Android :: Windows XP USB Driver - DROID - Hero - Tattoo
Nov 9, 2009
At the Google Android Developer Lab event today I had the opportunity to try out a series of devices but was somewhat limited due to issues I had with the USB drivers for the XP/SP2 notebook I brought along. (Yeah I know) In the past, I've had no problem with the G1 or Google Ion, but the Motorola DROID, HTC Hero, Tattoo and a few others did not work, i.e. were not, or only partially visible. Before you ask, this problem persisted after updating the XP USB drivers to the latest _r2.
Has anybody successfully connected devices outside of the G1 and Google Ion on XP? Any tips?
After having been one of the more vocal complainers about the lack of devices available for developers, I've followed the moral imperative once this opportunity was provided by Google. Big thanks to the team at Google for filling this gap.
View 4 Replies
Mar 5, 2010
Unlike some others, my Android SDK setup went smoothly on my new Windows 7 Pro 64 bit machine. However, I am currently hung up on installing the android usb drivers. What is the current state of this issue? There has been some discussion of this problem on the web but no consensus is immediately apparent.
View 2 Replies
View Related
Aug 9, 2009
I cannot get windows to install the SDK drivers instead of its preloaded disk drivers. I have tried to do a manual update from the device manager, but windows believes it knows better and says the best drivers are already installed. I also tried to shut of the automatic driver installation through the system settings but it still installs its own drivers. This is getting extremely frustrating, when i run adb it says that there is no device connected.
View 3 Replies
View Related
Sep 23, 2010
For some reason my windows 7 64 don't recognize the driver r3. Does anybody have this problem?
View 5 Replies
View Related
Nov 4, 2010
I have implemented a simple Android application that I now would like to test on a real device. I have a Nexus One. In the Android Eclipse plugin, I have downloaded and installed the USB driver (revision 3) package. But when I connect my Nexus One to my PC (running Windows 7) using the USB cable, a message box pops up and shows that "No driver found" for "Nexus One". I have activated USB Debugging on my device. And when I run adb devices on my PC, it just prints List of devices attached and no devices are listed. And if I use Device Manages in Windows, and tries to update the driver for "Nexus One", I can not select a driver in the "driver directory" of Android SDK. How can I install a driver for Nexus One on Windows 7 so I can use it for USB debugging my Android applications on a real device?
View 3 Replies
View Related
Jan 6, 2010
I've been using my G1 under Windows 7 64-bit and Eclipse just fine.
However, when using my new Nexus One instead - and making sure that 'Use Debugging' is enabled - the Nexus One is not recognized and debugging on this phone is not possible.
Usig the Nexus One as a removable-drive (by mounting it) works fine.
How can I start using the Nexus one as a development device (on Eclipse)?
View 10 Replies
View Related
Jan 18, 2010
I know that Google elected Windows XP (eXtra Problems) to be the minimum operating system, but was anyone here able to run it on win2k? Being able to run the emulator OR install the native driver (to debug in the device) would be enough. I really would not like to have to buy a new computer just because of android. Since I already work with many other platforms without problems.
View 11 Replies
View Related
Dec 26, 2009
Can you please advise if development tools Eclipse, Android sdk, usb driver etc. are working properly under Windows 7 32 and 64 bit?
View 10 Replies
View Related
Apr 4, 2013
Micromax does not provide any drivers for its phone - Micromax ninja a89. We are trying to use the phone for development and are unable to install device driver in windows 8.
We tried the adb drivers at - [URL] and got the error - Windows found driver software for your device but encountered an error when trying to install it. Android ADB INterface- The system cannot find the file specified.
We even tried this link - [URL] But that does not solve the problem. How do we install adb driver for micromax a89? Is there any other workaround to use the phone as a development device?
View 2 Replies
View Related
Jan 3, 2014
Now I'm using ICS 4.0.4. Flashed by walton customer service.but i can't flash cwm. pc is not getting my device. i think it's driver problem. i tried many ways, but no progress. windows 7 64 bit.
View 2 Replies
View Related
Aug 7, 2010
Until now, have been using Android SDKs Emulator with the Eclipse plug-in, but recently replaced my non-Android phone to T-Mobile's MyTouch 3G Slide. Today, tried to install the Windows Android USB Driver for the phone. Followed instructions in http://d.android.com/sdk/win-usb.html (USB Driver for Windows Android Developers).
