I have a loop which draw a bitmap for(int i=0;i<10;i++){
Here I draw a bitmap which will move to right a little bit in each loop.
I want a pause here so that an animation can be made.
View 2 Replies
I have String Array with some strings in it [UP,L,R,R...] and I have some sounds (audio_up.mp3, audio_l.mp3 and so on). I want go through all the strings in the array and play sounds accordingly with pause in between (let's say 1 second).
CODE:........................
I am having an issue with a looping audio file using MediaPlayer. I am developing a realtime game and have a 100K MP3 file I want to loop as background music. The size of the file means I can't pre-load into memory (using SoundPool) so I am using the MediaPlayer to stream the data.
All works fine, however if I set the stream to loop (MediaPlayer#setLooping(true)) when the stream gets to the end and MediaPlayer loops, I get a distinct pause in gameplay. Everything seems to hang for a good chunk of time (~100ms) presumably while MediaPlayer re-seeks to the start of the audio file, and this is killing my framerate and making the game unplayable at these points.
There doesn't seem to be a way to configure any memory buffers etc on the MediaPlayer, so I'm wondering if I am using the wrong approach?
Any other ways to run continuous background music?
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid.
My Samsung Stratosphere turned itself off sometime and now is rebooting to the Samsung logo, and then turning back off, and rebooting (a couple times earlier it booted to the main android menu, but turned back off immediately afterwards) and when I plugged it into the charger it acts like it's charging and then turns off and acts like it's charging and over and over again, even when the battery indicates that it's at more than half full.
(No custom ROMs or anything, it's all standard btw). I took the battery out and everything and it still does the same thing when I put it back. I tried to do a factory reset, but the recovery mode screen always jumps away when I try to activate it (I press both Vol+ and Vol-, recovery mode screen comes up but goes instantly, then the phone goes into a boot loop again).
My stats:
LG L35g Optimus Logic from Net10
Running Android 2.3.6
It is rooted.
Clockworkmod 5.8.4.5
Okay, first off this is totally my fault that this phone is stuck.
I was inside the About menu of android and saw there was an update for 2.3.6
So, stupidly, I decided to select it. It downloaded the update, rebooted, and then wound up at the clockworkmod recovery screen.
I tried the "reboot system now" option, but it just reboots back to the recovery screen.
I have used the "wiped data/factory reset" option. I've wiped the cache partition and Dalvik cache.
I didn't backup the stock rom, so I found these two roms for the l35g from here:
AA51
Stock (user modded version)
I used the restore option in recovery mode, but the "Stock" rom above didn't take. The AA51 rom did install fully and told me to reboot. I did, but it still went right back into the boot-loop!
I think the solution to this is to fix the boot-loop issue. Would Zengarden or Xionia work? Then, if so, I need a version of it to work with the l35g.
I'm using SAXParser to parse large xml document from the net. And sometimes I need to pause SAXParser. I know how to stop parser by using SAXException, but how I can paused it? May be can I stop parser and then set up it to pass already parsed tags?
View 2 Replies View RelatedI am seeing an issue where when I hit the "back" button, I get the onPause call, but it isn't followed by onStop and on Destroy. On most phones, I see this, but on one particular phone (Droid-X),
View 7 Replies View RelatedIs it possible to use bundle and save the data in OnPause() lifecycle method? The scenario is i have 2 edit text and have entered some data i want to retain the data when the activity is killed and started again. his can be achieved using onSaveInstanceState() but as documentation says, this method is not a lifecycle method and hence the callback is not guaranteed. So i wanted to know if there is a way to save it using Bundle in onPause().
View 5 Replies View RelatedI have an application that plays music. I want the application to get notified when the user plays a YouTube video so that I can pause the music in my own app. Is there a listener I can setup or a Broadcast receiver that I can setup to get notified of when the video is played.
View 3 Replies View RelatedI keep hearing that last.fm is better than Pandora, so I'm trying it out. But no pause button? Is this only for people who live in caves?
View 6 Replies View RelatedI see no means by which my activity can pop itself off the activity stack to return the user to the one he was using before it was invoked. Is there one? My purpose is that my app has some data structures built from data provider queries that take 5-15 seconds to assemble and I don't want a lot of latency if it is used in a few one-shot purposes in rapid succession. I'm more than willing to let the system ask my app to die, but I'd like to keep warmed and ready otherwise.
View 4 Replies View RelatedHow can i simulate pressing the HOME key to put my application in pause mode? Currently i call finish() but it destroys the application.
View 4 Replies View RelatedHow to pause and resume the activity?
View 3 Replies View RelatedHow do I do a simple sleep() in Android? e.g. in Perl:
sleep 5;
to sleep for 5 seconds. I have a program that continues scanning wifi until it finds a certain router then plays a tune once found. All works fine, but it scans in 1.6 EXTREMELY fast, where as on 2.0 it scans about once per second. I also made a stop button that does:
mainWifi.setWifiEnabled(false);
But this causes a force close. ? actually every application I have made so far except hello world just gives me a force close. I have checked my permissions in the manifest etc.? I have a soundboard app that cannot play more than 7 sounds before it force closes? why?
