Any possibility of a program like auto clicker for windows that will work on an android system like an s3 i9300. For example i run the program and it will tap in the same place i last tapped for 0.1 / sec .
View 4 Replies
My current custom ROM includes Youtube v4.0.5. Market shows "installed" and latest avaliabvle is v4.1.23. An update isn't offered. Next I convert it into user app in TiBu. I go to the Youtube entry in market again, re-install and presto I have the shiny new Youtube. I assume the reason an update wasnt offered initially was because the app was a system app. So this makes me wonder if there's any automated solution that scans through systems apps and checks if an updated version is avaliable? I'm aware of the risks involved and I keep backups.
View 2 Replies View RelatedWhat will the cwm backup?
if I backup a system with locked bootloader,will the bootloader relock after I restore the system from an unlocked bootloader system?
Which content will cwm backup?(include kernel?)
I'm trying to limit my mobile data usage with out jumping through hoops.
I'm looking for a widget, that with one click of a button, it can restrict background data, disable auto-sync and enable mobile data, and when pressed again, enable WiFi, disable background restriction and enable auto-sync.
This function, no matter how trivial, would save time and effort.
Is there anything like this out there? Would something like this require root?
Galaxy Nexus
I'm looking for an alarm clock app with one very specific feature - allow me to set the alarm tone to automatically stop after X seconds, then start again at the next snooze interval, and play for another X seconds.
Sure it seems every alarm app out there allows me to set Snooze intervals and stuff, but with my waking up habit, I don't like to physically have to touch the phone to get it to shut up until the next snooze interval. I like to lay in bed and let the alarm go for like 3-4 snooze intervals before I finally wake up.
I've tried Alarm Clock PlusV2, Alarm Clock Xtreme, Quick Alarm. None of them seem to have this.
I installed it on my Droid and when I open the list and long press on an app it gives me the option to Auto-Kill. I assume this means I won't have to kill this app any longer so I select this option but I find that I keep having to kill the same apps over and over again. What's the point of Auto-Kill or what am I doing wrong? There are lots of programs (most I didn't even install) that run all the time and I'm having battery issues so I don't have battery to waste on programs I'm not using and will probably never use.
View 22 Replies View RelatedIs there a way to tell Android to do the following when setting the background image for a TextView?
1. Scale the image so that it's just large enough to fill the the entire viewing area without any black borders, while still maintaining its aspect ratio. This might require clipping once the image is actually displayed, but that's OK (read on).
2. Then, center the image in the viewing area, both horizontally and vertically.
3. Finally, clip the image to the size of the viewing area, without any further rescaling.
I'm guessing that this kind of image processing is not automatically done via any of Android's facilities, and that I'll have to do it myself. If this is a correct assumption, could someone point me to some documentation or some examples which could explain how I can accomplish this? I'm guessing that I'll have to subclass my TextView and implement my own onDraw() method, but could someone confirm or deny that assumption?
is there an auto hide home screen icons app like Auto hide desktop icons for PC? I found some but its not like i want. I want that the icons should stay hidden until i tap on the home screen.
View 2 Replies View RelatedIs it possible to write data or create folder in system directory like /system/media/audio/alarms. i.e other than our respective package.
View 2 Replies View RelatedI am an Android app developer, and I have purchased a Nexus One device which I use to continuously test my developed Android applications.
Background: ----------------- One of the applications I developed uses a native shared library (e.g. myNativeLib.so). Only my application loads & uses this native library. I had developed this app before Android NDK came out. I pack my native library into my apk's 'assets' folder, and during my application start- up, I extract this native library from my package's assets folder to my app private directory (i.e. <assets> -> /data/data/<myappprocess>/ myNativeLib.so). Then I use System.load() API in my application to dynamically load this native library.
Problem: ------------ This application was developed during Android 1.5 (i.e. cupcake) days {I didn't have the Nexus One then}. The above procedure has been working without any problems right from Android 1.5 to Android 2.2 (i.e. Froyo). I have also tested the same on my Nexus One for Android 2.1 (i.e. Eclair) and Android 2.2.
