I am Using Sony Wt19i flashed with CynogenMod 9.
I have noticed that i could start a music app in cm9 using the walkman key, but was not able to minimize it.
I want to know if it is possible to minimize the app using the walkman key on my phone as in the Stock ROM.
View 1 Replies
So the "minimize keyboard" button in the lower left of the landscape qwerty keyboard works maybe every 5th time. I only started noticing this after the 2.1 OTA. However my wife has the 2.1 on her Eris as well and hers works perfectly. If I make sure to push the very top edge of the button, it works fine, but just pressing it normally in the middle rarely works. Perhaps there is something wrong with that corner if the screen.
View 6 Replies View RelatedSo I'm using NexBeast v1.1 on my Droid and noticed in the clock app there is a brightness button that dims the screen even further (similar to the bedside app I'm guessing). Unfortunately the screen dimness only lasts while in that app. I was wondering: is there a way to set the overall phone brightness itself that low or keep the screen that dim outside of the app? The lowest brightness in the Droid settings is still a bit too bright for me.
View 5 Replies View Relatedhow can i change End button function in Huawei U8120 CM7 3.4.7 Update 12.
View 4 Replies View RelatedI'm ultimately looking for a way to play/pause and skip music without turning on the screen. I had an HTC Hero a while back running CM7 RC, and I had a few options for this. Holding the volume rocker up or down skipped the song forward and backwards respectively, and when I had a headset in, the Mic button could also have these functions. A single press would play/pause, or answer a call (depending on phone state), double tap would skip the song, and a long press would activate voice search.
I now have the Epic 4G, and none of these functions work anymore. The volume rocker just changes the volume, and the mic button only answers calls, or activates voice dialing, and even then, the screen has to be on and unlocked. I find this of mild annoyance. I haven't found any obvious way to change these settings.
Basically, I want to know how do I change the function of hardware keys? Specifically, the mic button on a wired headset and the volume rockers for music functions.
With gingerbread the player has root/can get root, but with android 4.0.4 (the newest update for the walkman) there is no root. How i can get root on the device?
With gingerbread + S.onyTablet.S v5.3 [ALLinONE] i can get root (because tablet s/walkman z = same rom, i assume), but with ice cream sandwich 4.0.4 the tool is not working/can't get root. The DooMLoRD's Easy Rooting Toolkit and Bin4ry-toolkit is also not working.
I was trying to root my android phone(Eclair version-SE W8 walkman phone) and followed the following steps:
androidforums.com/x8-all-things-root/296251-new-superoneclick-root-install-use-xrecovery-xperia-x8.html
I stuck at STEP 5 in the second thread (above)
when i trying open root explorer i got this message
"restart app"
"Root explorer has not yet managed to obtain root accsess because of issuses with superuser,this often happensthe first time the app is run but usually fine from the on Click ok and restart the app to try again make sure you respoding superuser promt"
i have superuser app on my phone which means it is rooted....But when i open superuser...it has No apps in the list and there is no log information also...My phone is working fine as of now..
What I'd like to be able to do is:
if I'm connected to a specific wifi AP (my prepaid hotspot),
1) turn off autoupdates from the Google Play app
2) turn off data for all apps except the foreground app
3) or let me decided which apps I want to allow to transfer data when connecting via that hotspot
This is to minimize costs associated with using that prepaid hotspot, but the same concept could apply for people who have limited data bandwidth per month.I'm using Android 4.1 on a Samsung S3 if it matters.
Often I'll be busy browsing or writing a message or whatever and I'll be interrupted by the full-screen incoming call display.
I'm looking for something that automatically puts incoming calls in the background, ideally just in the notification bar or something without interrupting the current app.
It's particularly annoying when I'm writing a message in Opera for example and an incoming call wipes the message because Opera doesn't have a proper restore state.
I don't want to block calls all together, just make them less intrusive.
I found a program called backgrounder, but it didn't seem to work, and from the youtube video I saw of it, a full screen still appears to pop up on an incoming call.
Flashing MIUI ROM on my SE Live With Walkman. I have Cyanogenmod 7 installed curently on my phone! But now i want to try MIUI!
I need the downloadable links and guide. And I dont want the ICS version, I want GB.
I tested ACID Sound Mod v7, Xperia Z or V Walkman and another walkam port in my device but All of them dont work on my Device and all another player no longer play any song .
My device : Motorola Razr Maxx AOKP 4.2.2
in topics was told that tested on AOKP and work but dont work for me.
now I Want to know that any app in my device cause this ?
how to root sonyericsson live with walkman?
View 1 Replies View Relatedi'm using a xperia l. I use walkman for music(best looking and best sound), but since the last firmware update(new walkman version),music stops playing whenever I swipe away the walkman from recent apps! Is there any way to prevent it... maybe prevent walkman from showing in recent apps or any other method....
View 1 Replies View RelatedI've created a custom gallery; however, the "Set wallpaper" button will not set the wallpaper. Here's the wallpaper.java I have. I'm just lost on how to implement OnClickListener and then set my button to use an onclicklistener like so:
CODE:................
Can i update my rooted Sony Ericsson Live With Walkman (WT19i) To .62 by OTA.
