I need to have a full backup of my phone with chipset mediatek 6575 (Haipai Noble i9220). i have a root :) i try to use gsscript with script fot mt6573, but it is not good. i think that my phone no use mtd partitons but "Emmc" partitons?
this is scatter file take by a "update firmware", i need all file , because i must downgrade to old firmware
View 7 Replies
How do I do a full backup of all my data? Titanium isn't working for me and I don't know why? I do also have root explorer installed but am not sure how to back up my apps and data with it.
View 1 Replies View RelatedI'm getting my Dinc replaced under warrantee due to dust under the screen and the camera lens starting to fall off for no reason. I want to back up the device as completely as possible, but the main thing I want are the apps. I have a lot of apps and it'd be a pain to re-download all of them. What is the best way of doing this? Is there an app or...?
View 2 Replies View Relatedroot the gingerbread mt6575?
View 6 Replies View RelatedHow do I do a FULL backup of my phone with TWRP?
View 7 Replies View RelatedRecently the screen on my droid 3 completely stopped working, and it looks like I am going to have to send in to get a replacement. That said, I don't want to completely loose all of my data. My question is: I got a screen viewer on my computer to display a live feed from my droid, and I am looking for the easiest way to back up as much data as possible. I don't think I can do a nandroid backup because of the broken screen, but I can definitely root and backup using the feed on my computer.
View 2 Replies View Relatedi rooted my T15A tablet with "Root_with_Restore_by_Bin4ry_v17" tool and then installed/flased "SuperCharger_Starter_Kit_RC12". After the flash my internal storage shows up with 0 byte and i am not able to install any app. A factory reset did not work too.
I've got another original T15A tablet and want to create a full backup of this and flash it to the bricked one.I found some guides on how to create a backup by connecting to an adb shell. This guides are all device specific and i now dont know.what to backup under /dev/blocks/ ....
- how to do a full backup / restore?
- Maybe we just can fix the 0 byte error (but i didnt find generic solution about that)
Code:
root@android:/ # ls -al /dev/block/
ls -al /dev/block/
brw------- root root 7, 0 2012-12-04 22:12 loop0
brw------- root root 7, 1 2012-12-04 22:12 loop1
brw------- root root 7, 2 2012-12-04 22:12 loop2
brw------- root root 7, 3 2012-12-04 22:12 loop3
[code]....
Is it possible to create full phone backup on the phone itself using adb backup? I am using android terminal emulator on xperia s. I want to backup my phone in the internal memory using command line from the phone itself.
View 1 Replies View RelatedI have an mt6575 processor phone in which want to add Greek Language settings. I have downloaded a folder form the manufacture's site, but it didn't contain any instructions.
Just some .bin files (ALICE.BIN VIVA.bin, SANSTAR50_6464_11B_BOOTLOADER_V005_MT6250_MAUI_11B _W11_32_SP_V1.bin and ZIMAGE_ER.bin)and a scatter file that can not be read by flash tool (scatSANSTAR50_6464_11B.txt).
After a lot of reading around here and a lot of other forums and sites I realised that in order to do anything, I had to root my phone. I wasn't able to do it through superclick or mtk droid tools so I followed the instructions I found here: [URL] .....
However, I am stuck on the final step.. I can't seem to get my phone on cwm mode... In fact I am not sure I know what exactly this is. I manage to open my phone on the android recovery utility but I am not able to make any choice. Everytime I press some of the menu's choises an android robot with an exclamation mark fills the screen and nothing happens...
Anyway..even if I manage to finalize the rooting process.. I still don't know what to do with the files I have... should I use them somehow on flash tool?
By the way.. The files come with a tool called Multiport Download Flash Tool which looks like Sp flash tool but has too many port options.
Is there a way to put transfer/backup/ store all internal Data onto my SD card? If not maybe App Data?
View 3 Replies View RelatedI have a little experience using computers from late 1995 Year, and from year 2000 I am using also Linux from time to time, and very rare but it was a delight freeBSD. I have no experience on Android and MacOs.
Now, I all my family (father, mother, girlfriend and I) changed the phones on Android which is Linux based, but for ARM processors.
Anyway, I have played a little with Android 4 x86 on my laptop.From, my point of view, a Android Smartphone is just a little computer like an raspberry pi / pandaboard / beagle board.So, a mini computer with an Arm processor running a very small and tiny operating system max 8 Gb, when on my gentoo install I had been using about 30-40 Gb. I know, the size can be affected by the compiling flags but anyway.
Now, on all my system I had, from my experience I did 2 Backups, like this:
My laptop is backed-up on the External Hardisk number 1, and the External Hardisk number 1 is backed-up on the External Hardisk number 2.So, as it is a good practice to have a backup handy, I keep 2 backups in 2 different location in case of hardware failure / water flood etc. Some of the files I need are backed up in the cloud, on the internet.
I use to make IMAGES of the Operating System partition, and of the mbr , and of the partition table, with software like Acronis True Image, Paragon, DriveImage XML, Norton Ghost, Clone Zilla.
