how can i stop the index-alpahbtical section or the scrolling-bar when i start search using edittext. i used Intent to pass the value of edittext to the scrolling class and check if not empty scrolling.hide() ,but i got error massge and can't work,
View 3 Replies
Our app (WordPress for Android) uses a ScrollView for the new blog post view. The issue is that if a user writes a lengthy blog post in the EditText, they are unable to scroll inside of the EditText because the ScrollView seems to be taking over the scrolling action, even when you are in the EditText.
Here's the layout XML (the EditText in question is @id/content):
CODE:...............
I'm writing a simple caesar-encryption-activity. Two EditTexts on screen, one clear-text, one crypted.
Here's an example for the crypted EditText - the cleartext one is similar.
CODE:...................
Now when entering cleartext I have an TextChangedListener running that programatically crypts and fills that crypto-EditText. So far, so good.
When the cleartext entered gets really long, the cleartext-EditText scrolls with my imput, but the crypto-EditText stays at the top of the text. I'd really like the crypto-EditText to scroll so that it always shows the bottom line of its content.
How can that be done, preferably from the onTextChanged()-Method of the TextWatcher?
Our app (WordPress for Android) uses a scrollview for the new post view, where a user enters in their new blog post. There's quite a few fields on this view, including a large EditText for the post content field.
It appears that when an EditText is in a ScrollView, the ScrollView takes over the scrolling action, so the user can't scroll within the EditText area if they are writing a large post. What can be done so that scrolling will work both within the EditText and the ScrollView?
Here is the layout xml for this view, The EditText that needs the scrolling is @id/content:
CODE:.....................
I am trying to make a non-editable EditText that is placed in a ScrollView and scrolling is controlled programmatically (when a left/right fling is detected).
Here's my simple layout:
CODE:..........
And here is my simple program:
CODE:.............
So, to explain it simply, I have two custom simplegesture classes that I attached to the EditText and the ScrollView. For the EditText, I'm trying to detect a left/right fling and when detected, I'm scrolling the it up 1 page up/down. The custom simplegesture attached to the ScrollView is to disable finger scrolling.
Here's a screen shot after a right fling was done: http://img830.imageshack.us/i/textcut.png/
I kinda works right now but I have two questions:
How do I control the scroll so that lines won't get "cut-off" (please refer to the picture above where the first line on the screen is a bit "cuf-off"). Why when I scroll the page up/down programmatically, the EditText is auto select-all (please refer to the picture above where the whole screen turns orange after scrolling)? Why when I changed MyGestureDetector to detect fling on the Y-axis (vertical fling) and programmatically scroll the EditText, it doesnt' work? It wouldn't work even if I made the change in ScrollGestureDetector too. Does it have something to do with the behaviour of the ScrollView?
In my application i have several activities and i want to start background music whenever my *Application* is launched and stop music whenever *Application* is paused or stopped.
View 4 Replies View RelatedI have a long scrolling list of EditText items created by a SimpleCursorAdapter and prepopulated with values from an SQLite database. I make this by: cursor = db.rawQuery("SELECT _id, criterion, localweight, globalweight FROM " + dbTableName + " ORDER BY criterion", null); startManagingCursor(cursor); mAdapter = new SimpleCursorAdapter(this, R.layout.weight_edit_items, cursor, new String[]{"criterion","localweight","globalweight"}, new int[]{R.id.criterion_edit, R.id.localweight_edit, R.id.globalweight_edit}); is.setListAdapter(mAdapter); The scrolling list is several emulator screens long. The items display OK - scrolling through them shows that each has the correct value from the database. I can make an edit change to any of the EditTexts and the new text is accepted and displayed in the box. if I then scroll the list far enough to take the edited item off the screen, when I scroll back to look at it again its value has returned to what it was before I made the changes, ie. my edits have been lost. In trying to sort this out, I've done a getText to look at what's in the EditText after I've done my edits (and before a scroll) and getText returns the original text, even though the EditText is displaying my new text. It seems that the EditText has only accepted my edits superficially and they haven't been bound to the EditText, meaning they get dropped when scrolled off the screen. Can anyone please tell me what's going on here and what I need to do to force the EditText to retain its edits?
View 1 Replies View RelatedI have a small problem. In my activity i have a edittext and button. Clicking on button I am changing the inputtype of the edittext. Now whats when i click button the input type changes but the cursor goes to the begining of the text in edittext. Can i retain the same position of the cursor or can i bring the cursor to the end of the text.
View 1 Replies View RelatedI have a scenario, where I have three buttons(like tabs) and when clicking on each button, I am showing a listView, such that, I select one button and scroll the listView. During scrolling if I click on any other button, that list is also continue scrolling. Actually, I don't want the scrolling
When I click on any other button, it should not scroll and it should be in the starting position(means index 0).
I tried onScrollChangeListener(), in that onScrollStateChanged() is there.
I tried putting setSelection(0) in SCROLL_STATE_FLING & SCROLL_STATE_SCROLL state.
Its going to index zero, but continue from there, its still scrolling. How can I stop this scrolling.
I loaded some images into a gallery. Now I'm able to scroll but once started scrolling the scrolling won't stop. I would like the gallery to just scroll to the next image and then stop until the user does the scroll gesture again.
This is my code
CODE:.............
And the xmlLayout file
CODE:..................
Anyone know a way (or app) to stop the scrolling wallpaper? Even if I put a photo on my phone at the right resolution for the screen, it makes me crop it to fit the phone for home screen scrolling. Sometimes I like that, but sometimes I just want the apps/widgets to pull over without the picture moving.
View 2 Replies View RelatedI have already posted my query here, but unfortunately, not getting the required support for this simple query.
I am using a progressbar widget in my application to show the download progress.
In the current state, I am able to manually move the slider back and forth while download is progressing. How can I prevent the manual moving of progressbar, instead it works only based on
progressbar.setProgress(progressbar.getProgress() + 1024); -- currently this works perfect, but I need to prevent the manual moving of progressbar during download.
Has anyone noticed this? Almost every time I have the mobile network on, when on a browser page (Skyfire) or reading Newsrob articles it keeps jumping or scrolling from link to link, and fights me when I try and scroll back, like it's trying to help me see the links or something...!
I'm on a Hero 1.5 (was locked to Orange, now on O2, about to get the 2.1 upgrade I THINK)
I don't think this is a particularly useful feature...
As a work around to the issue where a list item isn't focusable if it has a focusable child item (a comment by Romain Guy was that this was intended behavior, for accessibility reasons) I simply filled the listItem with two children, each of which is focusable - There's nowhere to directly touch on the listItem anymore, just it's children.
For the most part this is a useable workaround, effectively invisible to the user, except for one thing- Although you can scroll by swiping without issue, touching to *stop* the scroll no longer works- I imagine because the child item is capturing the touch event and not passing it to the parent listitem, at least while the scroll is in effect.
Is there a known workaround for this? Perhaps someway to "pass the baton" of the touch event back up to the parent listItem, or a way to change my design?
BTW- I know there's some built-in functonality for single/multiple choice listviews (checkbox listviews) - That doesn't actually help in my case. The app is a contact list, and the row children are a relativelayout (populated with contact info) and a clickable phone icon (a one-touch dial for the contact), which needs to be visible or invisible depending on whether the stored contact has a phone number.
Can anyone help with a problem I have? I created an activity (extending a list activity) and have it populating with a list of peoples names, however when I scroll up or down it automatically greys out the whole list view until you stop scrolling. Is it possible to stop this greying out from happening? I have attached an screenshot in case my description doesnt make sense. Code...
View 4 Replies View RelatedIs there any way, with root access, to change the search button to make it bring up the camera app instead of the search app? i have never used the search feature, nor do i plan too, however i use the camera quite a bit and would like to have instant (well, close too) access to it. *just to verify, i am talking about the hardware, led backlit, search button...obviously not the onscreen search button...just wanted to be 100% clear
View 2 Replies View RelatedBy default, if we long press search key it opens quick search box with the keypad slided up. what should be done if I want to change this default action to launching of an application when ever search key is long pressed. This obliviously requires changes in the framework. i tried changing some code in Search dialog.Java file but we can't use Start Activity there. pls guide.
View 2 Replies View Related1. press home key to stop my AP (activity change to stop , not destroy )
2. use "CountDownTimer" for sleep 3 secs , when timer finish use sendBroadcast() to call my BroadcastReceiver
3. finally , BroadcastReceiver use intent to start my AP (activity change to start).
There seems to be a lot of useless stuff opening on startup, not all "apps" necessarily... is there a way to stop this stuff from starting? I love the phone but it blows my mind that there are so many apps that you can't even quit without dl'ing a task killer.
View 5 Replies View RelatedIf I Force Stop an app (via Settings->Applications->Manage Applications->Any App->Force Stop) will the app ever start up automatically again or is the only way to start it up again to have the user start it. I have an app that starts a service. The service registers an alarm I've defined, with the Alarm Manager and this is recieved as expected. In my manifest I've defined a TimerIntentReceiver, to receive that alarm I've defined. If I Force Stop the app then is it possible to have the Alarm Manager "wake" my app up via the TimerIntentReceiver I've defined. I'm not seeing this happen. Once I Force Stop my app it never runs again unless I manually start it. Is there anything I can listen for, apart from BOOT_COMPLETE, to start up my app? Or does the user always have to start all apps.
View 2 Replies View RelatedI would like to start MyActivity class when the user clicks on the search button on the handset.
Are there any strategies you can suggest for this? Any code examples would be very useful.
I'm playing around with the MediaPlayer class to reproduce some sounds/music. I am playing raw resources (res/raw) and it looks kind of easy.
To play a raw resource, the MediaPlayer has to be initialized like this:
CODE:.................
Until here there is no problem. The sound is played, and everything works fine. My problem appears when I want to add more options to my application. Specifically when I add the "Stop" button/option.
Basically, what I want to do is...when I press "Stop", the music stops. And when I press "Start", the song/sound starts over. (pretty basic!)
To stop the media player, you only have to call stop(). But to play the sound again, the media player has to be reseted and prepared.
CODE:...............
The problem is that the method setDataSource() only accepts as params a file path, Content Provider URI, streaming media URL path, or File Descriptor.
So, since this method doesn't accept a resource identifier, I don't know how to set the data source in order to call prepare(). In addition, I don't understand why you can't use a Resouce identifier to set the data source, but you can use a resource identifier when initializing the MediaPlayer.
I guess that I'm missing something. I wonder if I am mixing concepts, and the method stop() doesn't have to be called in the "Stop" button.
I want to stop and start tasker by itself via a bashscript since I see no other way to do so. This works if you put in terminal line by line:
Code:
am force-stop net.dinglisch.android.taskerm
am start -a android.intent.action.MAIN -n net.dinglisch.android.taskerm/net.dinglisch.android.taskerm.Tasker
killall net.dinglisch.android.taskerm
But now I'm stock
My guess was that it would have to work if i put in a file "kst.sh" and run
Code:
sh ./kst.sh
as root.
But it doesn't work and it seems to ignore the linebreaks in the file.
So here I am, knowing the commands and need to run them with one call. How do I do that?
I have a debranded Desire, originally sold by Telus in Canada, which I updated to Froyo using the instructions on this site. Everything works fine except that all google search results post UK based urls, rather than US and local search results. I have Google settings to remember my location but I cannot figure out to stop this from happening. It happens using the google search button or when using a bookmarked google web page.
View 5 Replies View RelatedI want to use GPS service for better accuracy in my program, but want the location only once in every couple of hours. To get GPS location the GPS had to be started already manually through Settings->Location Security->Use GPS Satellites. But the problem is GPS continuously running whether I need the location or not and drains the battery quickly. My question is what is the equivalent API for the checkbox selection of,
View 2 Replies View RelatedI was wondering if I can somehow permanently get rid of some running services that start up on my phone? I'm speaking specifically to the motorola widget ones such as social networking and news that are running even when i haven't signed up for them.
View 7 Replies View RelatedIs there an API, or a registry I can do in the manifest to make sure my service is being run at the device start up and being shut down before the device shuts off?
View 3 Replies View RelatedHow can I start or stop the built-in tethering in Android 2.2 from my application?
View 1 Replies View RelatedCould we, and how start and stop a broadcast receiver receving the android. intent. action. BOOT_COMPLETED?As I want have control on a service awaken by the BOOT_COMPLETED.
View 2 Replies View RelatedI've an App which performs a potentially large download in background thread. When the orientation changes or the keyboard is opened the App lifecycle system invokes the start/stop/pause/resume etc calls - is there any strategy available to resume the download rather than just set a flag so the new onCreate() knows it was interrupted and has to start it again?
View 2 Replies View Related