Went to my homescreen and it was blank except for my background. A soft reset wouldn't load sense either. I have changed nothing on my phone, non rooted.What would cause this and how can I get all my sense widgets back?I realize this might get moved, but no one visits the support and troubleshooting forum on here, and I need quick help.
View 3 Replies
My battery died this evening so I stuck it on charge but each time it tries to load I get an error with HTC Sense (process com.htc.launcher) and a force close. This just happens over and over!
View 4 Replies View RelatedDo I have to buy a certain kind of micro SD card for the Eris? I bought an extra 2gb Sandisk micro SD card and I tried to use it to update my friends phone to 2.1 v3 and it didn't ever load the image when in boot. I finally had to take my card out of my phone and use it. A pain, but it worked. I'm just wondering if I got the wrong card?
View 4 Replies View RelatedIs there no Facebook Sync in Jagar? Do I have to load sense to get that to work?
View 2 Replies View RelatedI was messing around with root explorer and noticed that i was able to delete my boot animation with it when i was mounted as R/W so i thought i would try to copy one and it also works... so no need to push with adb shell.. here are the steps
1. take the boot animation make sure it is named bootanimation.zip and copy it to your SD card
2. then open root explore and mount R/W and then navigate to the file and press on file till the menu comes up and select copy
3. then navigate to data/local and paste the file in the local directory
and you are done, this can be done with the android_audio.mp3 file as well just paste it to the same place.
just thought this would make it easier for people instead of using adb shell
root explorer:
http://www.appbrain.com/app/com.speedsoftware.explorer
I have no clue what's going on here but TB won't restore my contacts.I had 2.1 and installed the older 2.2 leak from over a month ago and was able to restore contacts then via TB (although I don't exactly remember how).I wanted the new 2.2 and downgraded the radio and returned to stock, did unrevoked forever and put 2.2 on my phone.I restored all my apps but the contacts are gone.They aren't stored on VZW or Google either.Am I missing something?I went through the system stuff in TB and clicked on everything that was green and restore app and data several times and then I restored just data a few times too and still nothing.I know my contacts are saved in here somewhere.
View 13 Replies View RelatedI am triying to use PutYourBootHereWithAudio like before and it runs through all the steps fine but the phone reboots with the old (or new) htc startup still...I downloaded htc sync before hand as that is what worked for me in the past, anyone else get this?
View 22 Replies View RelatedI've got a couple apps that I like that don't run at boot and should. (master volume control and SMS scheduler) Is there an app that will let me run like batch file or other to specify what programs run at boot? I see a few that will let me ignore/skip apps at boot, but nothing that will let me add...
View 5 Replies View RelatedDoes anyone else get this message when opening Google Maps? It has happened on my Moment and Hero.
View 1 Replies View RelatedDownload these three files and put them in the root of your sdcard. (You must have ADB on your computer)
File 1 : Download (rename to "update.zip")
File 2 : Download
File 3 : Download(Handler 1.5)
Step 1 : Boot into stock recovery (Camera+Power then select down) (press Alt + L to see options)and flash file one.
Step 2 : Load up ADB when the computer recognizes it type.
[Quote]
I just tried to load the GalaxoSense Theme to Galaxo 1.6.1, and now my phone won't boot. I'm in the process of flashing with Odin, and I'll let you know how that goes, but what is the proper procedure for applying a theme?
View 9 Replies View RelatedJust finished unlocking the boot load and rooted my GN using the GNEX toolkit, and restored my apps fine.
However, Dropbox did not seem to work properly. I was able to login, but couldnt access my files correctly. For example, I was able to open my Keepass file, but not able to save any changes...it would just complain about not being able to save.
I've uninstalled and reinstalled both Dropbox and KeepassDroid, with no success. The wieird thing is I also tried to browse the SD Card using ES File Explorer, and I'm not able to delete the Dropbox .thinkfree directory, nor am I able to delete/copy/move/rename the local Keepass directory and file...it just complains that it cannot perform the operation
I've had my desire a few weeks now and have played with all the settings to try and get this to work, however I cannot get HTTPS sites to load, they just constantly time out. I've tried several different browsers however they don't load in any of them...xscope, dolphin, opera or standard.
View 1 Replies View RelatedThis has been posted under the sprint htc hero forum, however i know there are much more people posting here that can help with this problem. Maps works fine, but when I open the app a pop up shows "unable to load the url", its pretty annoying. How can I get rid of this....clearing the cache and defaults did nothing.
