General :: PMID10c - Unable To Build New Boot IMG File?

Oct 9, 2013

I am looking to compile a new kernel for this device. I have pulled off the boot.img file from /dev/block/nandc and used split_bootimg.pl to pull apart the kernel and the boot ramdisk. I have used extract-ikconfig to get the kernel config and built my new 3.4 kernel (with modules). So far so good...

I have tried to build the new boot.img file with no avail. My concern is with the original kernel as the new one should be build the same (I think). It looks like it is not compressed as I run the command

file boot.img-kernel

It returns

boot.img-kernel: data

So it is not a Linux kernel ARM boot executable zImage

Is this correct? Can Android boot with this or is the split_bootimg.pl tool not creating the file correctly (it does pull the ramdisk as I have uncompressed it fine! and the file does contain the kernel config)

Ok So assuming I can create a proper boot.img with my built zImage and the old ramdisk, what do I need to do with the modules? Do I update the boot.img on the tablet and copy the modules over to the existing /system/lib/modules? (this appears to not work)

General :: PMID10c - unable to build new boot IMG file?


General :: Build Kernel MT6577 - Can't Boot After Build

Feb 21, 2013

I have a phone with a MT6577. The vendor (Wiko) published the kernel source code. So, i'm trying to build it. I can get the zImage. I converted it to boot.img but i can't boot with it on my phone.build a good zImage? (if you want to try) : URL...

cp mediatek-configs .config
TARGET_PRODUCT=s9081 MTK_ROOT_CUSTOM=../mediatek/custom make
# sudo mtk-tools/repack-MT65xx.pl -boot zImage boot.img-ramdisk boot.img
MTK-Tools by Bruno MartinsMT65xx repack script (last update: 27-01-2013)
Repacking boot image...
Ramdisk size: 2046 blocs
Repacked boot image into 'boot.img'.

Here are the Warnings I got when compiling

mediatek/platform/mt6577/kernel/drivers/video/tvc_drv.c:61:5: warning: "FIXED_WVGA_PARAMS" is not defined
net/ipv4/tcp.c: In function 'tcp_nuke_addr':
include/net/ipv6.h:338: warning: 'in6' may be used uninitialized in this function
net/ipv4/tcp.c:3367: note: 'in6' was declared here
In file included from net/ipv4/netfilter/ipt_LOG.c:27:
include/net/netfilter/xt_log.h: In function 'sb_close':
[code]....

View 9 Replies View Related

General :: Xperia Arc S Build File?

Apr 1, 2012

I was looking through my system files with root explorer and I notice in the build.prop file, I had the information for the Xperia Arc instead of the Xperia Arc S. I changed some of the info to the Arc S, like LT18i instead of LT15i. But I'm not sure if I changed everything correctly and can upload the build.prop file for the Arc S.

View 3 Replies View Related

General :: Unable To Boot Into CWM With Sanei N10 Tablet

Jan 13, 2013

I am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.

My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.

The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)

I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.

View 1 Replies View Related

General :: Unable To Boot LG Optimus G Into Recovery

Mar 28, 2014

I'm having trouble booting my LG Optimus G into recovery mode. I've rooted the phone and installed ClockworkMod recovery. When I try to boot into recovery, either from the ROMmanager app or by holding Volume Up and Power, it comes up with the LG logo and gives this error: Secure Booting Error! Cause: boot certification verify. It just stays like that until I press and hold the power button again until the phone shuts off entirely. Then I'm able to boot into the stock operating system and the phone works fine, but I can never get it to boot into recovery.

The error I mentioned above seems to be a well documented error on the internet, but it seems like other people that are having the trouble are completely bricking their phones. Mine is able to come out of it. All the solutions I'm finding pertain to a phone that's completely bricked and involve taking the phone back to stock. My phone works fine with the stock ROM, but I'd like to play with some custom ROM's.