Is it my phones hardware?
I am getting reports that the in the HTC Magic the character that represents the pause in a dial string is different than in the Google build of cupcake. In the SDK 1.5 pre-release, the pause is given by a ','. Apparently, in the HTC magic, the pause is given by a 'p'. Unfortunately, I don't currently have the means to test this. Does anyone know if the PhoneNumberUtils.PAUSE member in the HTC magic build reflects this change? Have any other functions in PhoneNumberUtils changed in order to support this?
View 3 Replies View RelatedI need a Music player that allows you to pause an MP3 in the background and then go back to it. I have a long MP3 file (3hrs) that I need to pause during the day and switch to a different app and then back to the music player. Everytime I hit the Home button it stops the player.
Are there players that allow you to pause and go to another app?
I am learning about OpenGL and managed to write a prototype game using VBO buffers. If I start the application from Eclipse or adb, everything works fine until I press the back or <Home> button. If I restart the application either by a long press on <HOME> and selecting my program or by restarting it from the applications, I sometimes get a black screen and the LogCat shows this error:
CODE:...............
I am aware that it is probably a wrong setting in my program's flow, but I am not fluently enough with OpenGL.
I get the following error
CODE:...
When trying to execute this code in a service:
CODE:..........
When the service is first called and no MediaPlayer-object exists, the stream is started correctly. But when the onStart()-method is called again (with the player streaming) I get the above error code. I can't find any information about this error code, so I turn to you for help. Replacing mp.pause() with mp.stop() makes it work. Could it be that the stream does not support pausing? It's an online radio stream (RTSP) in the SDP format.
I have created an application that read messages with voice. I would like to pause any running media player when a message arrives in order to make the voice more clear. Is there any intent that could achieve this aim? I have noticed that google navigator, for example, is able to pause media player (and other music app like pandora).
View 1 Replies View RelatedI have an app that crops faces - something the app can do in a nanosecond, but I want the user to think it takes a bit longer. So in a case on a button click.
Here is what I have:
CODE:........
The dialog shows fine, and the faces crop fine too. The problem is - when the user runs the app, the 2 happen simultaneously on the screen.
Is there a way to make it so the dialog appears, 3 seconds elapse on screen and then the cropFaces is run? That way it will look like it cropped the faces in a few seconds, and then the new page appears.
I have an AsyncTask that acts as a countdown timer for my game. When it completes the countdown it displays the out of time end screen and it also updates the timer displayed on the screen. Everything works fine, except I need to be able to pause and resume this when the pause button in the game is pressed.
If I cancel it and try to re-execute it, it crashes with an IllegalStateException.
If I cancel it and instantiate a new AsyncTask in its place the old one begins to run again and the new one runs at the same time.
Is there a way to cancel/pause the timer and restart it using AsyncTasks or is there a different way I should be going about doing this?
I am Intercepting outgoing call following is my code of outgoing call interception in android , is used for pause, but it is not working? how can I send DTMF input or use pause, wait and symbol? I am stuck in it any help will be appreciated
View 1 Replies View RelatedI am queuing up a bunch of runnables into a thread via a Handler.post(). I would like the ability to send a note to that thread that it should pause. By pause I mean, finish the runnable or message you are currently working on, but don't go to the next message or runnable in your message queue until I tell you to continue.
View 2 Replies View RelatedI have* two activities*,
*1st one* has a ques and 4 options.
*2nd one* is like a result page (... displaying if your ans is correct or not ...and showing the right ans ..)
Now what i want is when a user clicks :
on a right option [or wrong option] ..i want to turn that Image button into green [ red] .*.and wait for a while* ..and then go to the result activity ..
*so my only concern is onclick of a ImageButton ... how to wait for a while .. and then move to other activity* * * any kind of suggestion will do ..
I have one query. In Home Application the timer is running and if any ANR or Alert or Notify come then this home activity would go in Pause state but timer is running and visible. How it is happening. Can anybody explain me how this work.
View 4 Replies View RelatedI'm start a new Activity B from Activity A, and find launch Activiy B is very slow, cost over 3000 Milliseconds, and when i click "back" to Activity A, then i found this log below:
CODE:....................
Activity B only contains a ListView with CursorAdapter.
Any idea how does this happen? this performance is unacceptable.
How to put on pause? I have not found such a function. There are other ways?
View 1 Replies View RelatedSuppose i have a program that' s currently in a PAUSED state. Then the user launches another activity. In this second one, i want to find if the first one is in paused state or not because, if its paused, i want to recover it.
Is there a way to find if a specific activity is in pause state or not?
How do i pause frame animation using AnimationDrawable?
View 1 Replies View Related