View 2 Replies View RelatedEvery time I open Google Maps, a little pop-up window says "Unable to load the URL" The program works fine, it's just kind of annoying. Does anyone else experience this? Is there a known solution? I cleared the cache and data and force-stopped the ap, but it still happens. For what it's worth, the same exact thing happened on my Moment (well, on the Moment Google Maps didn't work at all due to the POS GPS)
View 4 Replies View RelatedIn my app, I am using below code to obtain all contacts with PHOTO_ID:
CODE:.............
The app has a list view to display all contacts and use the ContactPhotoLoader in the stock contact app to load the contact photo async. When running, some contact photo can be displayed correctly and some cannot.
When clicking on the list items, the app will start the view contact activity of the stock contacts app:
CODE:..............
For the contacts, which photo cannot be displayed properly, is able to display correctly in the stock view contact activity. I have compared the source code of the stock contacts app and my app. They are doing the same thing basically. I have also checked for the permissions used by my app are covered the set of permissions used by the stock contacts app.
Title stated, Google search, Google home search, etc. Wont load(blank screen after progress bar fills.) What have I done now.
View 5 Replies View RelatedI installed PDAnet, it's been working fine until today. I logged on to my facebook & was playing games & messing around. Later I got online again, went to facebook, the page loaded fine. I typed my login info in, hit enter,it took a minute to load, then said page cannot be displayed,then a box popped up in the corner at the bottom telling me Secured pages are blocked, register for full version. So now I cant login to ANYTHING (except this website for some reason). Any idea as to why it was working fine before but not now?
View 5 Replies View RelatedI am trying to compile a WiFi driver (ath6kl) for my Sony Xperia E (Android version: 4.1.1, compilation: 11.3.A.0.47). I have downloaded the source code for compilation 11.3.A.0.47 from here: developer.sonymobile.com/downloads/xperia-open-source-archives/open-source-archive-for-build-11-3-a-0-47
I have compiled required kernel modules (cfg80211 and ath6kl_sdio), but I have encountered some problems during this proccess. I don't understand why on my android device (in /system/lib/modules/ath6kl) there are two modules: ath6kl_sdio.ko and cfg80211.ko (first one depends on the second one). But when I look at my sources, I see the following module dependencies for ath6kl: ath6kl_sdio -> ath6kl_core -> cfg80211. So there are 3 modules instead of 2. Anyway, after some modification (I merged ath6kl_core and ath6kl_sdio into one module) I managed to compile ath6kl.
I have replaced compiled modules in /system/lib/modules/ath6kl on my android device, then rebooted and I got the following error:
<4>[ 23.055226] ath6kl_sdio: disagrees about version of symbol cfg80211_sched_scan_results
<4>[ 23.055251] ath6kl_sdio: Unknown symbol cfg80211_sched_scan_results (err -22)
[Code]....
I am very desperate cause I want to modify this driver (to be able to calculate some network statistics) but I cannot load modules at all so I am stuck.
Has anyone been successful showing a notification, starting an activity, or loading the home screen *during* a call on the Droid? All three of these actions can be done with the emulator running 2.0, but will not run from the Droid. I don't receive any type of notification that these actions fail on the Droid. Although, every action works when a call is *not* active. Missed calls during a call *do* show up in the notification bar, so I am hoping there is a way.
I understand that the notification bar can not be accessed by users during calls, but it would be nice if a notification could at least be delivered. I also understand the security and usability concerns of displaying a window or action during phone calls. Although, there are a lot of users who would like actionable functionality based on calls.
I tried flashing back to an older rom I used before, but this time it said there was an error and wouldn't work. I tryed doing a restore and that didnt work either. Now when i try to reboot, it just gets stuck on the 3 skateboarders. And when i try to go into recovery it just shows the triangle with an exclamation point, instead of the old menu I used to have. Is it fixable or did I brick it?
View 11 Replies View RelatedI'd just want to get the root on my device in order to having other languages on my phone.What I have done is just trying to the fast boot to put mini recovery mode according to UPDATE 14/10 - V4.1! - ROOT/RECOVERY IMAGE update, wipe, backup and restore GALAXY - HDblog - Forum. Where I stuck is when I type fastboot flash recovery recovery.img in DOS shell. It just displays forever like
<Waiting for device>
Anyone got any idea to pass this thing?
I am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.
My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.
The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)
I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.
