General :: DOPO D7020 Pause In CWM Recovery Loop No ADB
Jan 11, 2014
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid.
View 3 Replies
Nov 23, 2012
My Samsung Stratosphere turned itself off sometime and now is rebooting to the Samsung logo, and then turning back off, and rebooting (a couple times earlier it booted to the main android menu, but turned back off immediately afterwards) and when I plugged it into the charger it acts like it's charging and then turns off and acts like it's charging and over and over again, even when the battery indicates that it's at more than half full.
(No custom ROMs or anything, it's all standard btw). I took the battery out and everything and it still does the same thing when I put it back. I tried to do a factory reset, but the recovery mode screen always jumps away when I try to activate it (I press both Vol+ and Vol-, recovery mode screen comes up but goes instantly, then the phone goes into a boot loop again).
View 5 Replies
View Related
Jan 25, 2013
My stats:
LG L35g Optimus Logic from Net10
Running Android 2.3.6
It is rooted.
Clockworkmod 5.8.4.5
Okay, first off this is totally my fault that this phone is stuck.
I was inside the About menu of android and saw there was an update for 2.3.6
So, stupidly, I decided to select it. It downloaded the update, rebooted, and then wound up at the clockworkmod recovery screen.
I tried the "reboot system now" option, but it just reboots back to the recovery screen.
I have used the "wiped data/factory reset" option. I've wiped the cache partition and Dalvik cache.
I didn't backup the stock rom, so I found these two roms for the l35g from here:
AA51
Stock (user modded version)
I used the restore option in recovery mode, but the "Stock" rom above didn't take. The AA51 rom did install fully and told me to reboot. I did, but it still went right back into the boot-loop!
I think the solution to this is to fix the boot-loop issue. Would Zengarden or Xionia work? Then, if so, I need a version of it to work with the l35g.
View 1 Replies
View Related
Feb 25, 2010
I have a loop which draw a bitmap for(int i=0;i<10;i++){
Here I draw a bitmap which will move to right a little bit in each loop.
I want a pause here so that an animation can be made.
View 2 Replies
View Related
Sep 26, 2010
I have String Array with some strings in it [UP,L,R,R...] and I have some sounds (audio_up.mp3, audio_l.mp3 and so on). I want go through all the strings in the array and play sounds accordingly with pause in between (let's say 1 second).
CODE:........................
View 4 Replies
View Related
May 11, 2010
I am having an issue with a looping audio file using MediaPlayer. I am developing a realtime game and have a 100K MP3 file I want to loop as background music. The size of the file means I can't pre-load into memory (using SoundPool) so I am using the MediaPlayer to stream the data.
All works fine, however if I set the stream to loop (MediaPlayer#setLooping(true)) when the stream gets to the end and MediaPlayer loops, I get a distinct pause in gameplay. Everything seems to hang for a good chunk of time (~100ms) presumably while MediaPlayer re-seeks to the start of the audio file, and this is killing my framerate and making the game unplayable at these points.
There doesn't seem to be a way to configure any memory buffers etc on the MediaPlayer, so I'm wondering if I am using the wrong approach?
Any other ways to run continuous background music?
View 3 Replies
View Related
Sep 27, 2013
randomly yesterday my phone shut off and rebooted itself. Well, it became stuck on the Samsung boot screen. So I reset it again, and again, and again. Eventually I went into recovery mode and clicked the wipe data/factory reset button. Actually, at first I clicked the wipe cache button. So I rebooted it, and now everytime it boots it goes straight to recovery mode (Volume Up, Home, Power). So i began looking for solutions and decided it would be best to restore to a stock Rom. Well I downloaded one, and attempted to look for it in the internal SD card but all it said was "unable to mount sd". Did some more research, and found something called odin. I went into download mode and odin was able to recognize my device. Loaded up my stock rom (pda, .md5) and it would say this:
Quote:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
[code].....
Not entirely sure why it stopped at recovery.img. I installed the Samsung Drivers from the website and still nothing. Uninstalled odin and went to an older one, still same message. Installed a newer one, still same message.
View 9 Replies
View Related
May 14, 2013
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
View 1 Replies
View Related
Oct 20, 2013
caused & am now stuck in a recovery boot loop.