View 2 Replies View Related

General :: Unable To Boot / Can't Have Partition Outside Disk

Feb 1, 2013

i'm having trouble to boot my desire S..i tried to install some new roms, but something web wrong: usualy i had the following partitions:

/dev/block/mmmblck0p25 -> cache
/dev/block/mmmblck0p26 -> system
/dev/block/mmmblck0p27 -> data

al of them ext3, but now if i log in with adb i'm able to mount anoteher partition /dev/block/mmmblck0p28 -> witch in some point was montend on /system/lib and is ext4

now if i adb shell: parted /dev/block/mmcblck0 i becom the error: Can't have a partition outside the disk.my asumtion is that some rom flashing wrote somting were it shoudn't. if i format using fastboot, (i'm not sure if this is posible www_ omappedia.com/wiki/Android_eMMC_Booting ) i'm preaty sure i'm formating also x-load and bootloader.

View 1 Replies View Related

General :: Unable To Boot Into Fastboot Mode On Nexus 10

Nov 28, 2012

I have tried holding down the volume buttons and power button several times the past three days and nothing. The device vibrates and nothing happens. If I continue to hold the buttons then it vibrates every 6-7 seconds. I also tried to get into fastboot using a toolkit in our development section with no luck. The toolkit says I'm in fastboot when connected, but nothing is on my screen.

At this point I am at a complete loss. If I can't get it to work is that a valid reason for replacement by Google?

View 5 Replies View Related

General :: Unable To Boot Into Recovery On Karbonn A111

Jun 24, 2013

I am using Karbonn a111, I have rooted it and then i was trying to flash CWM recovery uning mobile uncle tool. but its was not able to do this , every time it booted into stock recovery.

Then i tried to flash "CWM5.0.2.8recovery " using fastboot. After that my phone stopped to boot into recovery mode. Even my phone is not allowing to do phone reset in phone setting. How to rectify it and how to install CWM recovery.

View 2 Replies View Related

General :: Shutdown Makes Phone Unable To Boot Without PC

Jan 21, 2013

After unlocking my phone's bootloader and flashing the kernel:

When I power off the phone, it gets into a state where I cannot control it by itself (black screen, no charging light if connected to a power source, does not react in any way to any key).

However, I am able to access it via adb over USB. Using adb, I can put it into some other state (reboot, reboot bootloader, etc) and again gain control over it (also through its own keys). When I select the "power off" function of the bootloader, it enters this state again.

I can even reboot the phone (also into recovery/bootloader/fastboot) from any state

So I can use the phone, but I can't power it on by itself, which isn't a good situation when I don't have a computer around.

device: HTC One S
ROM: CyanogenMod 10 (device is officially supported by CM10; I used the version I found in the Wiki.)
kernel: The one included in CM10 (had to be flashed manually via fastboot because of restrictions by the device; I flashed the kernel before flashing the ROM)

View 9 Replies View Related

General :: Ainol Novo 7 Paladin - Unable To Boot And Recover

Mar 12, 2012

i have problem with my Novo 7 Paladin. One week ago i installed Google Maps update. After that my tablet was very strange. Sometimes when it go to sleep it won't wake up. I had to press power on again. Later that week there was some graphical glitch on screen (blinking colors). And now i can't boot at all. So i tried the SD card method to recover system. The problem is that i can't boot. Combination of keys like VOL+ and POWER or VOL+ and RESET doesn't work. Then i tried the original USB Boot Tool from Ainol. This tool doesn't work either.

USB Boot Tool

1) install correct USB drivers (press VOL+ and plug USB) select drivers from tool/drivers/4770

2) unplug USB and start USBBootTool.exe

3) press VOL- and plug USB

4) it says BOOT... please waite0% (attachment boottool.JPG)

5) after some time of waiting the error apears (attachment boottool2.JPG)

View 8 Replies View Related

General :: Unable To Boot In Recovery Mode - Sony Ericsson X10 Mini

Mar 19, 2012

I am using sony ericsson x10 mini mobile phone. I want to install custom ROM cyanogen 7 gingerbread. But I am facing problem while booting this in recovery mode. I have tried the following.

