Is there a way to clone a Tablet to an image, and then load that image to multiple tablets?The Tablets would all me the same model of course, if this was a computer i would use a program like clonezilla. Also The tablets are a Samsung Galaxy Tab 10.1 and do not have micro sd card slots. Can not use WiFi to create or restore clone/image with a cloud service(connection is poor and unreliable). Device can not be rooted.
View 13 Replies
found a copy for iPhone 5 c
model is : unavalible
problema: not view any image
try to test 75 roms and the problem persist
So finally I managed to get root on my clone device . managed to do it with a patched recovery TWRP.
got fully root on the device now an no missing imei
if u have such a device contact me an i can get u the ported recovery
an after install off the recovery u can install the root
App that tunnels my text and whatsapp message to another android device.
Like this scenario:
3G --> message ( whatsapp or text ) --> android device 1 ( proxy ) --> encrypted -->WIFI ( internet ) --> Android device 2
This way i can send and receive messages trough another android device that acts as an secure message proxy.
I have a Nexus 7 tablet and every few days I notice a few new apps on the device. I'm not sure if they're full apps or just simply icons to download apps or get more information. I have tried to avoid using them. I know previously I had a couple apps that were sending notifications to the notification system that I considered to be spam. After some research I found out how you can find out which apps are doing it and disable notifications from those apps so that took care of that.
View 4 Replies View Relatedi have a chinese tablet (Teclast P98HD A2Q6) with some very good specs it has 4.1.1 but it's laggy there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip.can i upgrade my tablet with PIPO's firmware ?
View 9 Replies View RelatedI have this problem with my iphone 4s clone (like these two: Replika iPhone 4S MTK6573 Android 2.3' - Root Etme and MTK6573 Android 2.3.5 Fake iPhone 4S'in Orijinal ROM Yedeğini Almak in youtube). I installed an app, the iphone clone locker. Then I open it, it worked for few minutes but when press the home button, it asks me if what i'm going to use, that app or the default one. I click the default(accidentally). But it suddenly shuts down! and wont work til now.
whenever i press the power button to open it, i have this logo. But it keeps on flashing only. It only blinking until it runs out of battery.I haven't rooted it before that happened. I did everything. Holding the power button+home. Taking out the battery. But no luck. Still see the blinking logo.I don't what happened, did i bricked my phone? Or it just crashed?
i have an MTK6575 phone that seems to be unrootable.
the phone is a samsung galixy s3 clone from china it is made by the company ALPS and is using an s880 board with an MTK6575 chip running android version 4.3.0 version name such a ics or jb is unknown.
you can find a full detailed report on the phone here : my s3 close detailes
ok so far on this phone i have tried
- superoneclick
- oneclickroot
- MTKtools
- baidu.com root tool
- CWM Recovery
- Root_with_Restore_by_Bin4ry
notes to remember is that using superoneclick it dose say the phone is all ready rooted ! but i have installed super user and it has no effect and there are no root permissions on the phone.
wen using the recovery update.zip options i get the following error ( invalid OTA package ) this phone is using the stock 3E recovery.
I have a clone I9500. It has been bricked while I was trying to install a new rom
how shall I fix it. it has a MT6572 but recognizes as a MT65XX
some softwares says its a MT6589 AND SOME says MT6572
when I start up I keeps rebooting or gets stuck on the screen and I can acces the Boot manager
this is how is the boot manager:
Recovery
Fastboot
Normal.
it says alps.
I got problems with my S3 mini cloneI want to flash a image with swedish language.. this android doesnt have it..GT-I81904.1.2.
View 9 Replies View Relatedi have clone s4 and i wanted to root it.