The problem began the moment I recently upgraded my Nexus One to Android 2.2.1 via the FRG83 system update. Now, whenever I try to load my native library, I get the following error:
D/dalvikvm( 3653): Trying to load lib /data/data/<myappprocess>/ <mynativelib>.so <some address> I/dalvikvm( 3653): Unable to dlopen(/data/data/<myappprocess>/ <mynativelib>.so): Cannot load library: link_image[1995]: failed to link <mynativelib>.so
What I have Tried: -------------------------- 1. I tried my application using Android 2.2 SDK (emulator)...it works, no issues. 2. I checked out the latest froyo & android2.2.1 source code from Android open-source, built & tested my application + native lib using the latest froyo source...it built & ran, no issues. This should've taken care of any changes in the native code dependencies between Android 2.2 & Android 2.2.1 3. I even checked Android 2.2.1 source code for dalvik (java System & Runtime classes) + bionic (linker & dlopen sources) between Android 2.2 & Android 2.2.1 (using source checked out from Android open-source), but couldn't find anything consequential 4. I am unable to return my Nexus One to Android 2.2.
Are these the same? I have searched the forum, and can't seem to find the answer. I don't find any "auto brightness" setting in the settings menu on the Hero. I have auto backlight unchecked. What exactly does this do? Is this the screen dimming? Sorry, I am confused. Uh oh! Must be a senior moment!
While I am showing off photos I have on my phone, the screen dims...how do I keep this from happening?
Also, relating to photos..when I go to "Albums", I have 4 folders listed...Camera Shots, All Photos, etc. When I take a pictures with the phone camera, they seems to be in both folders. Why?
My wife and I have been having the same problem. We keep the auto-brightness option checked, but every so often we find that it goes back to manual mode--and it always reverts the phone back to full brightness setting. Any ideas why this would happen?
View 4 Replies View RelatedPhone: UK Galaxy S Issue: Recovery boot error message in red writing
Multicsc : can not access to / system/csc/VOD/system/
Background: I have been trying to root my phone from information found in a youtube video. All went well and the little ninja bloke with the sniper rifle was in the app list. Tried installing busybox and was told that the phone was not rooted�..
I think I ran the root application again and at some point I started getting this error message when in recovery. I have since run the one click root method to unroot the phone and the little nija dude is no longer there. Since I rooted the phone it will no longer connect to my wireless network, it finds the network and attempts to obtain an ip address. After a few min it times out and tries again. When I load the phone recovery the error message is still present.
I'm about to buy a mobile phone white label that says owning just "A-GPS" (not internal GPS). If I install a browser like CoPilot or iGO and respective maps on sd card, I can navigate offline?
In other words, my question is whether the system with A-GPS it is possible to browse offline, without spending net traffic, since the browser and maps are on the respective memory card. Or this system always needs to connect to the network?
Can we modify the system while the phone is booted now that we have the unrevoked recovery flash tool? is this what NAND unlock means?
View 24 Replies View RelatedCan android OS start/ run/ boot automatically when the charger is connected? Can the android boot up instead of showing the battery charging screen?
View 6 Replies View RelatedI have a specific problem that has persisted through multiple android devices, through all ROMs and builds. Currently I am on a Verizon galaxy nexus with cyanogen 10.1 (background in case it's more relevant than I believe).
When a timer or alarm goes off on my device, or when I receive a call or text, my screen wakes automatically. I think this may be considered a "feature" in android. However, since my phone is nearly always in my pocket, it means that the screen turns on and often receives enough of a false signal in my pocket to disable an alarm or decline/accept a call. It is very inconvenient and would be alleviated if I could specify that I want my device to turn on the screen ONLY when I press the power button.
I know that others have the same problem from searches on xda and elsewhere, but I don't see solutions (except what looks like a registry hack on some specific devices)
How to get a cover to stop screen interactions while in my pocket, nor do I want to hear about a more elaborate lock screen to keep said interactions from interfering with alarms/calls. The problem is simply that the screen comes on at all with seemingly no way to change the behavior.
possibility of use an Android tablet to develop an HMI interface to control electrical devices.
One of the problems it's that the devices could be long periods of time stored or simply off, so it will be needed to turn off the tablet via software when the device is Off.
The question if it's possible via an Android App/custom ROM/utilizing root/etc to force the Android device turn on when the charger it's connected?, an not enter with the typical battery charging screen.
Is there any way to edit system [not user's] dictionary?? Android keyboard is suggesting me a lot of misspelled words (my lang is pt-br) and those words were never typed by me. An example of this (I don't know why but still I'm giving one) is the word "no" in portuguese: "no". It is giving me "no".
View 2 Replies View RelatedI bought the following unit..T090A BMW E92 Auto Panel Android 4.04 Car PC DVD with Wince6.0 GPS 3G WiFi Bluetooth ipod support 1.2G Dual Core and 1G DDR2 Memory
Wince6 works properly now, and at the beginning android too, the problem is that now Android system dont start, seems to start to load but remain in the load screen with "android" word animated ..
how to do this in Linux, but I would like to know if there is a way to create a system group in Android? for example:
Root is member of the "Root" system group
The regular user that's logged in on the phone (I'm using an Evo LTE) is as follows:
uid=10213(app_213) gid=10213(app_213) groups=1015(sdcard_rw), 3003(inet)
I would like to know how to create these additional groups?
I'm rooted with Busybox installed.
I have an Amazon Kindle and the SGS2 which I take out and about with me.
I want to be able to transfer documents to and from the phone and Kindle (already got SSH access to the Kindle over WiFi) while out and about.
My phone is rooted and I've installed dropbear SSH. I can use connectbot to SSH into the phone locally but the shell I'm presented with doesn't see `scp`. I believe this is supposed to be included with dropbear? How do I get scp from this shell?
The reason I'm looking to do it all from a root shell on the phone is becuase I believe this is the only way to get access to the clients connected to the virtual access point. Hence I'll be able to:
be in the middle of the desert, create a WiFi tethering hotspot with the phone (though it has no signal), connect the Kindle to the phone via this access point, get a root shell on the phone and scp documents from the phone to the Kindle.
I believe I am as far as this final step but need an extra kick to get me there. Perhaps I need to install another shell?
how the android DPI system works? If i reduce my dpi on my Gnex, from 320 to 250, everything gets smaller; it gets denser (as there is more in a smaller space), however the name (dots per inch) would suggest that a higher figure would result in a more dense screen.
View 1 Replies View RelatedRe-Partition of an Android-System?
I bricked my Acer A200
What I did:root and unlock with SimpleTool V2
installed CWM
Started in recovery, did full wipe
after this getting the information, that /data can not be found
restart => rien ne va plus....
After this trying with fastboot, ADB, tools like TWRP, CWM etc to get something work again, manually cleared and also removed files and folders with ADB. At last using Weapon ROM Installer and get flashed a ROM but now my internal Card ist not fully useable - the storage information says 66MB.
I can not install any apps and the system always get aback to zero, when I do a restart
I think, I bricked the internal partition of the whole system..../data is still not usable....etc...
I have made an Android based arcade machine that I want to sell to operators. They are accustomed to having an arcade machine boot up from one switch, and they also like to be able to leave that switch on so they can just turn on and off all machines with a surge protector switch or light switch. It doesn't seem possible to just have a simple binary ON/OFF switch for the K-R42, so I have to do it by having everything hooked up to a surge protector. Problem is that if I turn off the Android box by turning off the surge protector, I can't turn it back on that way. I'd like to find a way to have the Android device power on automatically from the off state when electricity is restored (sort of like the turn on after power failure option in Windows BIOS). I had read that this may be doable in the BOOTLOADER, is that true?
View 1 Replies View RelatedIm looking for a Android powered GSM phone that will automatically turn itself back on if the battery is dead and power is reconnected.
I want to stash this in my vintage automobile and use tracking software to locate the vehicle in the unfortunate event its stolen. The only issue I need to solve is if the battery dies and the phone turns off how to turn it back on automatically. I plan to put the device in the door panels so access will be difficult.
I was wondering what does this change and how (other than better battery life...supposedly) will this affect my phone? Will it continue to work the same as before? or will it only work in sprint network with no roaming or what?
View 41 Replies View RelatedIs there a way to send a system app to another android-phone and install it there? (install the nexus S launcher on x8 or galaxy s2). I always get the message:
"✓ application not installed" (my Android is german, "✓ Anwendung nicht installiert")
How did I reduce my Android system usage it's at 78%.
View 1 Replies View RelatedLooking for link for the system requirements to install and run Android v. 4.3? Is there a common repository for this. I have an old system and wish to determine if I can get the latest O/S loaded and operational. I will need to load it via KDZ.
View 1 Replies View Related