When looking for the driver, Windows gave me a "Could Not Find Driver Software" message. When telling Windows where to search, I pointed it to the SDK directory where the driver resides (¦Android-SDK-windows/ usb_driver). Also tried ¦Android-SDK-windows. Specified use sub- folders" in both tries. I am using Vista 64 bit, and suspect that may be the cause.
The "could not find.." message box from Windows has this information under Details:
Problem Event Name: PnPDriverNotFound Architecture: x64 Hardware Id: USBVID_0BB4&PID_0E03&REV_0100&MI_01 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033
In Windows Device Manager, "Other Devices ==>ADB==> Properties" shows Device type: Other Devices Manufacturer: Unknown Location: 0000.001d.0007.002.000.000.000.000.000 Device Status: This device is not configured correctly. (Code 1). There is no driver selected for the device information set or element
In the sdk's "usb_driver" directory, the "android_winusb.inf" file has several VID's beginning with 0BB..., but does not have one for the one listed above. Nor is there a [ ... ]header entry for the MyTouch 3G Slide (Expresso?)
I suspect this is the reason for the "Driver not found"
Am using the 32 bit version of "Eclipse IDE for Java Developers" downloaded last April. (At that time there were a lot of forum warnings about not using the 64 bit version.)
Today, before trying to install the driver, I uninstalled the Android plug-in from Eclipse and then uninstalled the Android SDK I had installed in April which was at the 2.1 level. I reinstalled the SDK at the 2.2 level taking "all items". Then reinstalled the Eclipse plug- in.
In the "Android SDK and AVD Manager" checked for any updates. There were none (I'd just re-installed, so that makes sense)
Information in this thread looked like a solution:
[url]
When I tried that, got the same message box.
These two threads from 2009 have entries that say the 64 bit driver is in the SDK I cant find it. Could be looking the wrong place though.
[url]
[url]
The android_winusb.inf has these two .CAT entries in it CatalogFile.NTx86 = androidwinusb86.cat CatalogFile.NTamd64 = androidwinusba64.cat
Using the information from the above ¦5512 thread, I added these lines to the [Google.NTx86] group immediately following the ";Google NexusOne" information and before the [Google.NTamd64] entry
CODE:.................................
When that did not make any difference, added: %SingleBootLoaderInterface% = USB_Install, USBVID_0BB4&PID_0FFF which was also part of a post. Made no difference
The .INF has a [ClassInstall32], entry, but there is no [ClassInstall64] entry. I do not know enough about INFs to know if that is needed or not.
View 2 Replies
View Related
May 5, 2010
I cannot find it anywhere.can anyone shed some light on where i can get a driver for windows 7 so i can root my behold 2?
View 1 Replies
View Related
Sep 30, 2010
I have a new Captivate and am attempting to establish a USB connection with Windows XP sp2.
I have downloaded setup two different USB drivers, (1) from Samsung--I assume it's the official driver, and (2) from the Android SDK. Both installations ran without error. But when I attempt to install either driver, Windows complains that it cannot locate the driver. I'm at a loss.
Windows is finds the Captivate when connected but only intermittently. Sometimes it identifies it and sometimes it doesn't.
View 1 Replies
View Related
Sep 10, 2013
I want to connect my CS-918 Android TV Box to my Pc.I have Win 7 64Bit. I download the Rockusb_v3.5 drivers, in the device i set the USB Debug mode, When i connect the USB cable, In the Windows Device Maneger it recognize as CS918. I tried another cable and the same....Then i click 'Update Driver' select the path of the 'Rockusb' but it does not installing it.
View 3 Replies
View Related
May 29, 2012
Where I can get the device driver for the Ampe A10 10.1" tablet.
Windows 7 x64 detects a device called "Android" when you connect the tablet and says no driver found.
The tablet does not appear on the device chooser in the eclipse development environment.
View 2 Replies
View Related
Apr 19, 2010
No matter how many times I reinstall the device drivers, they all install correctly besides the Android ADB Device driver.
View 4 Replies
View Related
Jan 8, 2010
That's what I want to know. If yes - awesome, if no - who can we "request" to root that thing?!? If maybe - what are the risks I'm running into?How can I aver those risks? Backup? System Restore? What are my options.