-phone= Vissko V95(s4 clone)
-model = gt-i9500
-android 4.2.9
-baseband = MOLY.WR8.W1248.MD.MP.V6, 2013/05/08 11:19
-kernel = 3.4.5-447903 se.infra@sep-92 #1 sat jun 1 11:01:52 cst 2013
-build number = JDQ39.i9500ZSUAMDF
custom build version = i9868.i9868.02.02.A.A-V02.8-0531
I got the Thunderbird I5 and having issue with right to left (hebrew)
it has Operating System: Android 2.3.6 OS
Processor: MTK6575 2.0GHz(CPU+GPU)
IOS skin
I want to use my phone as access card (that my phone recognizes with nfc), is there a way to copy that card and mirror it with my phone? My phone is a galaxy nexus
GT-I9300
i have a clone note 3 and i want to upgarde to 4.4.i dont know where to begin.i installed kies 3 but it doesnt recognize my device
View 2 Replies View RelatedI got myself a Chinese clone of a galaxy S3 (alps 7102), it has Android's Jelly Bean 4.1.1 operating system on it.
It keeps on changing its wi-fi mac address on reboot which I guess I could put up with, I have seen other posts with similar problems on varying phones and have tried to fix it, as per the methods described for them, but I cant seem to get a fix that works, for my phone I am not very familiar with the android operating system but have some experience with linux.
The phone doesn't seem to have a bootloader as I have tried to boot the phones bootloader with the adb command "adb reboot- bootloader" from my pc but it just boots as usual, I have done a factory reset to the phone as per the instructions from the ebayer that I bought the phone from but that didn't fix it (as you might have guessed) but it did reset the phones serial number to 0123456789ABCDEF which I have no idea why that happened but has added to the issues that I would like to be fixed.
I' ve got some S4 clone phones and one of them suddenly after a restart couldn't boot. Neither my PC recognizes it as a device. I changed it the battery with other which were fully charged but nothing. I tried to boot in recovery mode or download mode and nothing. The phone is dead.
View 1 Replies View RelatedHow to ROOT this ****ing phone? xD
Spec:
1 sim card
MT6577
Android: 4.1.1
Build number: JRO03C.N7100ZSALIA
Baseband version: N7100XXALIE
Kernel: Linux version 3.0.31 - 178067 (se.infra@SEP-113) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed May 29 14:21:02 CST 2013
I tried Root_with_Restore_by_Bin4ry_v31 but without effect.
I have a samsung s 4 clone,my phone voice call are very soft regardless of incoming and outgoing.but i tried with line,viber, skype it can hear just like normal phone. I just don't understand why is the voice call is very soft, how to boost the volume? I tried upgrading to never firmware but it still the same..
View 1 Replies View RelatedI was trying to update my s4 clone, but missed click using something called mcm or something and it restore my cellphone to factory data, and know i dont have boot animation logo, i tried to use many programs like boot animation logo changer, rom toolbox but nothing works.
View 1 Replies View RelatedJust got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10[code]...
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
I just bought this phone three weeks ago and It was working well .. then I tried an App (pimp my rom) and I forgot to enable Usb Debugging mode so I restarted phone then Found a message ( Unfortunately, Launcher has stopped ) and when I press ok it shows again .. I can only switch on/off wifi bluetooth GPS and those stuff on Notification bar but I cant enable Usb debugging mode because settings crash with ( Unfortunately, Settings has stopped ) No menu No home screen .. only those messages with a useless notification bar I tried everything possible to recover this phone but failed because The computer cant define the device because of the Debugging mode and when I try to flash a rom by recovery mod it tells me signature failed Is there anything I can do for this phone? or its over?
View 4 Replies View RelatedI've bought 2 days ago the Samsung S4 I9500 China Clone & got eMMC clear or erased somehow during setting. How to recover this eMMC..??
Now when i turn it ON:
- Boot display is "ANDROID" & All application is in China based screen.
- No "Samsung Galaxy S4 I9500" Boot Screen or Samsung S4 Interface
- My personal application is gone
- I've lost Anything in terms of Samsung UI and Menu
How can i bring it back, i have flash the original BackUp ROM that comes with this phone, but the problem is still there...
Can i install CWM? Can i install ROM for original S3 mini?I found some roms here - URL>.... but i cant neither unlock bootloader or root the phone. I installed all usb, android, etc drivers, no yellow mark in the device manager. I've tried MtkDroidTools, TPSparkyRoot, SP_Flash_Tool.
I forgot to mention that the phone actually is with Android 4.1.2, i dont kno why MTK Droid root & tools says Android v : 2.3.6, it start with samsung logo and everything, but i dont have bulgarian language i this rom.