downloaded custom rom for xperia mini and copied in to sdcard

installed ROM Manager Premium (not purchased, downloaded from google search and it is working fine)

installed root explorer S1 tool

Rooted from superoneclick

downloaded xRecovery and copied into system folder

Flash tool - showing bootloader unlocked, and dont know how to flash phone.

msm7227 - used for unlock boot loader

I have rooted my phone successfully, all above things did successfully, when i am trying to boot my phone into recovery mode then it is not boot in that mode instead it boots in normal mode. What I am doing when phone starts and sonyericcson appears then i continuously pushing button many times but it boots in normal mode. So what I have to do to boot my phone in recovery mode. I have read and tried many guides in your forum but nothing works.

View 7 Replies View Related

General :: Can't Boot Device After Replacing System File?

Mar 24, 2014

i was trying to change the background for my x'pop 5035D cause i'm in jelly bean 4.1.1 and all the backgrounds for the system is white and it's very bad for my eyes specially at night ,

i was trying to modify framework-res.apk that exist in :system / framework but i couldn't so i thought i can replace it and i downloaded another frame work- res.apk and i used root explorer to replace it after taking a copy of the original file and since i did that the device restarted and stuck at the logo and i can't boot.

i tried every thing , i did nandroid restore and even wipe data / factory reset and the same result it just stops at the logo every time .

View 1 Replies View Related

General :: Android Won't Boot After Modifying System File

Sep 28, 2013

I have a HUAWEI Y300-0100, and it comes with a funny feature: every time it can't connect to WIFI a popup message appears saying that if you switch to data plan charges may apply.

I am constantly switching between WIFI/no-WIFI zones so that message really bothered me, and I searched a way to disable it.

Presumably, the only way to do that is by modifying a system file called "build.prop". I already had my phone rooted so doing so wasn't very hard.I used Jota+ to change a setting from "true" to "false" (ro.config.hw******), and saved the file in the root of the SD card. Then, with ES File Explorer, I renamed the "build.prop" in /system to "build.prop.bak" and copied there the "build.prop" I previously saved in the SD root.All seemed to be fine, except that after rebooting my phone it could not get past the HUAWEI logo.

Android recovery mode seems to work, but I don't know how to use a lot of its options nor I want to do a Factory Reset if there's a better alternative.Is there a way to modify system files before booting Android? I really would like to try to delete the "build.prop" file and rename the "build.prop.bak" back to "build.prop".

View 6 Replies View Related

General :: Boot Animation - How To Make Flashable Zip File

Oct 11, 2013

Making boot animation? I need to know how to make the flashable zip file I already have the images created

I need them optimized as well, not sure what tool is needed or how to make it? Its for the SG4.

View 2 Replies View Related

General :: Unable To Read Input File

Jul 20, 2013

i tried to create the odin ready pack of stock rom of galaxy y duos lite but splitfus is not supported for my cell phone. create the odin ready pack for S5302.. i am getting an error that unable to read the input file..

View 3 Replies View Related

General :: Boot System File To Switch MicroSD Mount With Internal Memory?

Jul 3, 2013

A long time ago I had edited a file that is read on boot, in that file is written which one of the two 'partition' has to be mounted as what.

Basically, my 32GB microsd is seen as the internal memory of the device (which would be 12 GB), and the other one as micro sd. The result is that most application would go to the microsd by default, using thus 32GB for apps instead of 12GB.

This is because my microsd is failing. Changed with a new one, and now it is failing again. I suppose my phone has become a 'micro sd destroyer'. Cannot do anything about it, so better to use the internal memory instead of the card for main use..... So how do I switch back to normal mounting (micro sd as micro sd and internal memory as internal memory and not switched up) ?

View 2 Replies View Related

General :: Unable To Locate Kernel File In Stock Rom

Mar 20, 2013

I am trying to make a port of my phone to cm9.

But there's some problems

-I am unable to locate the kernel file in my stock rom
-The phone doesn't start bbot animation -It show the first logo, the second and keep stuck- I can't have a logcat.