View 1 Replies
View Related
Jul 28, 2010
Umm first time I tried hooking my Captivate up to my computer, and It says "device driver software unsuccessfully installed..
View 3 Replies
View Related
May 21, 2010
I have had DC 2.08.1 installed for about 2 weeks with no issues. I decided to go ahead and partition the SD to utilized apps2SD as I was having memory issues. That process, while not smooth, went through okay and the SD card is working with the partition and apps2SD. However, ever since that was completed, my Windows 7 box no longer recognizes the phone either as a phone or as a drive. My Linux laptop recognizes the drive without issue.
Any suggestions on how I can reintroduce my phone to the Windows box, at least as a drive?
View 2 Replies
View Related
Aug 8, 2010
my newly bought Tattoo became unbootable a few days ago.It worked perfectly fine two days ago, then it started to randomly reboot itself, but after that, it became completely unbootable, as in, it was stuck at the "TATTOO" screen. The phone internals are completely untouched, no custom images, not rooted, no nothing, it's factory fresh.The battery is full too, and I didn't install anything that could possibly have corrupted the bootloader (or whatever is failing to load).I already tried to wipe the user data _TWICE_ (using HOME + BACK + POWER) with no success. I'm also perfectly able to get into HBOOT (using VOLDOWN + MENU + POWER), and connect via usb (using "FASTBOOT USB" from HBOOT). However, I can't completely wipe the cache with fastboot.exe from the android-sdk, since it doesn't allow it: "erasing 'cache'... FAILED (remote: not allow)".
View 7 Replies
View Related
May 27, 2010
In case anyone else is having problems getting their Incredible to connect, the easiest way I found to install the USB drivers are with the HTC sync program here:
http://member.america.htc.com/download/Driver/DROID_INCREDIBLE_Verizon/HTC_Sync_2.0.33.exe
The google SDK driver doesn't yet work with the Incredible, and though it can be hacked - this download might be easier for some.
View 3 Replies
View Related
Nov 8, 2009
When i try and root my Hero my computer is unable to install the ADB driver needed to perform these tasks. I've followed the instructions from this website with no luck. Any ideas?? I'm running w7, dont know if that has anything to do with it.
View 1 Replies
View Related
Jan 31, 2010
I go to plug my phone into my computer and mount it and then I get a message on my computer asking do I want to scan the driver, When I click yes it does nothing, and then When I go to my computer to click my Hero Vista wont let me it says please insert a disk. If I click Continue without scanning I am able to get into the Hero. Whats going on here?
View 3 Replies
View Related
Dec 5, 2009
I'm pretty sure this is not a hardware issue...
If I hard-reset my phone, the compass will work flawlessly for about 3-5 days. After that it fails to function. It stays locked in one position and if it does move it is VERY sparatic.
This has been tested with multiple compass apps as well as any of the "augmented" reality apps (sky maps, Layer, etc)
This has happened with both COMPLETELY factory un-rooted phone as well as now that I'm rooted running Madoco Unofficial 1.2c.
If I do a hard reset it works fine. Its not any particular app doing it either. I've tested that theory.
View 1 Replies
View Related
Jan 2, 2010
How to connect my phone so i could download picture,music....and all like this to my phone ?
View 1 Replies
View Related
Oct 1, 2010
The driver works - but after a few sessions it's in la la land.
For example i can't download apps via eclipse and also cannot mount - if mounted cannot access drive. reboot and works for a few sessions - and same again. i've got rev3.
View 2 Replies
View Related
Nov 13, 2009
I need a video player for the tattoo that can play mpegs / wma's - cant find anything on market - any ideas.
View 13 Replies
View Related
Nov 30, 2009
When I drag it over to the card it goes on but then I can't find it on my phone. Do I need an app or something or a program to do it.
View 6 Replies
View Related
Apr 15, 2010
How much of micro SD card capacity thats tattoo can handle ? does tattoo can handle 16Gb/32Gb SDCard?
View 4 Replies
View Related
Jan 31, 2010
I am using Tata Docomo on my HTC Tattoo. Just want to confirm if tata docomo gprs works on tattoo.I Asked Tata people to send the gprs settings, but anyhow i am not receiving it.I tried to add manually, but didn't worked.
View 23 Replies
View Related