I screwed up and bought and installed Easyteher Pro before I removed a previous version of Easytether Lite. The app says that I must remove the Easy Tether Lite before the Pro will work, but I can't figure out how to delete Easytether Lite. The Vibrant is a new phone for mee, so I'm still trying to figure everything out.
View 3 Replies
I am newbie, and when I did a searched "tether" here, I got threads about charges, hot batteries etc. Here is what I am looking, I have downloaded "easytether Lite" to my motorola droid, now I am stuck, I looked for the PC side download that is needed and I can't seem to find it. I am running win7 64bit. I got so real good stuff on my phone (movies of my family) and I want to upload to my pc and I need some really easy to follow instructions to proceed. Folks I don't like saying this, but you see I have 3 learning disabilities, and technical stuff just over-whelms me. So I ask for you consideration in this.
View 2 Replies View RelatedOk its downloaded and works between my EVO and my Mac but how can I make it tether to my Galaxy Tab ? I thought I had read some where that I would be able to and yes I have been searching.
View 2 Replies View RelatedI ordered a Google Dev Phone G1 way back when.
Couldn't get any response from the accelerometer (e.g. amazed, labyrinth lite don't work, etc.).
Emailed vendor support, they said to contact google because they didn't deal with that.
Spoke w/ an Android team member at I/O Conf who suggested upgrading O/ S to 1.5 and trying that, but gave me kind of a 'it's not my job' response when i asked if I could contact him if it still didn't work.
I did the 1.5 upgrade after a couple of false starts, but that didn't fix the problem.
Ok! Just a little confused here. Does Swype Lite not work with 2.1 ver.2 leak. I've followed everyones instructions and can even go through the Swype tutorial but the choice of keyboards doesn't show up when I try to send a text or e-mail. All I get is the stock keyboard. Am I doing something seriously wrong here? This is somewhat fustrating because I prefer Swype by leaps and bounds. I'd buy it from the market but it's not available. I know some will send me to other posts with instructions, but I have tried them ALL. I just can't get it to work. Any suggestions?
View 15 Replies View RelatedDownloaded easytether from market to my droid but can't get it to work with my iPad.Searched forum for setting help but came up with nothing.Can anyone point me in the right direction?
View 1 Replies View Relatedis there anything better than pdanet or easytether? I cant seem to get pdanet to stop crashing after running a few min. and easytether just doesn't seem to work.
View 4 Replies View RelatedIf I reboot my PC with the phone connected the PC drivers are apparently getting connected. I get the new hardware found window (the phone), and when I click next it can't find the drivers, not even if I point it to the EasyTether directory (Android Driver and Network Driver folders). I have to uninstall and reinstall the drivers (easytether_86 - from the link the phone has in Apps), and then plug/unplug the phone a couple times. If I unplug the phone before rebooting there is no problem.
It will be extremely difficult to remember to unplug the USB cable from the phone every time I reboot or turn off the computer. This is not acceptable. It is a royal pain to fix.
I paid the $10 to register EasyTether to get https access.
LG Ally phone (Android) (Brand new). PC - Windows XP SP3 w/all current updates.
I have tried this many times and have just come to a stop and i am wondering if it is even possible? and if it is possible could somebody please help me out and tell me how.
View 7 Replies View RelatedI am using easytether on one of my desktops at my house. Everything works great except that the connection keeps dropping. At first I thought it was because I did not have IE up (use internet connection wizard so other computer access the internet through this connection) but I noticed it still drops connection even when I was surfing with IE. Anyone else experience this? Is there a timeout issue? Should I get a keep alive program like with using a standard modem?
View 13 Replies View RelatedI installed easy tether and it seems to work well... when it works. it keeps popping up "connection dropped" "connection established" over and over....
any thoughts as to why/how to fix?
I bought my htc hero of a seller and it was unlocked to any network, i want to restore my handset but was wondeing if i do this will it lock my phone to the default network?
View 1 Replies View RelatedI find answers to change work location in Google Now,but i can't find how to remove it. I am Now self employed so i don't have a fix work place anymore. How to remove it ?
View 7 Replies View RelatedIs AT&T blocking Easytether and Pdanet from downloading in the Android Market on the Captivate?
