i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power.after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable.
View 9 Replies
Having obtained the bootloader unlock key from Huawei, how does one unlock and root the phone? Will one be able to backup the original firmware that comes bundled with the phone and restore it on a whim, if required? Are there any custom ROMs for this particular model?
View 9 Replies View RelatedI'm looking to Unlock and Root my Huawei g600, (specifically the U8950N-51). However I'm using Linus OS, (Mint 14 KDE).
I've got the unlock code from Huawei, at least I hope because U8950N-51 because the international webpage doesn't recognize the U8950N-51.
Using Wine does not work as the unlock method just hangs looking for a device. (This method: [URL]
I have problem for flash recovery on my phone, he's unlocked, i make erase recovery but at the time I fastboot flash recovery cwmr_touch.img answer are always not a img or a folder!?I am working on a Mac.
My phone are huawei ascend g 600 huawei u8950dv100r001c17b952 and i wanted to install U8950D_FloMass-ter_1.7.0
at this time I cannot root
My phone is Huawei u8950 (unlocked and rooted). Just some time back i flashed a boot image
But after i reboot a bluee screen appears and i'm stuck there.. No even entering to recovery mode (vol plus+ and Power). I pulled the battery off and put it again, Still after the logo the blue screen appears and stays..
How to get to the recovery..? I had taken a backup to my SD card, but as i am not able to get in to the Recovery mode i'm not able to restore the back up...
I cant seem to find firmware v151 for my huawei Y300. I tried google but all I can find is v0100.
I just had the phone and ignorantly replaced its firmware from 0151 to 0100. The problem is my 3G signal dropped significantly and camera quality became very bad.
I have an Huawei Ascend y210d on which I installed CWM recovery. After that I installed a custom ROM, but now I want to flash its official firmware.But its official firmware is not installing. It got told using Huawei firmware Indian version downloaded from Huawei. I am using this procedure:
(1)First copy dload (in dload folder update.app file is present) folder to the root of the SDcard
(2)Then turn off your device pick out battery then again insert battery
(3)Then press buttons volumeup+volumedown+powerbutton
(4)Then its start unpacking the update package But in step 2 it failed on installing.
This is the error.log I get in SD Card :
{filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
filename = /mmc1/dload/update.app}
What can I do to get this fixed?
Can't install my custom firmware for my huawei u8650. Once i have yesterday installed custom rom my batery was discharged so now then i press vol+,vol- and turn on butons at once and then it stucks! here the update text file from sd card:
filename = a:dloadupdate.app
Failure: CRCMD5_RSAŠ£
Failure: operation did not succeed.
Failure: operation did not succeed.
[code]....
I just got the U9200 on Tuesday unlocked through Amazon for $290! Rooted it yesterday using a guide on xda. But when I went looking around for other firmware I noticed that my version wasn't in any list. Google search turned up one Chinese forum thread that just says the guy rooted his phone. Searching xda brought up nothing relevant.
From the About phone page:
Android version
4.0.3
Kernel version
3.0.8-00017-g636043d
android@localhost #1
Build number
U9200-1V100R001USAC00B003
Custom version
CUSTC02D003
i have try many method from other website but still not working...
View 2 Replies View Relatedwill roms made for the huawei ascend 2, work on the huawei sonic, as the phones look identical, and the specs are pretty much the same?
View 1 Replies View RelatedPls advise me the best unofficial firmware update to download. Froyo based.
View 4 Replies View RelatedI have a problem with my phone. I cant set any ringtone to it. Whether its MP3, or from system ringtones, it always plays "its" own ringtone. I got phone only yesterday and upgraded it from 2.3 to 4.0 (official upgrade) Everything wen fine.
I dont know what do with it, i looked through apps, if something doesnt have to do with it, but i think not. Is there app that sets ringtones?
I bought the phone Huawei C8650 from the USA, but it seems that it requires a UIM card instead of a SIM card. Is there a way of running the phone with a normal SIM card? I was thinking of installing a different Android version on it, because it is running android 2.3.3.
View 1 Replies View RelatedIf there are custom roms for the Huawei Ascend Y210?
View 1 Replies View RelatedI have huawei 8120 aka vodafone 845 on 2.3.7 slyking241 rom and overclocked to 768mhz from 600mhz and the 768mhz is the max on this rom and all others to this phone and im looking for a way to overclock the phone even higher for better performance.
U8120 using XDA
how to flash rom.zip?
my method:
1.Go to recovery..
2.selected rom.zip
But not succeed
any info about rooting the Huawei Q M660. I've tried Doomlord, Superoneclick, Unlockroot, and z4root to no avail.
View 7 Replies View RelatedJust got my G525, and i must say its really nice!
While i was browsing the default apps i noticed a Chinese SU app that couldn't understand.. so i deleted it and install Koush SU... but for my bad luck ( i guessed that if it already had a SU app that it would be rooted) sadly it isn't Root.