More: My phone doesn't have other mods like CWM and other, its just rooted
I am not able to boot my phone into recovery, nor i am able to install clockworkmod recovery on my device. I have recently rooted my device by using the instructions by - nabeel (on the sony ericsson forum).
I am currently on android 4.0.4 build number--4.1.B.0.587 bootloader--unlocked kernel version--2.6.32.9-perf builduser@buildhost # 1
Is it even possible to install cwm recovery on my phone? If not then how am i supposed to install a custom ROM?
Sony Walkman Z series NWZ-Z1060 (Z1000, Z1050, Z1060, Z1070) want to flash my firmware seems after I used a update my player keeps turning itself off with a full battery charged, works plugged in so was wanting to see if a clean install will fix this problem. Was on android 4.0.4 sony update i installed the latest 2.3 update and is not working properly.
View 1 Replies View Relatedim using cellcom milestone and install a italian rom on it. i get the phone with a button on the keyboard that let u switch between the languages. this button located instead the menu button that on the keyboard after i installed the italian rom this button function is pop up the menu and not switching between the languages can i return the function of this button? from the registry or any other way?
View 3 Replies View RelatedI have just got my hero back from RMA with a new screen. (the old one was fubar). But now the back button is bringing me the homescreen. And not the last screen. So if I browse my settings, and go 4 screens in. I want the back button to bring me to screen 3 (like it used to), and not to the home screen.
View 5 Replies View RelatedIs there a way to change what the main Phone button does on the home screen? My wife has the eris and doesn't like that the phone button drops her into a dialer and call log. She wants to change it to pull up her contacts, but I can't seem to find a way to change what that button does.
View 2 Replies View RelatedIs the center "button", just a button (similar to the Omnia II devices) or is it a digital trackpad (like the Omnia I) models?
View 1 Replies View RelatedDoes anyone know how to handle Android HTC device Red (power) button programatically to stop my operation. I want to stop running some of my operation when user presses REd button when user is in my screen. I know for other buttons like Back button i could use "keyCode == KeyEvent.KEYCODE_BACK" event. But what is for Power(End) Red button? I'm not getting any keycode events for Red button when i'm in my application.
View 1 Replies View RelatedI use this button all the time on my DINC for voice commands, usually things like locate .... and it pops up google maps and shows me what I'm looking for. Since Bing is the search engine of choice on the Fascinate, what function will holding down the button serve? Will it still allow Google Voice commands? If not, I think that's a deal breaker for me.
View 5 Replies View RelatedI am trying to build a custom toggle button in Android, I want it to look like radio button but function as toggle button.
View 3 Replies View RelatedI have various activitys on my app. I have a configuration Activity, and i want to put a cancel button, that, when user press this button, the configuration window get's closed and turn back into the previous activity.i search in google and i find something about calling cancel or dismiss functions, but i can't call them cause this is not a dialog, it's an activity
View 1 Replies View Relatedshould an Android application have an exit button (or menu function) or not? Ok, if there's some service or other resources consuming something running in the background I think the user should have an option to make it stop. But what about an application that would just sit there, inactive? If I take a look at the standard application it seems that the Android philosophy is to keep the applications running and let the system decide when to stop and destroy an application idling in the background. I didn't recognize "exit" or "quit" options in the standard programs. On the other hand - why not let the user decide and give the option to quit some software if he knows it's currently not used. So, what's the advice here? Give even a "passive" application an exit button? Or not and just leave it to the system?
View 24 Replies View RelatedHope this hasn't been asked already, but here goes. When I had my G1 occasionally i would find a few apps running in the background needlessly, and would close them down. With the Nexus One every time i check, there is at least 15-20 apps running that dont need to be. Is there a way to minimize this to conserve battery?
View 2 Replies View RelatedInstalled Vlingo and am absolutely loving it so far. One thing that is a minor annoyance though is that I'm not finding a way to minimize the keyobard at all. On the default keyboard for the HTC Hero there is a button that minimizes the keyboard. Is this not an option at all with the Vlingo keyboard or am I just missing it?
View 4 Replies View RelatedHow can I minimize the stuttering of my graphics?I am using MANY ImageView's in my program (and JUST ImageView's). I change their positions directly, when I need to change them without using "onDraw" to redraw everything. Is it ok, If I do not overwrite onDraw? I have in average 10 objects which I added to the mainscreen-layout.These 10 objects are 5 trees and 5 flowers. The trees and flowers have 5 different states and therefore 5 different ImageViews which I all added to the layout, whose just are invisible. So I have about 50 ImageViews added to my main screen When one of these objects changes its state, I just make its ImageView invisible and the ImageView of the new state visible.Is it ok to do it like that?I realized that if I just use one ImageView for every object and change the ressource of it when its state changes, all objects, which are currently added to the mainscreen-layout, change their position to (0;0). That was the reason, I have so many ImageView's added to the mainscreen-layout.Is there a better solution for that?
View 4 Replies View RelatedI am using VideoView to display a video in my app. The problem is that, once the layout gets created there is lag of almost 10-30 seconds before which the video starts to play. I can see in LogCat that the video is buffering during the lag. Is there a way I can minimize this lag, or tell MediaPlayer to play the video sooner?
View 1 Replies View Related