View 5 Replies View RelatedMy brother has a Iphone and there is a app called pin pal lite. Its a bowling score / statistic keeper. For instance we bowl 2 nights a week in a league and he enters in what he did that frame every frame. The app breaks down how often you leave splits, throw strikes, pick up a certain pin. I was wondering if there is anything like that for the droid. I dont feel like spending 200 on a ipod touch to get this. I have looked for many hours and found nothing..
View 5 Replies View RelatedMaybe I can find the answers I'm looking for here. I just got my droid today (LG ally) and I downloaded NESoid and SNESoid lite. At first they ran perfectly, then when I tried running them again, everything was choppy and laggy. How can I fix this?
View 1 Replies View RelatedI did a search beforehand, but couldn't find an answer to this question.I downloaded the LITE version of Gensoid. I know it says save states are only available to the full version, but I assumed the in game save would work. I tested it immediately (didn't want to get into a game and not be able to save at all) and to my dismay it didn't work. I emailed the dev and he confirmed that even in game saving is not available on the lite version. Kinda makes the LITE version totally useless doesn't it? Anyway, my real question is if there is a way to get the emulator to save without paying 3.50 for the full version? I know what many people will say/think; "It's only $3.50, just buy it." But there are plenty of free emulators out there for PC, not sure why I would pay for one on my phone.
View 1 Replies View Relatedim having trouble finding out what actual phone i have, as the galaxy spica, portal and lite, are all the same phone. now does this mean that different countries have called it different things? orrr do they have different internal components?either way i have a really irritating problem and cant figure out which phone forum to post it in, and i dont wanna spam and post it in all of them.
View 2 Replies View RelatedI would like to use Skype through wireless but I can't log into Skype lite, so I am looking for alternatives. If I remember correctly, I came across an app that claims to do just that, but I can't recall its name.
View 5 Replies View RelatedAll I want to do is get rid of the on screen keyboard when I want to look at other stuff on the screen. I've though I read something about swiping down to get rid of it but that doesn't seem to work on my Desire. I thought I had read the instructions but if I'm missed something, please tell me. At the moments, I'm pressing "menu" to get rid of the keyboard instead of pressing back, which will work on the stock browser but on XScope actually goes back.
View 1 Replies View RelatedThere's something I'm not getting about this app, so let me explain what I'd like to do:
From 8 to 8:30a.m., when I'm on my way to work, I want it to turn off wi-fi and turn the phone ringer to full volume. I got that one figured out.
At 8:30, I'd like the phone ringer to go back to normal and wi-fi to come on. Do I need to set up a timed profile for that, or does it automatically happen when 8:30 comes?
Then from 5 to 5:30pm, I want the same thing to happen as I drive home. I'm guessing I can use the same "action" as above, and set the timer for 5-5:30pm.
When I get home, I'd like wi-fi to be on and the ringer to be normal. Do I have to set up a special profile for that, too?
Then I'm wondering about "locations" and this may be a stupid question: let's say I get home early, at 5:15. Is it possible to have a profile set up that says, "when you sense our home wi-fi network, turn the wi-fi on and override the timed 5-5:30 rule above?" Or does the wi-fi need to be ALREADY on to sense our home wi-fi network channel?
I LOVE the app "web sharing lite"...it's simple, polished and really convenient but, for some reason, it doesn't work for me most of the time. My network is good, I am connected just fine to it (I can surf and download apps and all that...) but it still won't work until it's ready to. I can restart the wifi connection, reboot the phone...whatever...nothing helps. It just seemingly has a mind of its own. Anyone else have this issue? For the networking guys in here, a bit of insight from another networking guy: I find it strange, and probably the cause of the problem even, that I can't ping my gateway (192.168.1.1 in my case) but that leaves a big "huh?" out there...if I can't ping the gateway, how the hell does all the other network stuff work.Quick side note - anyone know where I can get a list of commands for use with the "terminal emulator" from the market?
View 2 Replies View RelatedThis is truly a beginner's question. I installed and successfully ran the notepad
tutorials Note pad v1,2,3 and typed in a few notes. Can i import data (manually )from an
external text file into the sq lite dbs? I looked in my Notepad workspace folders
but no dbs seem to have been created? I looked for anything with .db extension or
named 'data' as specified in the code.
I found that sq-lite can't store Chinese words and will shows random code in the application when retrieve data.
View 7 Replies View Relatedcan anyone please help me to understand what could be the problem in the below snippet of code? It fails after insertion 2 and insertion 3 debug statements.I have the contentValues in the Array list, I am iterating the arraylist and inserting the content values in to the database.
View 1 Replies View RelatedAfter reading the thread on here about not needing a task manager, I removed mine and downloaded system panel just to keep an eye on whats always running and be able to kill any rogue apps. However, whenever I open system panel lite, its only ever the one that seems to be using the most CPU in the foreground apps, with it having the most bar full on the left. So what I'm confused about is that whether its normally just using a lot of my CPU to keep track of things, in which case I should uninstall it, or whether its a case of it showing up as using so much because I am using it at the time of checking to check the CPU usage.
View 3 Replies View RelatedI am developing an Android Application for which i would be using a high level SQL-Lite Wrapper. Can anyone suggest me a high level wrapper for SQL Lite.
View 2 Replies View RelatedI've got an HTC incredible that I'm developing on, and I understand that most all of the HTC manufactured devices since the HTC Hero have had Flash Lite.
The problem that I'm encountering is that the WebView doesn't have Flash Lite enabled, even when I'm testing on my Incredible device.
I've read up on how WebView has NPAPI & plugin support, so I'm wondering how I can reference the HTC Flash Lite plugin so that Flash can load in my app.
I understand that the Flash wouldn't work on devices without this plugin, but that is OK in my particular usecase.
How can I load up the HTC Flash Lite plugin in my app? I assume it would be loaded with the "setPluginsPath" void, but I'm not sure whatt the path to the plugin would be.
appView.getSettings().setPluginsEnabled(true); appView.getSettings().setPluginsPath("?");
First I will explain my situation.Then, I would greatly appreciate constructive dialog on how other developers feel similar situations should be managed.I wrote a simple app in November.I offered it for free on the Market for two reasons.One, Google hadn't implemented paid apps yet, so I had no choice.Two, by my own admission, v1.0 was too simple too garner payment.However, in the app's documentation, I requested donations toward future development.Out of thousands of installs, I received nothing.This week I finished a considerably fancier version of the program. Given hundreds of hours of unpaid development, I decided to charge a few bucks for the new version.I split the app into lite and pro versions.The lite version has all the new fancy features enabled but is limited in how large a document can be created (spread sheet, I limited the number of rows/cols, admittedly unlimited in the earlier version). The pro version went to Market as a new app, the lite version on top of the old app to retain the long feedback history.
Since the Market provides no way to downgrade, I put the old unlimited version on my website and put directions in the new lite version in multiple places explaining how to revert to the old version.Thus, any user dissatisfied with the rol/col limit could restore the EXACT functionality they had before upgrading to the lite version.Incidentally, the 325 character blurb allotted on the Market was insufficient to list the new features and the lite version's limitation and the caveat that the lite version could be reverted through my website.I simply could not communicate these facts to users to help them decide whether to upgrade or what to expect after upgrading.
The complaints about the new lite version have been diverse.Most pertinent to this discussion are complaints that the lite version now limits the rows/cols where the previous version didn't.I find such complaints unjustifiable since I explicitly permit reversion.I literally don't see what they have to complain about. Another irksome genre of complaints is that the program is still too simple to ask any money for at all. I am infuriated. It costs less than an ice cream cone.So, as discussion, how would other developers handle this situation: initial app is simple so offered for free,later version is complex so split into lite/pro. You don't want to limit the lite version by not showing the new fancy features, so the limitation must be something else, a time limit, a forced delay splash screen, something.I chose limited rows/cols on a spreadsheet app, but also permitted reversion to the old unlimited version.
Suppose you have an app with a lite version and a full version. The app stores some user data in SharedPreferences, and some data in a SQL database. If a user tests the app for a few days, generating data all the time, and then decides to switch to the paid version, how do you copy or share the data between the two? Some code examples would be appreciated - but for some reason I have a feeling this is much, much more complex than I hope.
View 8 Replies View Related