When I had to do data recovery I did an Acronis "sector-by-sector" approach image of the hardisk, and I recovered files from that image.
I assume that maybe I will need to get root on one or two phones, and one phone need's to be unlocked from the carrier.
Before doing this I would like to make a full backup of the phones.
1) How can I make a FULL backup of the android phones? In this moment my mother phone is a samsung galaxy mini2 Samsung Galaxy Mini 2 s6500 and mine is Sony Xperia L
2) a) If I will "unlock" the phone from the carrier (locked on orange, but i wish to use also Vodafone, I tim, I wind, moviestar, o2 etc)
b) If I will "root" the phone to gain administrator acces on it
After step A) and B) if I will restore the original backup, the phone will be "locked" back to Orange, and "un-rooted", or it will be "unlocked" and "un-rooted"?
3) Instead of having an hardisk like computer have, I guess the smartphone is using an "usb-stick/sd-card/ssdhdd"-like memory for storage of the operating system, so how can I see the partition table, the mbr, on the device?
I have a problem with my lenovo. I updated it by ota but the new sw was terrible so i wanted to back to previous. I backuped but many apps and chinese stuff. So i decided to full format, dalvik, chache, data, system and backup my previous sw everything by cwm. After that my phone olny vibrate. Adb devices doesn't see phone. But if I plug to the usb, pc shows me disc- stupid- but only i can format it (i did not do that), and after installed drivers shows it like Lenovo HS-USB Diagnostics 9006. All day i`m looking for files to flash tool but i cannot find. Stock and cmw not working.
View 2 Replies View RelatedThere any way to do a full Nandroid Backup on my Galaxy S3 with low memory left on SD card as well as internal? Roughly only 1gb available on each of them.
SCH-R530U
The ROM that I use on my phone pretty much discourages dirty flashing updates [CM10.1 based]. So for the last 10 or so updates, I have clean wiped my HTC Rezound, then restored from a TitaniumBackup.
First I disabled compression of backups.
Then to restore I go to /sdcard/TitaniumBackup/ and run a bash command:
# for i in *.apk; do pm install "$i"; done
Then I go to TitaniumBackup, and every app is installed but doesn't have my data. So then I batch restore my data for my apps [Pretty much only user apps, except a few system things like SMS, WiFi networks]. But the problem is, recently, TitaniumBackup will quit halfway through a batch restore of "Data only." So I've been manually restoring data 1 by 1 for the apps that I need data to be saved across rom updates.
But then I thought, "Hey, why can't I just backup my /data/data/ folder?" but then I also thought that would probably be like a dirty flash.
I am trying to port a ROM from the same phone brand, but they have different chipset series (MT6582 to MT6572). i have follow the instruction on this thread [URL] but still no luck, just stuck at boot logo (not even see the boot animation).
View 7 Replies View RelatedI am using XOLO A1000. Recently I experienced a problem in my phone.The rear camera option got disappeared from camera function. I can use only front camera. I contacted XOLO care and they suggested me to apply FACTORY DATA RESET option.
Now I am ready to reset the phone but before that I need to take full backup of my phone. There is no software / tool is being provided by the company. find a software / tool which can take full backup (contacts, msg, apps, photos, settings, etc...) and restore as well without rooting the phone?
Cobbling up even a simple mod for Mediatek Android phone ROMs?
View 4 Replies View RelatedI've been looking for a way to increase wifi power on Mediatek phones (that are well known for having poor wifi reception).
I found two files:
- iwmulticall
- iwconfig
Those two are unable to modify tx-power on wlan0. (iwconfig wlan0 txpower 32)
Code:
wlan0 Disconnected ESSID:""
Mode:Managed Access Point: Not-Associated Tx-Power=off
RTS thr=0 B Fragment thr:off
Encryption key:off
Power Management period:2
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Also I found this :
Code:
coex_wifi_rssi_upper_limit=0xD2
coex_wifi_rssi_mid_limit=0xC8
coex_wifi_rssi_lower_limit=0xBF
coex_wifi_pwr_high=0xA
coex_wifi_pwr_mid=0xA
coex_wifi_pwr_low=0xA
how to change that txpower value ? Is there anything to do in init.rc ?
I have successfully rooted my T200 via Farmaroot, and got some utilities like cpuset on it to check for frequency.
On the Octocore MT6592, I notice some unique things:
In any other setting than hotplug, and utilizing the cfq scheduler the phone underperforms with Antutu benchmark with any other setting.
Both my min and max frequency at set at 1663.
The phone runs the stock build:
Android 4.2.2
Kernel 3.4.49
thl.T200.158A.20140221.JB9.FHD.EN.COM.16P256_MT659 W_V2.0.13
However, reading through the mediatek's website for the chipset, it appears it can handle a max frequency of 2Ghz. For testing purposes I'd like to set that. And give it a try.
I'm about to flash my B92M (SIII Clone) MT6577 but I need to make sure that I have everything set up. This is my first time flashing a phone and I don't want to mess it up.
