I was wondering about how to backup my apps from stock GingerBread 2.3.3 to restore them on a Jelly Bean 4.1.2?
To be exact I just want to back up Kik Messenger.
I9000
View 4 Replies
I'd like to know if there's a way to backup and restore all your configured sync accounts within JB.
I find it very annoying to have to redo each one after every flash.
Unfortunately TitaniumBackup doesn't work well for this anymore
Any recommendations for a good way to backup and restore SMS messages ?
View 3 Replies View RelatedI need to back up the stock room i don't need to root i made a serch i found that cwm recovery is the best way but i don't want the worng logo on reboot so can i install cwm recovery and make the backup then remove it and return to stock recovery ... is this possible ..
View 2 Replies View RelatedI'm looking for an backup application which will allow me to backup my apps and system data on roms based on stock ICS and restore to JB and vice versa.
Titanium backup does the job but after restoring on a new rom I get a lot of fc's and none of the apps works. I cannot restore call log and text messages, accounts, etc.
There's a lot of backup apps, I know. But I would like to be sure that they work as they should. Any app which will do the job?
I will upgrade my stock ICS 4.0.3 to JB when that is released to my Samsung S2. But the problem is that I have removed a lot of bloatware on my phone like Game Hub, Music Hub but also the stock-clock (and more) with Titanium Backup. But will that cause a conflict with Jelly Bean when JB is being installed? The system is missing files and apps, and then JB is installed on top of that. Sounds like a setup for problems to me. Tried JB with uninstalled stock-apps on their old ICS?
View 2 Replies View RelatedOk so I rooted my phone and installed SuperUser and Titanium Backup (paid version). My main reason was to free up some space.I clear the cache almost daily, am using just a few apps and have deleted anything that would actually make the phone any fun (like cool widgets or useful yet non-basic apps. I have no games on it. I have googled "how to move apps to SD with Titanium Backup" dozens of times in the past month and read that it's under "batch options" a thousand times. However, for the life of me I can NOT see an option under the 4th section "Move/Integrate" for anything remotely related to MOVING APPS TO SD. The only thing it shows on that category is "Integrate updates of system apps into ROM".
I have a huge external SD plugged in where ALL my pictures, screenshots, downloads, music and videos are stored. The external SD is not even half full. Yet, my 4.44GB internal memory is filled nearly to capacity with only 274MB free.
I constantly get the STORAGE SPACE RUNNING LOW message and my available space is invariably under 380MB.
WHAT CAN I DO??? I'm about to give up on Android alltogether.
I'm running Jelly Bean 4.1.2 and the main apps I'm using which I think take up the most space are GMail, Whatsapp, Google Maps, Androind Weather and Camera360.
I have a Coolpad 8720L with its own interface built upon 4.3 Jelly Bean. It's not very good, and I'd like to install stock Android instead. How do I do this?
I heard that I have to root the device, and then find a ROM for stock Jelly Bean to load onto the device?
I was using WildChild custom rom for my WildfireS and created a SMS backup before flashing and moving to m1ndh4x8 ROM. In this ROM there is no backup/restore function though.
How do I restore my messages? Can I upgrade the stock message app? Or is there any B&R app that can read the backup file? so far I tried many but non of them worked.
im trying to port crt off and on ..on deodex'd stock rom..i had try'd these methods but it didnt work'd out on jelly bean..link for porting crt off on stock jelly bean rom for GT-i9082
i had try'd these methods but no use..
[URL]
The magnetic sensor in my stock rom (JB) is deviated from the direction. and it is due to faulty sensor files in the stock rom. The sensor works perfect in old ICS version.
Calibration apps wont work because the problem lies in the sensor files itself
Stock icon app drawer it looks like 4 white quarter circles with 6 white squares inside.
View 4 Replies View RelatedI'd like to know what are the differencies between kernels for, for example, CM10 and stock manufacturer's JB. Can we use stock kernel to build something different from stock?
View 5 Replies View RelatedI'm curious how can i modify the status bar [URL] .... <---- where is wifi activation ,data sound etc.
and
notification bar [URL] ..... <--- Where is the battery ,clock wifi signal etc.
I want the notification bar ICS like (blue icons) and the notification bar icons the same ,just change the color to blue.
I followed a guide in order to change framework-res.apk and SystemUI.apk from /system/ ( my phone is rooted + cwm) but i couldnt get it going (i couldnt find all the icons to change).
I tried few keyboards so far and non of them is good as the JB stock one, my problem is that I cant add additional dictionary to the stock keyboard.
I would like to add a Hebrew dictionary...
We have lots of apps that sometimes need different kinds of ringtones. Have any of you found a good solution for restoring ringtones when switching between roms?
View 1 Replies View RelatedI had upgraded my Galaxy Gio from stock rom to custom rom (CM 7.2 based), and now I want to restore just a few apps + data (for e.g. Memo) and Contacts (from stock rom) from my Nandroid backup, so I want it should be on the current custom rom.
How far I tried to do so, I could'nt get it done. I tried with NANDROID MANAGER, I installed it and tried to restore some apps + their data, (the apps was in previous rom in System/Apps so Nandroid Manager automatically wanted to install it in system/apps), ok, the program showed as it's installed with no broblems, BUT after reboot as it required, NOTHING HAPPENED, so I looked in system/apps and data/data with root explorer, those apps & data were there, but it was not installed.....