- bought a Thomson QM734-8G tablet (Allwinner A13b clone), running Jellybean 4.2.2;
- PC interface worked fine in MTP and large storage modes;
- setup Android SDK & Java JDK on PC and communicate with tablet via ADB;
All OK so far..After a couple of days, I decided to replace stock recovery with ClockworkMod Recovery, so I could start messing about with the tablet.
I found the CWM 6.0.2.8 mod supposed to work with these tablets and, following instructions, determined it was indeed running on sun5i hardware and had 10 partitions (nandj) and downloaded the appropriate version.
I used ADB sideload to install CWM and everything appeared to work OK ... until I rebooted and found myself stuck in a never-ending cycle of CWM-based recovery bootloop.All I get is the CWM recovery console, with a few lines of error & the tablet will go no further.
E:can't mount /cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
CWM functions work properly and nothing will mount through the 'Mounts and Storage' section, although sideload mode still seems to work.Attempts to use ADB sideload to install a different CWM or other recovery image have all failed, and LiveSuit and PhoenixSuit both have issues detecting the tablet (despite trying various versions of each & following instructions precisely), so I can't flash a replacement ROM to fix things.
At the moment, I just want to rip CWM out and go back to factory recovery mode and have a working tablet again! I think the Bootloader is locked and the tablet is unrooted. Superuser or SuperSU don't want to install properly. However, using ADB, it looks like I can get root access in shell (#).
View 9 Replies
View Related
Jun 1, 2013
I've been working on this phone from start to finish about 9 hours, over two days..I've Google just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works.
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable...7.2 i installed sdk after an hour of finding out how it works i finally got adb and fast boot working.
to cut a 9 hour story short, I've managed to get myself to the point where i wiped the phone of everything but CWM partitioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (I've tried this via the CWM via external SD card and side load) i reboot the phone it's as if I've never done a thing, no trace or suggestion I've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards.
Can get my phone working will do, preferably the CM 7.2 if not back to ICS 404? i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer. I've tried that exit recovery.zip thing and it did nothing :/
View 4 Replies
View Related
Aug 18, 2013
Lenovo A830 phones.
I bought it from Etotalk, so it came rooted, and with their custom version of the Lenovo Stock ROM and their custom version of CWM 5.5 installed.I tried formatting my SD card and then doing a factory data reset from within the operating system. (I was intending to install MIUI V5 after rebooting into recovery).
However, on rebooting, the device is now caught in an infinite boot loop, and I am not able to boot into recovery mode (by holding down power and both volume keys). It loads the initial splash screen, then shows a few seconds of the Android character and some whirring cogs before rebooting.
I am able to boot into Factory mode (power and volume up) or Meta mode (power and volume down). Factory mode has a number of options, but they are all in Chinese characters, which I am unfortunately not able to read.
I did notice that my SD card seemed to be write protected when I tried to format it in my computer and to copy on the new ROM - I solved this by putting it in a different phone and reformatting it. I wonder whether the factory reset process has write protected something it shouldn't have?
I've got the latest Android SDK Tools, MTK Droid Tools 2.4.8, SP Flash Tool 3.1312, some additional ADB drivers (120827 v3.7) that I'm not sure how to install, the latest MIUI V5 ROM (3.8.16), and the latest stock Lenovo ROM (S118 from Need A ROM, just in case I need it).
View 4 Replies
View Related
Jul 26, 2013
So just an hour ago I got an OTA update for my LG L9 and of course installed it. It asked me to reboot and so I did, but it got stuck in the Clockworkmod recovery and when I try to reboot the phone it just boot loops in the recovery no matter what I do.
Tried wiping, formatting everything I possibly could, but still the same.Also installed cm10.1.2, but it boots every time in the recovery after like 2-3 seconds after the LG logo appeared. The same was on the stock rom.I was running the stock jb rom which was rooted and with cwm recovery installed.
View 5 Replies
View Related
May 18, 2014
So I have a Samsung Galaxy Ace 2 X (GT-7560M) and basically I tried to flash CM11 on it, and when after the reboot, the phone was stuck in a boot loop and I can not access nor the Recovery mode nor the Download mode. I did try a USB jig and still no luck.