I have been trying to root my Huawei Prism II with Android 4.1.1 for a while now, but whatever rooting program I use, it will keep getting stuck on Step #7. I also tried rooting the phone manually, but ran into a problem:
Code:
1|shell@android:/data/local/tmp $ ./psneuter
./psneuter
Failed to set prot mask (Inappropriate ioctl for device).For some reason my device will show up before I begin the process of rooting, seen below:
Code:
70723C61AA05device
But when I check to see if the device is still there while in shell@android, it won't show any devices.I am wondering if this has anything to do with not having the OEM driver for this phone? I've been looking all over the internet for the offical driver, but have not been able to find one for this device, so I have been using the one that was automatically installed by Windows 7 which is the Android Composite ADB Interface.
I tried updating my U9200 from firmware B105 - B315 but it did not allow me to do so.I then followed olav's guide and flashed MIUI onto my device but i have no service now.Also, i cant get the device into recovery using the Volume UP & Volume Down and power button so try and install the huawei stock firmware again.
View 1 Replies View RelatedI got the new huawei phone from metropcs. it came out about a month ago and it is still fresh in the market. the phone is pretty badass... except for one problem. it's unrooted. Any way to root the huawei premia 4g,. the model number of the phone is the huawei-m931.
View 9 Replies View RelatedI need to root my Huawei IDEOS X3 (aka u8510) but all of the instructions I find refer to downloading some Windows app called 'automatic root enabler' however, I don't use Windows because I have better things to spend my money on!
this droid runs 2.3.3 (aka gingerbread) and how automatic root enabler works? I have adb, fastboot and a development environment but can't find the rooting process properly explained anywhere. double-click rooting is cheating anyway
I installed clockwork recovery in-place of the normal recovery image using fastboot so, i should be able to install update 'zip' files OK. i read there is a 'su.zip' which should install su for me but, I can't find a link that works to that anywhere either.
The phone is branded by bulgarian operator GLOBUL Q1 SE, but it has problems with the original ROM so we flash it with Stock rom huawei u8110 (normal).zip downloaded from [URL].
This ROM is T-Mobile but when the phone boot there is an error - The application CustomAPKsHidden (process com.huawei.android.CustomAPKsHidden) has stopped unexpectedly. Please try again. So I try to flash with other Stock ROMs, but there is an error again - when it is finish with unpacking and starts to install operation failed! So I decide to flash with a Custom ROM. I tried 12-13 different ROMs, but with every single one of them I have network error. I check baseband status - it is unknown!
[URL]
I just can't seem to restore my phones keyboard.
I have an AT&T Fusion, AKA the Huawei U8652, and I successfully rooted it.
I currently have an iPhone 4S, so I was trying to use the Fusion as a sort of Android "iPod", so I downloaded a Terminal Emulator and started deleting unnecessary applications and bloatware, and any phone-related apks (and another type of file that I cannot remember), since I figured I wouldn't need them.
I deleted these apps from the System folder, which usually is read-only, but I gave myself temporary RW access via the command:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock4/system
which allowed me to delete apps, and after deleting a few, my keyboard disappeared. I believe there was a pop-up about Google Services Framework crashing, but I had that happen prior to losing the keyboard after I deleted an app, and nothing seemed wrong.
I reset the phone to factory default to try and get the keyboard back, but nothing changed.Now I'm on the activation screen, and clicking the Android does nothing, nor does clicking emergency dial, so there is no way I can bypass the activation screen via dialing numbers.Since I reset the phone to factory default, I think I lost my root-access, so when I try to install a custom recovery image, the phone isn't recognized, and I cannot access the phone to enable USB-debugging so I can root the phone again.
I've gone into the recovery menu and deleted the cache, and data, and did a few factory resets, and nothing has changed.Is there ANYTHING I can do? I believe I was on 2.3.5, so is there like a stock ROM I can download that I can install via the regular recovery menu?The worst part about this is I only tried deleting the bloatware because I couldn't figure out how to install a custom ROM, but while looking for solutions to this problem, I figured out how to install custom ROMs on my phone...
EDIT: I tried to install a supposed stock ROM on it, but it acts as if I'm installing a custom ROM, giving me a verification error, which leads me to believe its not a stock ROM. Is there anyway I could download the stock firmware and install it on my device as to restore the missing files?
how to unlock huawei u8110 android 2.1 kernel 2.6.29
View 4 Replies View Relatedi nedd cwm recovery for t8951 huawei or another recovery ...
View 2 Replies View RelatedI'm going to build a cm7.2 rom for my huawei c8860e.
From what i've read, i download the source code on my ubuntu 12.04. However, I have not find the cm7 code for my phone.
If i want to build cm rom what i should do next?
I am new to the u8650. Some information on how to put in root mode u8650? is the same way in other models Huawei?
View 9 Replies View Relatedi'm having a problem with my huawei u8650 fastboot. when i want to install cwm recovery, i press volume down + power on and my phone freezes. only i can see, huawei logo on screen
View 1 Replies View Related