I also tried to restore the Contacts from Nandroid (Contacts Storage), and I ended up with erasing all contacts I had currently on the phone (anyway that wasn't a problem, cause i had an regular backup of it).
So I would like to understand what the problem is, and how is it possible to have my previous memos and contacts restored to my current rom?
Unable to find my stock firmware.. every link points to the same file from hotfile.com and my ISP provider sucks causing the download to get stuck in between, tried two times at 100Kbps, failed both the times, once at 62%(552 MB)! its very hard to download it, any non hotfile link or some direct link if possible, can download it and host it as a torrent or something because i have very bad net connection and its slow also.
I am talking about Samsung Galaxy s3 19300 International/India Jelly Bean ROM, or even ICS stock might be ok. _
right now i have the stock ROM and Siyah Kernel and i want to clean instal everything and remove root.
How can I backup apps data from one tablet (old Nexus 7) and restore it to the new one ?
Actually I have some datas of application that I want to transfer on my new tablet.
I tried with Helium but with no success. I don't want to root my tablet.
Can i backup and restore system apps with DataSync?
View 1 Replies View Relatedthere was an app on Play Store (can't remember the name) that allowed you to restore apps and data from backup created by "Titanium Backup".
Now I tried searching on Play Store "Backup", "Titanium", etc but I can't find it.
HTC One X
I just flashed a new ROM on my phone but when I tried to restore my apps with Titanium, only 1 app is showing. A few days ago I had also made a copy of the Titanium Backup folder in my computer but I don't know how to (if) I can restore my apps with only the folder.
View 4 Replies View RelatedWhat is the best method to backup the order of apps and widgets in (home screen + apps drawer) after a clean rom installation. How to use Titanium backup!
View 9 Replies View RelatedI used Titanium Backup to backup my apps with data and system files. How do I restore those bookmarks and saved pages?
View 2 Replies View RelatedWhen i click on batch, then run to backup my apps it jumps back to the Backup/Restore screen with all the apps, nothing gets backed up. I have backed up before with Titanium and it worked. I reinstalled Busybox, didn't help. If i uninstall and reinstall will i lose all the things i did like freeze apps etc ? When i try to update through the marketplace it says installation error, package file was not signed correctly.
View 1 Replies View RelatedLast night I thought I should try some different fonts on my phone and downloaded an app called MyFonts. I downloaded some fonts that I thought looked nice and tried them but the subtitle for my push notifications would be cut off so I changed it back to my old font (Rosemary). However, it still gets cut off! I already uninstalled MyFonts and tried to change any of the options that I thought could work change it back to normal, but to no avail. restore the size or indents for my push notifications back to normal. It's bothering the crap out of me!! My phone is a Samsung Galaxy Note 3 & with 4.3.
View 1 Replies View RelatedI've a problem that is recurrent in the Galaxy S forum... and maybe somewhere else!
When I do a backup with TB, it goes fine.
Then I flash a new rom, restore with TB. When app is restored, everything's fine, but when I restore data, every app is force closing... This is really annoying if I want to get back my apps settings...
I rooted my kyocera hydro edge on boost mobile (4.1.2 jellybean) with framaroot 1.6.1 following the instructions and everything went fine. SuperSu updated after installation. I am trying to move applications to the sd card. I downloaded FolderMount (and a number of other apps that claim to move apps2SD but don't work) and FolderMount only sees what is on the SD Card, not internal storage. How can I move apps to my SD Card?
View 3 Replies View Relatedmy rooter galaxy S3 mini (gt-i8190N). All succeeded perfectly and I was able to update with: illusion-4.2.2.2.1_beta-20130711-0202! (current version android 4.2.2) The prob: the microphone does not work well! also beug camera! So j want now (if possible) remove the root and restore the original values! and make it to: 4.1.2
Samsung Galaxy S3 I8190 Mini N android 4.2.2 version of the baseband I8190NXXAMG 3 Kernel version: 3.0.31 + aditya-HP-Pavilion-dv6-Noteboolk PC # 1 Thu Jul 11 2013 2:20:34 IST Build number: TRIANA0020130710 operator of origin: Vodafone (Italia) current operator: Meditel (Morocco)
On my Droid X, I was able to add my CSUF (@csu.fullerton.edu) email by the following process: 1. Add existing Google account, 2. Menu button -> Browser sign-in, 3. Enter my email address and then select a Google Apps link near the bottom of the page, 4. sign in with my school info, 5. ta-dah! The problem I'm having is that I don't see a similar Google Apps link in the Jelly Bean version from step 3. I've tried a variety of combinations of signing in, without it, but I end up with failure every time. I was just receiving school emails today, on my previous phone, so I'm pretty darn sure it's just an issue with the new setup system.
I'm aware that I can set it all up through the other Email app, but I really prefer having it through Gmail.
I have now successfully added my CSUF email as an existing Google account, by following these steps...
1. Add Existing Google account
2. Don't enter any info, as one normally would to register a gmail account, and instead press the Menu button and select Browser sign-in.
3. On the following screen, enter the email only and press sign in.
4. For me, here it took me to the CSUF sign-in page and I did so.
5. I actually browsed the site a bit, from there, which leads me to believe that if your sign-in is failing by all of these other steps, the missing factor may be spending enough time signed in through the browser.
6. I pushed the back button until I was greeted with the "Signing In" message.
I've done this before, and it only exited me back out to where I could enter my email and password for an existing account, so as mentioned, success might be due to spending enough time signed in for the connection to register.