I have one Star LT29i (chinese xperia clone) with dual cpu (mtk 6577) 1ghz, 5mpx back camera end 1.3 mpx front camera, and android 4.0. I made the stupid this morning at the 3 am, i overwrited some files of the rootfs and now... I cant find a flshing tool and a valid firmware, Phone doesnt bootup, i made a emmc reset from the recovery, but the Android Boot shows the icon of Damaged FS, i can use the recovery.
View 1 Replies View RelatedHow to install cwm recovery,to flash rom and any available custom roms for this phone...
my phone is a galaxy s3 clone
Model number
GT-I9300
Baseband version
MAUI.11AMD.W12.22.SP.V5,2012/10/23 14:35
Kernel version
3.0.13
root@nebula#1
SMP PREEMPT Mon Jan 21 16:59:34 CST 2013
Build number
APLS.ICS2.MP.V1
Custom build version
004120121
I like the stock ICS/JB scrollable calendar widget but it's not very useful since it only shows events 7 days out. I know there are a ton of third-party calendar widgets out there but most don't look very good or don't show event colors, etc. What I'd like is an exact clone of the stock widget but with the simple modification of showing 30 or 60 days out.
I found source here: https:[url].....
There is a MAX_DAYS variable which is set to 7 which is then used to set a SEARCH_DURATION variable. I'm not certain but this may be used in fetching events.
I am familiar with the SDK and creating apps but have never created a widget. I'm not sure if this code can be taken to make a widget with the desired modification.
how to change the icon of its battery, WiFi and signal bar. I was able to successfully root the phone..I wanted the phone to look original by changing those icons. Even if i try to apply different themes those icons wont change. And another problem is Phone Coverage Signal weak or lost, another phone can receive 50% or full coverage signal.
View 1 Replies View RelatedI have a SGS3 Clone based on MT6575. All the details about it are here .
I have 503MB /data partition
2.09GB /mnt/sdcard partition (it is internal sd card i cannot physically acces it .. its somewhere inside it ..
13.49GB /mnt/sdcard2 which is external sd card 16GB which i have partitioned for link2sd .. and this is the fat32 partition size
and 1.15 GB /data/sdext2 partition which is on external sd card which i created for link2sd it is ext4 partition ..
So the last 2 are the two partitions on my sd card .
I want to Disable altogether the Internal SD Card of 2.09GB (if that doesn't creates any problem, or if it does creates problem then i want it to be reduced to the minimum) so that all of that space is allocated to /data partition ( or whatever it is which android complains of low disk space .. )
I have red a thread here but that is with refrence to mt6577 and mine is mt6575 . and i do have its backup obtained through mtkdroid tools and i bricked it once and unbricked it as well .. ( when it was bricked it was total brick it didnt even do anything on inserting the charger)
I am attaching EBR1 EBR2 MBR and scatter file of my device which i obtained through mtkdroid root and tools and the prepared for flash with spf option in mtkdroid tools and here is the Hex dump of these files which i obtained using ubuntu.
s@s-desktop:~/Desktop/ebr$ hexdump -C -n 64 -s 0x1be MBR
000001be 00 00 00 00 05 00 00 00 20 00 00 00 00 f7 10 00 |........ .......|
000001ce 00 00 00 00 83 00 00 00 20 f7 10 00 00 00 10 00 |........ .......|
000001de 00 00 00 00 83 00 00 00 20 ff 20 00 00 00 10 00 |........ . .....|
000001ee 00 00 00 00 0b 00 00 00 20 07 31 00 ff ff ff ff |........ .1.....|
[Code] .......
I bought an S4 clone, Manufacturer alps Model GT-I9500.
I tried with ALL ROM i found, and with GT-I9500_MT6572_ALPS-JB3(fix) ROM without success Even when i wana format or do memory test i get
Code:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail
I have bought an ALPS iPhone 5 clone from China. It's an excellent clone phone with pretty good specs.
My problem is trying to install the Google Play Store. I have spent hours and hours researching but cannot find the answer anywhere.
Of course I have tried downloading the play store.apk and installing it, which appears to work and installs find but stops when I launch it.