So basically I'm having trouble installing the MediaTek DA USB VCOM Driver and I'm not even sure if I'm trying to install the right one. How do I go about installing this? And download link for one that supports MT6577 or does the MT6575 one work with it?
I need to do a full ROM backup for safe keeping with ROM Manager. I have Samsung Note 3 N9005, root, 4.4.2. I tried to click on "backup current ROM" but I receive an error: how to do the safety backup
View 2 Replies View RelatedI spent most of today finalizing this guide that I've been writing for the last 2 weeks (on and off) and it's finally posted.I know rooting, custom ROMs, Nandroid, and other flashing business can be confusing, especially to beginners, so I usually try to make my guides detailed, thorough, and noob-friendly (I call it "I wish somebody showed me how to do this crap when I was getting started" series)Check it out and tell me what you think: [Complete Guide] How To Flash A Custom ROM To Your Android Phone With ROM Manager + Full Backup & Restore The other guides you may find useful from the same series: Custom ROMs For Android Explained And Why You Want Them Rooting Explained + Top 5 Benefits Of Rooting Your Android Phone [Complete Guide] How To Fully Back Up And Restore Your Android Phone Using Nandroid Backup I'm going to enjoy the rest of the sunny Saturday now.
View 3 Replies View RelatedI have bought a new charger for the car which is capable of supplying 2.1A. When i connect my HTC One X it only see's it as a USB connection and not a dedicated power supply with more available.
View 5 Replies View RelatedWhen I go to system settings -> security -> encrypt phone, with phone fully charged and plugged in and a suitable PIN set, the phone reboots back to lock screen but does not appear to do anything to actually encrypt the phone. After reboot, the option remains looking identical in the settings menu. No error messages or the like.
The lock screen works fine (PIN required), the PIN is suitably long, everything is updated, etc.
I'm not sure what the issue is. I rooted & changed ROM immediately on getting the phone (it's new), so I don't know whether it would've worked w/ stock bootloader / rom / etc.
I'm running:
Nexus 4 (android 4.2.2)
ParanoidAndroid 3.65 (pa_mako-3.65-20130712 + pa_gapps-full-4.2-20130710)
TWRP bootloader (openrecovery-twrp-2.6.0.0-mako)
I think that says it all. Is there an app that will backup my entire captivate and restore it exactly the way it was from the backup?
View 16 Replies View Related[Q] Is it Okay to charge phone while doing CWM Backup?
Because it takes such a long time and battery drains quite abit, i was wondering is it ok for me to charge phone while during CWM backup.
Will it corrupt or affect the backup in anyways?
My wife's Droid 2 recently began to behave badly and make a gear-like squealing sound intermittently during some phone calls. Sometimes one a day -- sometimes every call. When it happened she could always hear it - sometimes the other partly could hear it. The phone is 11 months old and still on warranted.
I took it to the Verizon store and they insisted that they must do a "return to factory setting" and re-setup the phone to see if this fixes the problem. "It will only take 15 minutes" they said. Of course, after those 15 minutes I spent the next 4 hours trying to get it to stop yelling "Droid" at my wife every few minutes when an email, sms, phone call, usb connection etc. happened. I then realized that what I really needed was an application that saved and could restore the phone's basic settings and those of the important apps.
When I looked at the Market and App-Brain I couldn't find such an app. Without root-ing and using Titanium is there such an app that can restore the hundreds of settings that you might have tweaked?
SO basically, I'm using the "Online Nandroid Backup" app to create a nandroid to prepare for the upcoming 4.4 update and the whole root/unroot process. I want to know if I can move the backup folder from my phone to my PC (due to the complete erase that'll happen eventually), and then move it back. Will my phone recognize the backup as long as I use the same app to restore and have TWRP installed?
View 1 Replies View RelatedI have a new quad-core phone with android 4.2.1, that is now useless. It can not boot, it freeze at second bootlogo, before animation.It is rooted, and i have made some changes to build.prop. It worked fine, but after some time i realized the gallery and camera app was gone.
Then i did following:
Installed updated standard gallery+camera apk found online, both in the same app. from here [URL] Works great, but i wanted to make it a system app, so did that with titanium backup.After that, the camera app is gone. Gallery app is still working.So i tried to change it back to user app, again with titanium, but did not stop working. After some time i took out the battery.Now it freeze before boot animation.
I tried "wipe data/factory reset" and "wipe cache partition", in system recovery but still not booting!
I tried to backup user data from another phone, same model, and restore on this one but says "Error: checksum compare fail".
Do i need to flash a new rom to the phone with my pc? I have not tried this before, and i want to keep stock rom.I have read this page:
[URL]
But i can not get it in download mode, with those hotkeys?
i have access to other working phones of the same model.
I know that a Android backup is a snapshot of a system image. I wish to know if this backup will also include language files in a multi-language ROM.I bought a Lenovo phone (S890) but it only came with Chinese and English, My friend has the same phone but his came with a Multi-language ROM. I thought since we both have the same phone we can try and install the same recovery software on both phones. I can then create a Android backup on his phone and use that backup on my phone to get Multi-lang too.
View 1 Replies View Related