The other day i was thinking while flashing a rom onto my galaxy nexus and i thought Why thres no one only android that can be installed in all the mobile phones, i mean like when you install linux you can choose between a lot but it can be installed on every computer it adapts itself to the computer. Why can't it be done in android?, its because that will take a lot of space?
View 2 Replies
i want to develop an application on android,webos,wince. how to develop application that should run on all paltform with developing each paltform
View 2 Replies View RelatedMy friend is after a new mobile and I pointed him towards the Desire HD & Desire (there's the only relevance). He is quite adamant about having a Dual Sim mobile. Anybody know anything about them? Benefits? Ones to look out for? I don't know anything about them, but he's come to me for geeky knowledge. He's having a look at these android ones:
Reach Tech (Xiamen) Co., LTD amongst a few others.
Android developers can check this code to check the network status on wifi and 3g mobile
You need the following permission to get status view source print? 1 <uses-permission android:name="android.permission.INTERNET"></uses- permission> 2 <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"></uses- permission>
I want to read SDCard data from android mobiles using eclipse(programmatically).
For that i want to open SDCard in binary mode,So that i can read SDCard sector by sector.
the problem is when i am debuging a programm using JNI in c++ its not going to take access in binary mode..
How to open a sdcard in binary mode using eclipse or java programming.
Recently i got 2 android phones by samsung. One is Samsung Galaxy i5801 Apolo and the other Samsung i5500(Galaxy 5).
Both these mobiles don't have a front camera in it. Is it possible to make a video call from these devices without a front camera?
Any options through android apps or etc?
We are new to Android development. We have written small code which reads /dev/graphics/fb0 and sends frames to other application through network. We are successful if /dev/graphics/fb0 is available. But some android devices have fb0 and fb1(ex - Samsung Galaxy Grand - GT- I9082, Android version 4.2.2). luckly sending fb0 frames is sufficient to get required frames. We are not able to understand why fb1 exist and what is significance of the fb1. We also found few mobiles have fb0, fb1, ... , fb13. How to find which is main framebuffer?
View 2 Replies View RelatedI cant phone mobiles but I can phone landlines can anyone help?
View 1 Replies View RelatedIs it possible to show only mobile phone numbers in the messaging contacts section. I seem to get multiple versions of the same contact showing up depending on how much info I have for them - 1 for mobile, 1 for landline, 1 for email, but in the phonebook section, all this info shows up under 1 contact.
View 1 Replies View RelatedTo help the forum and the users, when you have the 2.1 installed please post in this topic.
Just add brief and simple details like:
Where you live.
Network carrier
What FW are you using (eg generic, t mobile,o2 etc)
This will then help other people to know when the update is ready for them instead of keep trying Sunday evening onwards to get it
How to install android apk in pc???
GT-N7100
Is there any way to turn off T-mobiles frigging splash screens without rooting the phone. They are way too loud!
View 15 Replies View RelatedI have 10" MID tablets and I was messing around with the root files on 1 of them to try and get the 2nd camera to work but I messed it up and now I need to re install the operating system.
How can I create an exact image of the 2nd tablets installation so I can just boot from the image file on the broken tablet?I have searched all over and can't seem to find out how to do this. I have not even been able to see the hidden files on my PC. I tried android commander and similar programs but none of them recognized my device.
i was using it for a while but suddenly a light flactuation shut down my PC.
and it got closed without saving work.. since then i can't run any demo application even correctly..
it says a lot of error in whole program !
My phone (Cherry Mobile Bubble Android 2.3.5) was rooted before through Mobogenie's One Click Root. I don't have any problem my apps gaining root access. But i can't do software update, so i thought that's because of being rooted. So I did permanent root at SuperSU settings, and I have successfully updated my phone. But when I rooted my phone again, I can't gain root access through SuperSu. It always shows "Installation failed". I do have an update zip file on my sd cards root. But to no avail.
View 6 Replies View RelatedMy xperia X10a has slowed down tremendously and giving lots of trouble for the last few months and I wish to re-install the android 2.3.
I had rooted the phone myself after reading threads here. I have also read here that the stock version isn't really that good so I was thinking of re-installing the sony version.
1. Would Sony allow re-installing android on a rooted phone?
2. If Yes, would I have to root the phone again after installation to remove the Sony crapware? (That would be a max pain as it took hrs the first time to figure out and I didn't make any notes)
I had download official FW from Joyplay site. And i had did:
"Turn off the product, connect the computer with USB Cable, Pressing the Power and the home key at the same time, then the computer will come out "discover the new software". After installing, will operate and check the capacity of the Flash automatically."
And folowing all steps like they say to update with his tool new firmware.
And its all good till this:
Now my Joyplus M778 (resistive) is out off use and when i turn his on this massage appears:
The Device Enter PWND Mode
Please Connect USB To PC or Reset The Device
Waiting.........
Where I can download some other ROM and IMG, i had found some topic on this forum but i dont see where I can download ROM and IMG. This is my first Android toy.
I am about to assist in deploying a large amount of android device. The requirement is, that the devices (700+) need to be charged, configured and provisioned with the relevant applications for the end-users before delivery.
Device info:
Android 2.3.3
Samsung Galaxy SII
This is not windows mobile, so I am unsure if I can code/design a solution to avoid this enormous manual task.
Is it possible to code something for an sd-card that will be automatically triggered on insertion (as on WM)? This would then provision the device etc.
Is it possible to bypass the initial prompts - To my knowledge you will be prompted for entering the info for your google accounts?
do I then need to create 700+ google accounts?
how cwm rom installation in my sdcard. i research in Google. and i read someone page i was trying to open this. recovery. img with mtk tool clockwork. mod but my mehod was wrong? here is no show. my recovery. option. only. for normal phone switch off. and on. it is work but recovery. not showing. i have no pc.
View 9 Replies View RelatedI was wondering where are cookies located when you install Google Chrome on an Android device. In addition, I wasn't able to find the installation path of Google chrome...
View 1 Replies View RelatedIs there any possibility to install and use themes from CM9/10 to an LG optimus L7 (P700)? (android 4.0.3 with stock rom (v10i) and root).
View 3 Replies View RelatedCan i install kernel after flashing my new rom?.I mean i flashed my rom and can i now update my kernel without flashing rom again.
View 1 Replies View RelatedI take the CyanogenMod 10.3 for my Alcatel OT995, it works fine on my device, but I can't use adb command line neither other features using adb.exe ! I can only access to storage mass device, so I think I have a problem with the USB drivers which connect ADB command to my phone. I can add that before I've installed this Rom on the device, I've installed many drivers on the PC :
Firstly I installed the owner's driver provided by Alcatel in the AlcatelAndroidManager.exe package,
secondly I installed the Google USB drivers provided because I'm using Android Virtual Devices (AVD Manager) to do some developping works. I used to launch adb with "adb start-server" so it's still working, I don't obtain any device in the list with "adb devices", why don't I get it ?
I've realized some cleaning actions : I uninstalled the USB drivers of Alcatel's software, I uninstall the Google USB driver , to finish I reboot the PC but it don't changed anything I tried to apply this (well explained) post without any success :URL.... I can't find "Android devices" category, neither "Usb Adb" entry... so my device is not recognized in the "Settings Panel". However the storage mass device appears as a volume named "
I purchased Coolpad 7296 last week from China.
Most of the pre-installed stuff is in Chinese. I tried to optimize the phone a bit and ended up even worse.
Now, i am looking to install Jellybean 4.2.2 ROM and everything in English from the start.
Which ROM do I install?
The device board is yulong89_we_adv_jb2.
Hardware: MT6589
I got busybox pro from the market but when I try to smart install it, it shows free space as 0.0mb whereas I have around 500 my left.
AUXUS Nuclea N1
I have a problem with the new ROM I have installed. I had CM 10 Android 4.1 until I saw what paranoid android 3.1.5 can do like resizing applications, and I wanted to install it. So i did, but there seems to be a problem: the applications that I moved to SD card are not showing in the app drawer. Weren't those applications supposed to remain on the sd card after I have restored to factory settings, wiped cache and dalvik cache and installed the new ROM? The weird thing is that they don't appear in sdcard1/data/app neither. I want to see where the applications that i moved to sd card are located....
the battery drains faster...Is there an application to track the battery usage just to make a comparision with the CM 10.1 ?
I'm the developer of XenoAmp. I am trying to make it run on Froyo, the thing I did was setting in manifest:
<uses-sdk
android:minSdkVersion="9"
android:targetSdkVersion="16" />
But I was told Froyo still gives "invalid" package. So is there anything else I need to do?
On my tablet I have 500MB internal memory, 5.6GB on nand flesh and 2GB on sd. So I want to change directory of installation folder but I don't have access to PC is there any other way?
View 1 Replies View RelatedI'am trying to install a sprint app that didn't come with my sprint Google nexus, and the only way to get it is to download it is through a unknown source. I have already checked the unknown source box, but every time i get to the screen to install, the button to install wont work. Its like something in blocking it, no message shows up or anything it just doesn't work ..
View 5 Replies View RelatedSometime in the last couple days i've not been able to install any apps from the market or amazon. They show they are downloading just fine, but Installation always fails. I click on the details and get the "unknown reason -110 " The only thing I've done different is buy aThrive tablet and log into all my gmail and market stuff.
View 5 Replies View Related