage, cache), and I suspect the ROM I have is corrupted but I can't connect it to my computer and transfer the file via USB because I have no ROM installed and can not boot. I also can't take the SD card (since there's non) and put the file that way. My phone is Oppo find 5
My root file flashing was successful, but installation of the ROM cm-11-20140204-NIGHTLY has failed. I assume the file was corrupted, but I have no way to find out what it is. I now realize my mistakes, like wiping the system unnecessarily.Is there any way to get another file on the device?
what's the highest number of apps that can be installed on one phone or tablet?(Android device, of couse )
View 2 Replies View RelatedI have a rooted Acer Liquid MT and I want to know if I can get other phone launchers installed onto my phone, for example the Samsung Galaxy S2 default launcher installed on my phone.
View 1 Replies View RelatedI want to display a fancy 'loading' image at my app's startup time.
The problem: my startup code is mostly GUI related, hence needs to run on UI thread.
Is there a way to do both - that is run UI-related code on UI thread while an image is displayed to the user?
Does anybody know if the new desktop kernel patch written by Mike Galbraith can be applied or modified to be used in the android kernel?
Tiny Linux Kernel Patch Delivers Huge Speed Boost - PCWorld Business Center
I haven't messed around with android kernels yet, but I have applied it to my current Ubuntu 10.10 system and you can see the difference. Its like night & day!
I have vanilla linux kernel version 2.6.27. I want to apply android specific patches and convert it to android linux kernel 2.6.27. Where can a user find the patches to convert a normal vanilla kernel into android kernel?
View 1 Replies View Relatedwhere I have got right now on my phone, which is:
1. I updated to stock 2.1 using the sprint update tool.
2. I followed the video tutorial to root the phone
3. then i used joey's page (http://www.joeyconway.com/sdx/custom/index.php) to install the his kernel (joeykrim-SDX-kernel v2.0.4 (includes root)).
I have done nothing else to the phone but this and removing a couple of bloatware apps (i checked the list of permitted deletions before i removed anything.) I have not installed a new recovery..at least i dont think that I did as part of one of the other operations I performed (as an aside, i am not really sure what the custom recovery is or what it is used for, so i didnt install it...i guess i need to read up more...)
So that is where I am..but i have a couple of questions.
1) i am now having issues with my wifi connection - the signal reception is very spotty in areas where i should have atleast 2 bars of reception, and the wifi often cuts out completely....Is there any know corellation between joey's kernel and this wifi issue? I have searched the forums and have found nothing that answers this.
2) Is there an easy way to get back to the stock kernel? I have read that i can get back to stock everything by using the sprint download center where I did my original 2.1 update. But is there a way to get back to just the stock kernel without wiping the phone?
First and for most I just want to say, I love my Driod Incredible. Its lighting fast and puts my friends iPhone to shame every time he want to have a web page loading contest lol. But as of last night, my phone has been acting really awful and strange. I updated a few apps that I use and then tried to go into "handcent SMS" and it would force close every time and wouldn't open at all. I try to click my "phone button" to dial a number and it just says "Loading" forever and I get the same "Loading" screen with my contacts. I have no idea what to do and would really appreciate any help I can get.
View 11 Replies View RelatedIn my app I am downloading images from a remote server and putting it into a gallery and displaying it. The problem is that when i do it on the emulator it works absolutely fine but when i do it on the phone few of the images come and a few are null. I tried many ways but I am not able to find the perfect way. The images on my server are of 50 kb max. But still some are downloaded and rest are not. it would be really great if someone could help me asap coz i need to make this app live by this weekend.
Here is the code snippet to download the images from the server.
CODE:.........
Also is there any other way of loading the images in a seperate thread like it happens in the android market.