I am trying to port a ROM from the same phone brand, but they have different chipset series (MT6582 to MT6572). i have follow the instruction on this thread [URL] but still no luck, just stuck at boot logo (not even see the boot animation).
View 7 Replies
Cobbling up even a simple mod for Mediatek Android phone ROMs?
View 4 Replies View RelatedI've been looking for a way to increase wifi power on Mediatek phones (that are well known for having poor wifi reception).
I found two files:
- iwmulticall
- iwconfig
Those two are unable to modify tx-power on wlan0. (iwconfig wlan0 txpower 32)
Code:
wlan0 Disconnected ESSID:""
Mode:Managed Access Point: Not-Associated Tx-Power=off
RTS thr=0 B Fragment thr:off
Encryption key:off
Power Management period:2
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Also I found this :
Code:
coex_wifi_rssi_upper_limit=0xD2
coex_wifi_rssi_mid_limit=0xC8
coex_wifi_rssi_lower_limit=0xBF
coex_wifi_pwr_high=0xA
coex_wifi_pwr_mid=0xA
coex_wifi_pwr_low=0xA
how to change that txpower value ? Is there anything to do in init.rc ?
I have successfully rooted my T200 via Farmaroot, and got some utilities like cpuset on it to check for frequency.
On the Octocore MT6592, I notice some unique things:
In any other setting than hotplug, and utilizing the cfq scheduler the phone underperforms with Antutu benchmark with any other setting.
Both my min and max frequency at set at 1663.
The phone runs the stock build:
Android 4.2.2
Kernel 3.4.49
thl.T200.158A.20140221.JB9.FHD.EN.COM.16P256_MT659 W_V2.0.13
However, reading through the mediatek's website for the chipset, it appears it can handle a max frequency of 2Ghz. For testing purposes I'd like to set that. And give it a try.
I'm about to flash my B92M (SIII Clone) MT6577 but I need to make sure that I have everything set up. This is my first time flashing a phone and I don't want to mess it up.
So basically I'm having trouble installing the MediaTek DA USB VCOM Driver and I'm not even sure if I'm trying to install the right one. How do I go about installing this? And download link for one that supports MT6577 or does the MT6575 one work with it?
I need to have a full backup of my phone with chipset mediatek 6575 (Haipai Noble i9220). i have a root :) i try to use gsscript with script fot mt6573, but it is not good. i think that my phone no use mtd partitons but "Emmc" partitons?
this is scatter file take by a "update firmware", i need all file , because i must downgrade to old firmware
can teach how to port a rom? and my my stock to flashable zip?
View 1 Replies View RelatedHow to port a app from a rom to an another (eg : a widget from HTC Sense UI to an AOSP rom) ?
View 9 Replies View Relateddeveloping Android port for our high definition IP set top box. We are working to port Android 2.3.4 on an IP STB.
View 1 Replies View RelatedI'm using ZTE V791, I want port rom for zte v791, then i use Lenovo A60 Plus (It's same MTK 6575 and OS 2.3.6)
I follow the instructions on... [URL] .... and it's bootloop!
This is stock rom v791: [URL] ....
And this is rom for A60+: [URL] .....
I want to port mod to my Tipo stock rom, i port Pure Performance X and Pure Audio..
When i flash it via CWM, i got
status (0)
installation aborted.
how to successfully port rom..?
Xperia Tipo
JBMP 5
I'd like to start porting a ICS rom from a Motorola Pro ( aka Droid Pro ) to the Motorola Pro Plus ( aka MB623 ).
My following question is this: Is this forum ->http:[url]...good for a tutorial on porting, or do i need to search for another one? ( I'm thinking that since the Pro Plus is the Pro's predecessor, it might be close enough so that the porting would not be so hard )
I've just started looking into porting ROMs (more specifically, ICS themes to Gingerbread), and I found a few tools that port the ROM for you. If it were really that easy, isn't it possible to port any ROM to any device?
View 2 Replies View RelatedI have 2 questions.
1) how to remove element with text button from lidoid panel?
android:visibility="gone" doesn't work because the element isn't remove but he hidden.
2) how to remove or hide system bar when opens notification bar?
SystemUI.apk
Look at this xfinity app http:[url]...
View 1 Replies View RelatedI have a AllWinner A31S tablet with 4.2.2 but the manufacturer (portuguese brand called Growing) dont have any updates. The Telclast P88s has the exact same specs and i tried the official 4.4 of P88s on my tablet but i got a black screen on boot.
Its possible to port the 4.4 Teclast rom to my 4.2.2 tablet ?
My tablet is Growing GTQ818
How to port a launcher from a phone to another? For example, I would like to port SGS3 launcher or Galaxy Tab 2 or Sense launcher.
View 1 Replies View RelatedI am trying to port some Custom ROM to my Lg P710 (Lg L7 II). Since the bootloader got unlocked and now i have CWM i decided to start to port a custom rom. I read some tutorials and i understood the basics but how can i get the stock rom from Lg. I downloaded the Kdz file and tried to build from source but i am stuck here. I don't know what i shall do. When i build from source i get a really small output like e 30 MB output.
Lg Instructions for building android and kernel:
1. Android build
- Download original android source code ( Jelly Bean 4.1 ) from [URL] .....
- Unzip opensource packages of P710(Optimus L7 II)_Android_JB_P710V10h_EUR.zip into downloaded android source directory
- And, merge the source into the android source code(Jelly Bean)
- Run following scripts to build android
a) source build/envsetup.sh
b) choosecombo
c) make -j4
- When you compile the android source code, you have to add google original prebuilt source(toolchain)
into the android folder
( add prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin to PATH )
- After build, you can find output at out/target/product/generic
2. Kernel Build
- Unzip using following command at the android folder
- When you compile the kernel source code, you have to add google original prebuilt source(toolchain)
into the android folder.
- cd kernel
- export ARCH=arm
- export TARGET_PRODUCT=vee7e_open_eu
- export CROSS_COMPILE=../prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
- make vee7-rev_10_defconfig
- make zImage
3. After Build, You Can find the build image at arch/arm/boot.
I am trying to port a 4.2.2 rom but my phone currently only has a 4.2.1 rom. When I port the rom I get lots of force close errors such as SystemUI has stopped what should I do to fix this.
View 9 Replies View Relatedhow can i port miui to a 2.3 GB rom?
View 2 Replies View RelatedCan I port apps from a ICS ROM to my CM7 ROM(e.g. Internet Browser,Camera,Dialer)?
View 1 Replies View RelatedI was wondering is it possible to port htc one keyboard to lg g2?
Previous phone, as you could imagine, was htc one, and it's keyboard blows away all other keyboards..
how to port kernels???
View 3 Replies View RelatedIs it posssible port ROM to device with same cpu?
View 1 Replies View RelatedTried to port CM or PA with stock Xperia ROM? I want to port it by myself but how to do it and if it's possible.
My phone: C5303 - Xperia SP
How can port applications from s5 to s3 mini?
View 6 Replies View Relatedi would like to port CM6 from the LG GT540 to the LG Ally.
View 1 Replies View RelatedAnyway to replace the charging port on HTC One?
View 2 Replies View RelatedI'm interested whether it would be possible to port the improvements in GPU/CPU animations to CM9 as Adobe flash is not supported anymore in 4.1?
View 3 Replies View RelatedIs it possible to Port an Android 2.2 ROM to a Device that was delivered with Android 2.3 Gingerbread?
View 4 Replies View Related