Note : I haven't bricked it, i can start cwm.

View 4 Replies View Related

General :: Iconia B1-711- Unable To Find Any Firmware Zip File

Jan 26, 2014

I'm stuck inside a bootloop after rooting my Device , The system.img.gz I applied, wasn't suiting to my firmware version , I have tablet Iconia B1-711

I cannot find any firmware zip file.

View 2 Replies View Related

General :: Unable To Chmod Read-only File System

Jun 8, 2012

i've rooted my vodafone 858 but it didn't install super user although i can type "su" command in adb shell. now i'm trying to delete files located in /mnt/asec (downloaded packages) due to low phone memory. so i tried to do it but when i do the command "rm" for files located in there it tells me permission denied so i entered super user mode and i tried "rm" it tells me "unable to chmod <path> read-only file system" so how can i get past the read only?

View 2 Replies View Related

Nexus :: 2.1 To 2.2 Manual Install From A Weird Build / Unable To Get Started?

Jul 26, 2010

I noticed that in order to update your nexus one you need to either use OTA updates or download that zip archive, drop into sd card and boot in recovery mode but they have not worked for me.

The thing is, i have a weird build number and i think thats why it wont let me update it.
passion-userdebug 2.1 ERD72 22132 test-keys
Thats what i got, and i cant update it normally. Anyone know where i cant get started?

inb4 use search function, used it, nothing related to updating from my build, ive searched other forums too, nada...

View 9 Replies View Related

Android :: Ant Build File ?

Sep 8, 2010

I need to write ant build file for my project. Do anyone have an idea about how to write ant build file for android.

View 3 Replies View Related

General :: Unable To Install ES File Manager Via Play Store?

Sep 13, 2013

I am getting this error during installation time

unknown error code during application install -24

I cleared cache abd defaults if play store but still the issue persist.

View 2 Replies View Related

Android :: Unable To Play File When Set Data Source To Sd Card File

Apr 13, 2009

I am trying to play file which is stored in SDCARD in emulator. I have Linux O/S. So i need to provide command in run configuration. I am providing following parameter.

-sdcard /usr/android/sdcard/mysdcard.iso -audio oss [i]

The following is my code to play file.

try { mMediaPlayer.setDataSource("/sdcard/test_cbr.mp3"); mMediaPlayer.prepare(); // Giving error. mMediaPlayer.start(); }

View 4 Replies View Related

Android :: Unable To Build Browser Source Code On Droid-sdk-windows-1.0_r1 / Get It?

Jan 29, 2009

I am trying to build the Browser source code downloaded from the http://android.git.kernel.org/ site with android-sdk-windows-1.0_r1. I am getting a lot of compilation errors and it seems that many classes are missing in 1.0 which are being used by the Browser.

I am stuck into this and not able to figure a way out. Let me know if I am missing anything. Waiting desperately 4 a reply.

View 2 Replies View Related

Android :: Generated Build File Fails?

Apr 15, 2010

Building our Android app from Ant fails with this error:

[apply]
[apply] UNEXPECTED TOP-LEVEL ERROR:
[apply] java.lang.OutOfMemoryError: Java heap space
[apply] at java.util.HashMap.<init>(HashMap.java:209)
[apply] at java.util.HashSet.<init>(HashSet.java:86)
[apply] at com.android.dx.ssa.Dominators.compress(Dominators.java:96)
[apply] at com.android.dx.ssa.Dominators.eval(Dominators.java:132)
[apply] at com.android.dx.ssa.Dominators.run(Dominators.java:213)
[apply] at com.android.dx.ssa.DomFront.run(DomFront.java:84)
[apply] at com.android.dx.ssa.SsaConverter.placePhiFunctions(SsaConverter.java:265)
[apply] at com.android.dx.ssa.SsaConverter.convertToSsaMethod(SsaConverter.java:51)
[apply] at com.android.dx.ssa.Optimizer.optimize(Optimizer.java:100)
[apply] at com.android.dx.ssa.Optimizer.optimize(Optimizer.java:74)
[apply] at com.android.dx.dex.cf.CfTranslator.processMethods(CfTranslator.java:269)
[apply] at com.android.dx.dex.cf.CfTranslator.translate0(CfTranslator.java:131)
[apply] at com.android.dx.dex.cf.CfTranslator.translate(CfTranslator.java:85)
[apply] at com.android.dx.command.dexer.Main.processClass(Main.java:297)
[apply] at com.android.dx.command.dexer.Main.processFileBytes(Main.java:276)
[apply] at com.android.dx.command.dexer.Main.access$100(Main.java:56)
[apply] at com.android.dx.command.dexer.Main$1.processFileBytes(Main.java:228)
[apply] at com.android.dx.cf.direct.ClassPathOpener.processArchive(ClassPathOpener.java:245)
[apply] at com.android.dx.cf.direct.ClassPathOpener.processOne(ClassPathOpener.java:130)
[apply] at com.android.dx.cf.direct.ClassPathOpener.process(ClassPathOpener.java:108)
[apply] at com.android.dx.command.dexer.Main.processOne(Main.java:245)
[apply] at com.android.dx.command.dexer.Main.processAllFiles(Main.java:183)
[apply] at com.android.dx.command.dexer.Main.run(Main.java:139)
[apply] at com.android.dx.command.dexer.Main.main(Main.java:120)
[apply] at com.android.dx.command.Main.main(Main.java:87)

BUILD FAILED

Ive tried giving Ant more memory by setting ANT_OPTS="-Xms256m -Xmx512m". (This build machine has 1Gb RAM). Do I just need more memory or is there anything else I can try?

View 4 Replies View Related

Android :: Build APK File From Command Line

Sep 28, 2009

I want to build the .apk file from java binary file (.class) or .dex file. I have copied the bin+res folder and Manifest.xml file to a specified folder. and run the command :[apkbuilder.bat %FILE_NAME% -rf "./src_folderr"]. This command build the new .APK file with default keystore. But I want to build the APK with me generated keystore, with command line as this :[apkbuilder.bat %FILE_NAME% -rf "./src_folder" -storetype path_to_my_release_keystore.keystore] but it can not find my keystore with "java.security.KeyStoreException : release.keystore not found". How can I build APK file with my keystore file?

View 12 Replies View Related

Android :: Can I Include Jar File Build Using SUN JDK In Droid App

Aug 30, 2010

Use adb logcat, DDMS, or the DDMS perspective in Eclipse to look at LogCat and examine the stack trace associated with your error.

- Hide quoted text -

View 2 Replies View Related

Android :: Build .apk File From Windows Command Line?

Sep 30, 2010

How can I build and signed (keystore) the .apk file using 'apkbuilder.bat' via windows command-line? I try to run the following line: apkbuilder.bat %APK_File_Name% -u -z %Project_Path%in esources.ap_ -f %Project_Path%inclasses.dex -rf %Project_Path%. But I'm getting the following exception: java.lang.ArrayIndexOutOfBoundsException: 1 at com.android.sdklib.build.ApkBuilderMain.main<ApkBuilderMain.java:61>.

View 2 Replies View Related

Android :: Generate Build.xml File From Command Line Using Ant

Nov 2, 2010

I've installed Ant. From an existing Eclipse project I am able to generate the build.xml file from the command line using ant -update project. When I now try ant release I get this error: build.xml:65: java.lang.NullPointerException. This project builds fine under Eclipse. I have no idea where to even begin to figure this out. I wouldn't bother with this except that I need to use ProGuard later on (which I have not done yet).

View 1 Replies View Related

Android :: ADT Plugin Automatically Create An Ant Build File?

Mar 17, 2010

I created an Android project a few months ago and now have to automate the build process with Hudson. The Android dev guide mentions a build.xml file that gets created when you generate a project (http://developer.android.com/guide/developing/other-ide.html) but I dont see one in my project. Will I have to create this by hand or can I run a command to generate it?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved