Okay, if I buy/install both of these with plans of OCing (using Stock kernel now)
what issues will they cause if installed with the Stock Kernel?
EDIT: Oh yeah, with TempMonitor work with AdamZ 5 slot Kernels?
View 9 Replies
I downloaded and installed Bekit's 1GHz kernel and by default on SetCPU it shows it running at 1000MHz and such.But when I open SetCPU, it shows the bar maxed out at 528MHz with the Min at 245Mhz. And if I try and change it, it reverts the cpu back to 528MHz.I'm going to try another kernel (I checked to make sure I was in fact running Bekit's 1GHz kernel in the about phone), but can anyone explain this?long bench was 762ms, so I'm apt to think it's something with the display and that I am in fact overclocking correctly, yes? UPDATE: Sorry all I just uninstalled and reinstalled SetCPU and this corrected the discrepancy.
View 4 Replies View RelatedI'm wondering how high to jack up setcpu
View 1 Replies View RelatedIn any of the new 2.2 ROMs is there any way to get TempMonitor and/or SetCPU to read from the CPU temperature sensor yet?
Flash tends to make the phone pretty warm and I'd really like to know how hot the CPU is getting. A failsafe profile in SetCPU is essentially useless if it can't read the CPU temp sensor.
Right now Im on stock 2.1 rooted. A few little issues I had with other ROMs and overclocking are totally gone which is great. I would like to try some different kernels, however, to see if it was the ROM or just the kernels I was using.
Anyways, how do I get back to the stock kernel if I change to a different one? If I have a recent nandroid, can I just restore one of the partitions? I would like to retain all of my data throughout the process so Id like to avoid doing a full nandroid restore if possible should I have problems and just restore the kernel.
Thanks
Does anyone know where I can find an update.zip to revert back to the stock kernel? I have suddenly found myself in a boot-loop for no apparent reason. I have been running NexBeast 0.9 for a few days without issue and today my phone ran out of battery. When I set it on my home dock it turned on, but it is just in a continuous boot loop right now. Sometimes it gets to the lock screen, other times it doesnt even get that far, before going back to the "Droid" text logo and then then red eye boot animation again.
To top it off, it looks like there is something wrong with the micro-USB port on my droid...it is VERY touchy and I cant even get it to connect to my laptop anymore so that I can get into an ADB shell
Assuming I keep CPU speeds the same as stock, is a low voltage kernel going to save my battery life significantly?
View 6 Replies View RelatedI had bought an X off craigslist where the guy had updated to the leaked 2.2 build. i wanted to go back to stock 2.1 and i want to confirm i was successful. i was in the infinite boot loop by the way.
Anyways, here are my stats:
System version: Version.1.13.604.MB810.Verizon.en.US
firmware: 2.1-update1
baseband: BP_C_01.09.04P
Kernel: 2.6.29 w30471@il93lnxdroid08 #1
Build number: VZW
ERI version: 5
PRL version: 51926
So am i bone stock or did i mess something up?
I had Frozen yogart installed, tried to install a theme and now it wont start and it wont boot into Clockwork, its going into stock recovery.
View 10 Replies View RelatedI just installed the setCPU app. What is the max yours will reach? Mine will only do 710 on the sensable 3.1 rom. Is there something I'm missing?
View 49 Replies View Relatedwhere I have got right now on my phone, which is:
1. I updated to stock 2.1 using the sprint update tool.
2. I followed the video tutorial to root the phone
3. then i used joey's page (http://www.joeyconway.com/sdx/custom/index.php) to install the his kernel (joeykrim-SDX-kernel v2.0.4 (includes root)).
I have done nothing else to the phone but this and removing a couple of bloatware apps (i checked the list of permitted deletions before i removed anything.) I have not installed a new recovery..at least i dont think that I did as part of one of the other operations I performed (as an aside, i am not really sure what the custom recovery is or what it is used for, so i didnt install it...i guess i need to read up more...)
So that is where I am..but i have a couple of questions.
1) i am now having issues with my wifi connection - the signal reception is very spotty in areas where i should have atleast 2 bars of reception, and the wifi often cuts out completely....Is there any know corellation between joey's kernel and this wifi issue? I have searched the forums and have found nothing that answers this.
2) Is there an easy way to get back to the stock kernel? I have read that i can get back to stock everything by using the sprint download center where I did my original 2.1 update. But is there a way to get back to just the stock kernel without wiping the phone?
I just rooted my new Evo and installed SetCPU, i set up some profiles for when my battery reachs like <25 and i was testing this out at like <75 and noticed that even though the notification shows up as the profile is active, in systempanel app and also even in SetCPU is still shows the cpu reaching core speed of 998 instead of the speed it should be capped at...
So my question is, is setcpu actually working?
I just rooted tonight and installed SetCPU. I want to use it for the battery saving capabilites. I created a profile for when the screen is off and activated it, do I also need to check "set on boot" on the SetCPU main page?
View 20 Replies View RelatedDoes anybody know if the new desktop kernel patch written by Mike Galbraith can be applied or modified to be used in the android kernel?
Tiny Linux Kernel Patch Delivers Huge Speed Boost - PCWorld Business Center
I haven't messed around with android kernels yet, but I have applied it to my current Ubuntu 10.10 system and you can see the difference. Its like night & day!
I'm looking for a "stock" rom with basically everything the same but I want setCPU and tethering with everything else functional. Any tips?
View 2 Replies View RelatedI currently have bekit 1ghz kernet installed, but I was interested in trying out some other kernels. Can I just install them via Rom Manager over the first kernel? Or is there some kind of uninstall process I should use first?
View 3 Replies View RelatedFinally did the 2.2 root (whew!) but i totally forgot to choose a ROM so i'm stuck now lol. Fresh seems to be easily updated and has workign wimax from what i read but it also is still capped at 30fps. just wondering if i can install an uncapped kernel later on or if it all has to be done at the same time.
View 19 Replies View RelatedSo, I've just installed the two Hyra kernels and after checking the "about phone" section, I see the undervolt kernel has been installed. Now I've got a couple of questions.. 1. How do I know the overclock kernel was also installed? 2. Are there any settings or anything I need to turn the kernel "on" or is it automatic?
View 3 Replies View RelatedUsing Droid with Droidmod 1.0. I just updated to the newest version and for some reason when i have my profiles on.It sets it to max of 384 and min of 250. The lowest max i have set in my profiles is 600 so how can it show max is 384.
I know this is something real easy.
Of course using auto-detect
set on boot checked
on-demand (main screen)
on-demand (profiles)
max on all profiles is set to 600 min 250.
Installed a devil kernel without wiping the previous kernel (semaphore)now my phone is stuck on the turning on screen (the one with the GALAXY S symbole in white)and when i enter the recovery mode i cant wipe data/factory reset it says cant mount E: and stuff like that.
View 3 Replies View RelatedAnyone foresee any issues on OC'ing on the standard rooted ESE81? Does the kernel support overclocking?
View 7 Replies View RelatedIs there a free setcpu anywhere? (no credit or debit cards to buy the version in the market
View 4 Replies View RelatedIf I am using one of the OC kernels (the ultra-low Chevy 1.2) is SetCPU necessary? If so under what circumstances?
View 5 Replies View Relatedjust as the title says, i set the max MHz at 1100 and as soon as it goes into sleep mode or i reboot it it resets at 900 I'm rooted and have p3droids standard voltage 1.1 kernel. whats up with this?
edit - yes i searched, very broad results. maybe could have found an answer after an hour of sifting through old threads.
I am using Nexbeast 1.0 and I have installed setcpu and advanced task manager. I hear that it messes up somehow but I haven't noticed any problems. In fact before I installed setcpu my phone kept on restarting due to overheating. Am i messing my phone up in a way I can't detect? Any clarification on this issue would be great.
View 7 Replies View RelatedI did unrEVOked 3.21 and applied OMJ's 2.2 netarchy kernel ROM. I am not sure what my battery life was at this point but I was now on 2.2 after using eclair 2.1 for so long. I wanted to go to the new stock kernel so reupdated to OMJ's stock kernel 2.2 ROM. I also added back the Sprint TV Widget. Ever since, I have noticed a major drop in battery life. I usually get 30-40 hours on a single charge. Now I'm down to about 10. It is REALLY screwed up. I have CWM backups of all of the phases, including my 2.1 ROM. I might experiment rolling back if nobody else has any better ideas on how to debug?
I am using ATK but I make ATK kill itself so it is only there to help me kill procs. I noticed QIK and FRING seem to run all the time now whereas they didn't before I updated them. Not sure if that is related. TOP app shows me nothing special but system_server taking up most of the CPU like maybe 6% peaking while idling. Otherwise I just can't figure it out!! I used to be the one bragging about how awesome my battery has been (running original OTA1 which let me still use unrEVOked 1.0 to get simple root all this time). I am finally on 2.2 and I'm disappointed with battery life now. WiFi is WAY better but that is about it. My Nexus One does not suffer from 2.2 battery blues.
I just rooted my droid to Liquid froyo 1.6. Everything is smooth except for SetCPU, it doesn't want to do anything for me. I made a widget, and whenever I try to change my speed, overclock or underclock it force closes, it won't let me do anything.
View 9 Replies View RelatedI just rooted my phone today, and tried using "SetCPU". I can't get the max slider to go over 550mhz. Any idea on whats going on?
View 2 Replies View RelatedI finally rooted my phone, and put froyo on with flash. works great. Now i want to overclock as well. What do you use for overclocking the cpu speed?? I've seen setcpu referenced...are there any alternatives???
Thanks!
I just downloaded setcpu and im using nexmod 1.0 and it only allows my max speed at 600 mhz. How do i get it up to 1000 or up?
View 10 Replies View Related