View 3 Replies
View Related
Dec 24, 2013
I have a Double Power EM63 tablet from Walmart. I believe it is identical to the Ematic EM63 and the MID-AM789 (Google "AM789" for specs since I apparently can't post links yet). I rooted it using Shaume (It's not in english, I just clicked the button that said "root"). I was trying to improve the tablets gaming performance, so I installed the Chainfire 3D driver, and now my tablet won't boot. It gets stuck on the "DOPO" logo, never gets to the boot animation. I can enter recovery mode, so I tried the "wipe/reset" option, but it didn't work. I think I need the stock ROM or a compatible custom ROM to flash to the tablet so it can run again, but I can't find any ROMs that would work and don't really know how to flash it.
View 8 Replies
View Related
Oct 2, 2013
I've rooted my samsung galaxy mega 6.3 GT-I9205 but I got stuck in a boot loop after trying to change my boot logo using a app called root tools. Before that everything with root worked fine.So I tried recovering the phone by going into recovery mode and wiping all of my data/factory reset and also wiping my cache. Both of these thing did not work.
So after that I went into download mode and tried to instal something I believe CWM. But now I can't even go into recovery mode because when I try, the phone says that it's going into recovery mode and then just reboots... and goes into a bootloop.
View 1 Replies
View Related
Feb 12, 2014
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the firmware rom . and Flash it many time through Odin 3.07 and it's still stuck in boot loop.
View 1 Replies
View Related
Jan 9, 2013
So I was having a problem with my Optimus V (Virginmobile) and I couldn't send or receive texts. I did a factory restart thinking it would work but then found myself at the recovery menu. When I try to flash xionia_cwma_12518.6.zip it says E:cant find update script. When I try and flash CM7.2RC1_VM670-BobZhome-052012 it installs and when I reboot i get taken back to the recovery menu.
In short; My Virgin Mobile Optimus V is stuck in a recovery loop that I am unable to get out of due to an error while trying to flash ROMs/ Custom Recovery.
The error reads at the end of all attempts: E: Can't find update script.
View 1 Replies
View Related
Jan 6, 2014
My device details: SGS3 T999, rooted, running Jellybean 4.3 on a liquid smooth ROM. Its a year old and has been a solid performer up until now.
My device is stuck in a cycle where it gives a quick vibrate, then SGS3 splash screen with white letters, then black screen, then tiny blue "Recovery booting..." words in upper left of screen, then black screen with couple vibrations, and around and around it goes in the same repeating cycle.
Just before it started I had taken the following actions: Dumped the following 2 files onto my EXTSD card (cm-11-20131217-NIGHTLY-d2tmo.zip, gapps-kk-20131119.zip) from my PC, booted phone into recovery mode using TWRP, did a factory reset wipe (success), cache wipe (success), dalvik cache wipe (success), flashed the NIGHTLY file (failed), flashed the gapps file (failed). At this point I should have sought some support. Fool! I next did a reboot step still in recovery mode. Without the reboot happening a message came up stating Superuser permission had been broken (the best I can remember) and the option to have TWRP repair the permission. I opted "yes" to repair. Then the loop started that I can't escape.
I have pulled the battery multiple times, tried a regular boot up, tried a recovery boot up (up volume+power+home) dropping the home button after a few seconds. Nothing is working. Prior to the above steps I backed up everything on the device. So I have backups to use if it can be done. My best guess is that I failed to update my CyanogenMod or TWRP to the very latest versions and it caused this hang up.
View 1 Replies
View Related
May 26, 2014
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
View 1 Replies
View Related
Jun 21, 2010
I've been running Kangerade since shortly after it came out... And loving it.. Yet today I saw my phone was rebooting - and waited (figured it over heated or some such..) and waited... And waited... That android boot image does stop being cute after a while... Crap.. Just cycling... Go into recovery... Umm.. No seriously.. Go into recovery.... Go on.... Nope. (apparently latest ROM MAnager screwed up CWmod..) So... Can't load my phone... Can't restore backup..