I'm having trouble booting my LG Optimus G into recovery mode. I've rooted the phone and installed ClockworkMod recovery. When I try to boot into recovery, either from the ROMmanager app or by holding Volume Up and Power, it comes up with the LG logo and gives this error: Secure Booting Error! Cause: boot certification verify. It just stays like that until I press and hold the power button again until the phone shuts off entirely. Then I'm able to boot into the stock operating system and the phone works fine, but I can never get it to boot into recovery.
The error I mentioned above seems to be a well documented error on the internet, but it seems like other people that are having the trouble are completely bricking their phones. Mine is able to come out of it. All the solutions I'm finding pertain to a phone that's completely bricked and involve taking the phone back to stock. My phone works fine with the stock ROM, but I'd like to play with some custom ROM's.
i'm having trouble to boot my desire S..i tried to install some new roms, but something web wrong: usualy i had the following partitions:
/dev/block/mmmblck0p25 -> cache
/dev/block/mmmblck0p26 -> system
/dev/block/mmmblck0p27 -> data
al of them ext3, but now if i log in with adb i'm able to mount anoteher partition /dev/block/mmmblck0p28 -> witch in some point was montend on /system/lib and is ext4
now if i adb shell: parted /dev/block/mmcblck0 i becom the error: Can't have a partition outside the disk.my asumtion is that some rom flashing wrote somting were it shoudn't. if i format using fastboot, (i'm not sure if this is posible www_ omappedia.com/wiki/Android_eMMC_Booting ) i'm preaty sure i'm formating also x-load and bootloader.
I have an eris flashed with PB00IMG and I believe I have root access. I am able to remove apps through terminal. I cannot get the google maps to update. I have removed maps.apk, htcnavi.apk and com.google.android.maps.jar. I have removed these separately and all together. I have been able to get it to update before, but I reflashed the PB00IMG because I could not get youtube videos to play without the stock browser. I got the youtube videos working again but cannot remember how to get the maps to update again. I wanted to try flashing different roms. I have downloaded a couple, placed them on the sdcard, and booted but I cannot get them to boot.
View 1 Replies View RelatedI have tried holding down the volume buttons and power button several times the past three days and nothing. The device vibrates and nothing happens. If I continue to hold the buttons then it vibrates every 6-7 seconds. I also tried to get into fastboot using a toolkit in our development section with no luck. The toolkit says I'm in fastboot when connected, but nothing is on my screen.
At this point I am at a complete loss. If I can't get it to work is that a valid reason for replacement by Google?
I am using Karbonn a111, I have rooted it and then i was trying to flash CWM recovery uning mobile uncle tool. but its was not able to do this , every time it booted into stock recovery.
Then i tried to flash "CWM5.0.2.8recovery " using fastboot. After that my phone stopped to boot into recovery mode. Even my phone is not allowing to do phone reset in phone setting. How to rectify it and how to install CWM recovery.
After unlocking my phone's bootloader and flashing the kernel:
When I power off the phone, it gets into a state where I cannot control it by itself (black screen, no charging light if connected to a power source, does not react in any way to any key).
However, I am able to access it via adb over USB. Using adb, I can put it into some other state (reboot, reboot bootloader, etc) and again gain control over it (also through its own keys). When I select the "power off" function of the bootloader, it enters this state again.
I can even reboot the phone (also into recovery/bootloader/fastboot) from any state
So I can use the phone, but I can't power it on by itself, which isn't a good situation when I don't have a computer around.
device: HTC One S
ROM: CyanogenMod 10 (device is officially supported by CM10; I used the version I found in the Wiki.)
kernel: The one included in CM10 (had to be flashed manually via fastboot because of restrictions by the device; I flashed the kernel before flashing the ROM)
I am looking to compile a new kernel for this device. I have pulled off the boot.img file from /dev/block/nandc and used split_bootimg.pl to pull apart the kernel and the boot ramdisk. I have used extract-ikconfig to get the kernel config and built my new 3.4 kernel (with modules). So far so good...
I have tried to build the new boot.img file with no avail. My concern is with the original kernel as the new one should be build the same (I think). It looks like it is not compressed as I run the command
file boot.img-kernel
It returns
boot.img-kernel: data
So it is not a Linux kernel ARM boot executable zImage
Is this correct? Can Android boot with this or is the split_bootimg.pl tool not creating the file correctly (it does pull the ramdisk as I have uncompressed it fine! and the file does contain the kernel config)
Ok So assuming I can create a proper boot.img with my built zImage and the old ramdisk, what do I need to do with the modules? Do I update the boot.img on the tablet and copy the modules over to the existing /system/lib/modules? (this appears to not work)