View 19 Replies
View Related
Dec 22, 2013
My Gnex has started to loop on boot screen and then reboot (Slimbean 4.3 update 2). I tried to wipe cache partition , to wipe dalvik cache, to flash the same rom, to flash another rom, to delete all data... but nothin happens.. it seems like the recovery (CWM) can't delete anything! if i delete or format anything , nothing happens! but the recovery told me that the process has succedeed.. I tried using Wugfresh toolkit to flash stock and also Odin.. but nothin happens.. I tried some casual commands on ADB, but i'm no good with ADB.
View 9 Replies
View Related
Jun 18, 2012
I want to pause terminal 'top' command. I tried using 'top -d 1000' but it makes it draw its output for the first time after 1000 seconds from launch, so first I would have to wait 1000 seconds to actually see its output.
How do I make 'top' stop refreshing itself?
View 1 Replies
View Related
Oct 7, 2012
Is there any option to pause downloading from Google play store? I don't have fast connection and sometimes when downloading , I need to do something else and only can cancel download.
View 4 Replies
View Related
Mar 9, 2012
Alright, I have a Droid 2 (actually my second one; both have had this problem), although it's not really a model-specific issue.
When I'm walking with the phone in my pocket and listening to headphones, the phone will occasionally think that the headphones have come unplugged when they haven't. This causes it to pause, and I have to take the phone out and unpause it.
Is there any way to disable the 'pause on headphone disconnect' feature? I understand that this is a hardware issue, but there is really no reason for it to pause, as the headphones are still connected.
The phone is rooted and Liberty ROM 3 v2.0 is installed, but the issue occurred when the phone was stock, too.
View 1 Replies
View Related
Dec 16, 2012
Any way to make Android NOT pause my music when I'm navigating? Whenever navigation speaks it pauses playback.I would rather it just turn down the music and speak over the top of it. The iphone apparently does this and for some reason Pandora does it but nothing else does.
View 2 Replies
View Related
Jun 5, 2012
How to add pause option in camera recording for xperia pro (mk16i) that is absent in android by deafault?
View 1 Replies
View Related
Feb 20, 2013
I have CM10.1 (I'm using the nightlies) and I'm using the stock email app which I love. However it's missing one feature that I'm hoping another app (whether that's a replacement email app or something that works with the stock email app) might have.
I'd like to "pause" direct-push email functionality during a certain time frame. Essentially I'm tired of seeing emails during my off-hours and I'd like to stop it from syncing automatically during those hours. Just suppress the notification during those hours (it can sync all it wants as long as I don't see it).
Is this a possibility with the stock app?
View 1 Replies
View Related
Jul 12, 2012
Currently android devices play/pause on audio cable plugin. But I need it to do the exact same thing with the charge cable. Mainly because I use a dock for music playback on one of my stereo's and would like to just drop it into the dock and it will start playing, or pull it and it will pause
View 1 Replies
View Related
Mar 3, 2014
I've managed to create a TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
Link for the TOUCH Recovery Carliv v2.2 based on CWM V 6.0.4.4 recovery for the Zen Ultrafone 701HD.....
[URL]
Mirror :
[URL]
Easiest method to have this recovery for a rooted phone is below.
1.Install mobile uncle tools from Play Store.
2. Place the recovery.img provided in root of SD card.( Rename the recovery file as simply RECOVERY.IMG)
3. open mobile uncle tools and flash the recovery.
The other ways may be followed from this link of Dextrorototrix
[URL]
Full credit for this Recovery goes to Yuweng who created the auto tool CWM Magic Create [URL] found in this link [URL], and Carliv who created the recovery that made it so easy to port to new devices, Napster who shared his touch source with Carliv, and of course the original creator of CWM - Kouch. It took many hours of hard work to get us to where we are today.
View 4 Replies
View Related
Oct 28, 2013
my huawei vision iv installed rom superjellybean 4.1 on my vision .. i got the tutorial from this thread : [URL].... i follow the instruction but when the first booting my handset going stuck on the booting animation i want to restore it to the stock rom that i already downloaded but my pc doesnt recognize my phone (i using SUT L3)
View 4 Replies
View Related
