I kno usually low voltage kernels are ment to save battery but on some phones can it do the opposite cause I'm trying adamz on low and I feel like I'm burning battery faster without even doin anyything on the phone.So could the low voltage kernel be the cause?
View 3 Replies
As usual, these are update.zip format. Rename to update.zip, place on root of sdcard, and install (don't forget to 'allow').
My advice to you, in selecting a kernel, is to #1 try the lowV varieties first. Then select the slowest kernel that exceeds what you expect to run on a day to day basis. So if you plan on running 800-1000, run the 1.0lv kernel.
If for some reason you get stuck on the 'M' while booting, first try switching to the mediumV kernel. If that does not work, back the speed down, say from 1.25 to 1.2, or 1.2, to 1.1, etc.
5-slot Low Voltage
1.0Ghz (125/250/550/800/1000)
1.1Ghz (125/250/550/800/1100)
1.2Ghz (125/250/550/800/1200)
1.25Ghz (125/250/550/800/1250)
5-slot Medium Voltage
1.0Ghz (125/250/550/800/1000)
1.1Ghz (125/250/550/800/1100)
1.2Ghz (125/250/550/800/1200)
1.25Ghz (125/250/550/800/1250)
7-slot Low Voltage
1.0Ghz (125/250/550/700/800/900/1000)
1.1Ghz (125/250/550/800/900/1000/1100)
1.2Ghz (125/250/550/800/1000/1100/1200)
1.25Ghz (125/250/550/800/1000/1100/1250)
7-slot Medium Voltage
1.0Ghz (125/250/550/700/800/900/1000)
1.1Ghz (125/250/550/800/900/1000/1100)
1.2Ghz (125/250/550/800/1000/1100/1200)
1.25Ghz (125/250/550/800/1000/1100/1250)
I am thinking of flashing one of them tonight, but wanted to get some feedback from anyone who has been using them. Does wifi tether work? How stable do they seem? Any strange problems/bugs? Any replies are appreciated.
View 42 Replies View RelatedAfter realizing I can back up e-mail settings and home screens, I updated to the latest Cyogen (just one step). Now I'm putting my kernel back on (Becket) and I noticed there were increased voltage kernels.
I just installed 1.2 low voltage. Hope it runs well.
what is the purpose of a low voltage kernel?
View 3 Replies View RelatedI just installed Cyanogen from DroidMod and while I was at it, I installed the p3 1ghz low voltage kernel. So far, I'm pretty happy. I'm not sure it's been a huuuge battery saver, but I think it's helped. Wifi and bluetooth have been on all day. A few phone calls. Lots of texting and emails. Also some market apps downloaded as well as files transferred on/off. At 8:30 my battery life is at 50%, which is pretty damn good considering how much better that is from strait out of the box on release day.
I'm running 800mhz overclocked, instead of 1ghz to save some power. Should I switch to a different kernel since I'm not even using the 1 ghz slot?
What's the best low voltage kernel for battery life, overclocking included? No need to even bring up stock speeds...
Possibly a simple answer to this question -- can the USB charger that ships with the Droid X be used with 220 volts in addition to 110 volts? I am planning to take my Droid X to India and need to figure out if I should plug the charger into a 110/220V travel converter, or if the USB charger is already dual voltage and I'll only need a plug point adapter. The voltage specified on the charger has 240V as the upper range, which leads me to think it should work with 220V.
View 4 Replies View RelatedAssuming I keep CPU speeds the same as stock, is a low voltage kernel going to save my battery life significantly?
View 6 Replies View RelatedWith all droid dead where can I find Chevy's low voltage kernel?
View 7 Replies View Relatedaccording to the new OC app from (can't remember) anyways playing with the phone, angry birds, radio and browsing facebook I reached temps of 59c. How hot is to hot...?
View 7 Replies View RelatedAmazon.com: Genuine Motorola Droid P323 Battery Charger System: Electronics Amazon.com: Motorola BP6X A855 Droid OEM 1300mah Standard Battery: Cell Phones & Service Anyone use these 2 items from Amazon? I'd like to get a second battery and an external charger, this seems like a cheap solution while keeping OEM parts. The only thing I'm really questioning is the voltage output of the external charger to the battery. Any way to tell if it will charger correctly? If you know the answer, please provide reasoning.
View 8 Replies View RelatedHave been testing kernels the past few days, have a few thoughts:I've tried the Slayher v1.6 kernel, ChevyNo1's ULV, jdflg's, and p3droid's, all 1200mhz. With all kernels set to "on demand", I can't say for sure if any one gives more battery life than any other, my usage is too variable. P3Droid's are 125mhz base clock, while the others are 250 or 300mhz, but there wasn't an obvious difference with my use. I'm guessing at low clocks, processor drain is negligible unless you're going to be in a semi-sleep state for a long time. All kernels bench about the same, and P3Droid's don't feel any slower even with the lower base clock, which suggests to me that most kernel makers should consider including a sub-200mhz option. Kernels with "interactive governor" subjectively feel slightly faster when using interactive governor, but battery life is definitely a little shorter. All kernels seem equally stable. All kernels seem to run about the same temperature, with maybe a very slight edge to Chevy's ULV kernel (~2c loaded). Temperature monitoring is not very accurate. I turned on my phone earlier in class, to see a 13c CPU temp. That's about 8-10c below ambient. This is consistent on all kernels I have tried.
View 2 Replies View RelatedIf I am using one of the OC kernels (the ultra-low Chevy 1.2) is SetCPU necessary? If so under what circumstances?
View 5 Replies View RelatedAlright so i just rooted my phone, I viewed other threads and I couldnt find exactly what I was looking for in simple words. So the question is. I want to install the NexBeast rom. How do i do that?
and how do you install kernels
I have installed Chevy kernels before from the boot.img by plopping it into nandroid and advanced restoring only the boot.img. Always worked fine.Now nothing. Error 25 AdamZ Overclocking Kernel Test Results with Ultimate Droid 6.5 - Droid Forum - Verizon Droid & the Motorola Droid Foruml.
View 19 Replies View RelatedI have read and searched everywhere on how to install custom kernels.I follow each step: download the file, change the name of the file to update.zip, copy file onto root of SD card, boot into recovery, go to install, select "Allow update.zip Installation", install.When it starts to install it pops up "no such file or directory" installation aborted.
View 16 Replies View RelatedI recently finally rooted my Droid, last week. I did it by using the DroidRootKit. Love t so far, have installed Bugles Beast and UD. Question, I am reading about changing kernels for faster speeds. How is this accomplished? I have installed the new ROM's via the clockwork update.zip utility, but cant find solid docs on how to do the kernel?
View 6 Replies View RelatedI am rooted on the Droid 1 with a stock FRG22D kernel and ROM.I downloaded WiFi Tether from the Market.I tried it out on several different laptops using different Windows OS.It appears to work great as long as Access Control (MAC Filtering) and WEP are turned off.If either is activated, all data transfer ceases. Other posts have also noted this issue which appears to be associated with the stock FRG22D kernel.My question is has anyone flashed a Froyo P3 or other kernal that will allow Access Control or WEP to work as intended with the stock FRG22D ROM. I am happy with the stock kernel and ROM but will consider switching if I can find a compatable kernel or other configuration.Any help on this issue would be greatly appreciated.
View 4 Replies View RelatedHey everyone, just rooted my wifes Droid this morning (which was on 2.1 OTA update) with the .sbf recovery via RSDlite, then I used OMJ's update.zip to install superusers. Everything went perfect, however, now I am having trouble finding a kernel that will work. Have tried P3s and jdflg's which say they are for 2.1 but neither booted.
View 5 Replies View RelatedJust fixed my recovery mode issues through the solution given in this thread...
[Fix] Stock recovery coming back/Custom recovery wont stick
So i tried the next step on my agenda, which was to find an overclock kernel for Froyo 2.2. Ive tried a handful of ChevyNo1 kernels, and a couple from jdlfg and none of them seem to take. The speed scale in SetCPU remains at a max of 600mHz, while Overclock widget shows me a possible max of 900mHz. Even if i try to set the max at 900mHz in Overclock widget, the widget never actually reads that high and SetCPU never reflects that speed either.
I can confirm that I have root, and both SetCPU and Overclock Widget are being given superuser permissions.
jdlfg kernels v32.2.3 kernels for cm6rc2 and Lithiummod 800-1298 all stable and tested - CyanogenMod Forum
Just released this AM. From JDLFG:
UPDATED 8-2-2010 v.32.2.3 Expanded lineup of kernels compiled from the newest source aosp including (SGX,p3droids,cvpcs) tempmonitor fix.
All kernels have been totally redone including voltages and freqs as well as tweeks to enable a quicker bootup.Stay tunned for an addition of modules within the day.
I just rooted and downloaded the ult droid froyo beta, and it runs fine, but can't change to any other rom's or flash any kernals. It just loops with the M then reboots back into normal phone. I have backed up this one and stock 2.1, but won't even let me get back to that.
View 4 Replies View RelatedI want a kernel that gives me longer battery for my UD 2.0.0 ROM, and hits 800-1000MHz. Anyone got any good suggestions? slayher kernels are great with LFY, but not with UD
View 6 Replies View RelatedI HAVE PUT TOGETHER A LIST TO ALL FROYO ROMS, KERNELS, AND BASEBANDS THAT I WILL UPDATE REGULARLY!
**ONLY FOR MOTO DROID***
I WILL UPDATE THIS LIST AS SOON AS NEW ROMS OR KERNELS GET RELEASED.
IF YOU HAVE ANY QUESTION ON ANY OF THESE ROMS JUST ASK, I CAN HELP TO THE BEST OF MY ABILITIES.
SOME OF THESE ROMS ARE BASED OFF OLDER FROYO BUILDS AND SOME LATEST. THEY ARE LISTED IN NO SPECIFIC ORDER.
TRUST ME YOU WILL BE AMAZED HOW FAST I UPDATE IT.
***THESE ROMS ARE NO WAY CREATED BY ME. THESE ARE FROM THE EXCELLENT DEVS THAT BLESS THE ROOTED DROID COMMUNITY!***
UPDATES [ALL UPDATES ARE POSTED AT THE BOTTOM OF ROM SECTION]
Update 1 - Added Jamezelle's Sense 2.2 Rom
Update 2 - Added CVPCS kernels and Chevy No1's Simply Stunning v4.7 and MetickOnes's MetickMod FRG22D Rom
Update 3 - Added Insaneneiviesis Shadow Rom Final
Update 4 - Added CVPCS's Sapphire 1.1.1 **Thanks gwwjpd for pointing this out***
Update 5 - Added Benny879's Droid Evolution Rom
Update 6 - Added actngrezy's Project Elite Rom and ChevyCam's Steel Droid 1.92
ROMS BUILT FROM SOURCE
OFFICIAL OTA FRG22D [ROOTED-SUPER USER-BUSYBOX-DEODEXED]
COURTESY OF metiCkOne
[Release] OFFICIAL FRG22D - Deodexed, SU and Busybox - Droid Forum - Verizon Droid & the Motorola Droid Forum
Insaneneiviesis INSANELY CLEAN 1.3
[ROM Release] Insanely Clean v1.3 NEW Features-BUILT FROM SOURCE-MARKET FIXED-Insane! - Droid Forum - Verizon Droid & the Motorola Droid Forum
Jrummy LITHIUM MOD v1.0.12
[ROM] Lithium Mod - Source built awesomeness! Themes galore! - Droid Forum - Verizon Droid & the Motorola Droid Forum
Pl3x v3.0.0 [FROM SOURCE]
http://www.droidforums.net/forum/pl3...st-stable.html
Matt4542 EPIC 3.5
Epic 3.5 - August 30th. Download for a cookie - Droid Forum - Verizon Droid & the Motorola Droid Forum
Onix 2.0 RC1
ROMs | Onix Concepts
CyanogenMod 6 Final Rom
CyanogenMod-6 for the Moto Droid: SBFWHAT? V6.0.0 (08/27/2010) - CyanogenMod Forum
Liquid0624 Liquid Frozen Yogurt v1.6
LiQuID FroZeN YoGurT v1.6 (FRG22D BuILT FRoM SoUrCE!! GeT iT FaST BeFoRE iT MeLTs!) - Droid Forum - Verizon Droid & the Motorola Droid Forum
Xeodoxus's Dark Edge Froyo v0.8.1
[Release] DarkEdge UI 2.2 - Droid Forum - Verizon Droid & the Motorola Droid Forum
Ultimate Droid Froyo v8.0
Ultimate Droid Froyo eXtreme 8.0.0 - Droid - Droid Forum - Verizon Droid & the Motorola Droid Forum
Pete's Bugless Beast v0.4
[ROM STABLE] Bugless Beast V0.4 Android 2.2 FRF84B (Fully Deodexed) - Droid Forum - Verizon Droid & the Motorola Droid Forum
Chevycam94's Steel Droid v1.91
[RELEASE] Steel Droid 1.91 (FRG22D) - Droid Forum - Verizon Droid & the Motorola Droid Forum
Team Awesome's Rubik v2.0
[ROM] Much Waited For! Rubik 2.0 FRG22D! - Droid Forum - Verizon Droid & the Motorola Droid Forum
Woodyman's Succulent Desire v7.0
[Release] Succulent Desire v 7.0 - Droid Forum - Verizon Droid & the Motorola Droid Forum
Birdman's Frozen Lovely Yogurt v0.6
[ROM] Frozen Lovely Yogurt 0.6 - Birdman - AllDroid Public Board - [ROM] Frozen Lovely Yogurt 0.6 - Birdman - AllDroid Public Board - Forum
Jamezelle's Sense 2.2 Rom [HTC SENSE PORT TO DROID] BETA NOT EVERYHTING WORKS BUT IS COOL AS HELL! CHECK IT OUT![url]
ChevyNo1's Simply Stunning v4.7
[url]
MetickOnes's MetickMod FRG22D Rom
[url]
Insaneneiviesis Shadow Rom Final
[url]
CVPCS's Sapphire 1.1.1
[url]
Benny879's Droid Evolution Rom
[url]
Project Elite Rom
[url]
Steel Droid 1.92
[url]
FROYO KERNELS
Slayher Kernels - Interactive Governor!
Froyo Kernels by slayher - CyanogenMod Forum
Dozens of Sapphire (w/CPU Temp) Kernels
Index of /sapphire/froyo/1.0.0/kernels/20100803.1
TopQuark's Extreme Overclocking Kernels
[url]
P3Droid's Sapphire Kernels
Kernels, Get Your Kernels, RED HOT Kernels! - Sapphire - 0.7.0 - Droid Forum - Verizon Droid & the Motorola Droid Forum
ChevyNo1 (w/CPU Temp) Kernels
[8-1-2010] New Froyo Kernels - CPU Temp Monitoring is Back! - Droid Forum - Verizon Droid & the Motorola Droid Forum
P3Droid Kernels
P3Droid Kernels
JDLFG Kernels
jdlfg kernels v.32.2.5 NEW - CyanogenMod Forum
JDLFG's LithiumMod Kernels
Lithium mod Kernels . Official kernel of Lithmod - Droid Forum - Verizon Droid & the Motorola Droid Forum
CVPCS KERNELS - Interactive Governor!
[url]
BASEBANDS [DROID ONLY]
Stock from 2.1 Eclair
[url]
First (.00R)
Holy Cow, Another MyDroidRelease - Updated Radio File
Second (.01P)
[BASEBAND] C_01.43.01P (No Prerequisite Required!) - Droid Forum - Verizon Droid & the Motorola Droid Forum
I need help with understanding kernels, so far all I am able to find is that I need to find out what kernels work with my phone through trial and error because even if its the same phone a kernel may work for one person but not another. So to understand what a working kernel actually is like, I need to know what apps I need in order to see the product of an installed kernel. I know they have to do with getting the fastest processor speed, while getting the longest battery life, while getting the least amount of heat from the phones battery and processor.I figure to know if a kernel is cooperating well with my droid I need to know what is a normal battery/processor temperature for the motorola droid1? and what are kernel slots? what are standard/med/low voltages?I figure battery life is up to me to decide if it is good or not.
View 1 Replies View RelatedSome weird things are going on with my battery. I was running Liquid Froyo 1.9 and even 1.95 using slayher kernel and i even tried the p3droid kernel and when i reached about 40% battery, my battery would just jump to 20% and after that pretty quickly to about 5% and then its dead. I recently installed ultimate droid 2.0.0 also using slayher and even then it still did it. I don't understand why this is happening, i havn't even used my phone that much for it to reach 5% so fast, especially jump from 40 or 50% down to 20% in an instant.
View 5 Replies View RelatedNexBeast V1.1 Release. This ROM is based off of Pete's Bugless Beast V1.1. He put a lot of hard work into it, so if you enjoy this, or his work, please donate to him! You can find the link to his donate and the original BBV1 thread at the following:
http://androidforums.com/all-things-root-droid/85855-rom-bugless-beast-v1-1-a.html
Other developers worthy of your donations/praise are:
-Manup456 for creating NexTheme
-Bekit for the overclock kernels used here
-arctu for HelixLauncher(s) 1 and 2
-Ander Webbs for ADW Launcher
-Cyanogen and Koush for setting a high standard & ROM manager
*And everybody else that helped to make this possible!
ROM Link - Clockwork and SPRecovery Compatible
NexBeastV11.zip
Installation Instructions
-Rename to update.zip if using SPR, otherwise just install .zip with Clockwork. It is always good policy to do a complete wipe of data, cache, system, and boot. Don't say I didn't warn you
Features
-All of the speed, scripts, and overall goodness of Bugless Beast V1.1 (see above link for details)
-Completely Themed with Manup's DroTheme
-Includes new font set (removable)
-Includes Themed HTC_IME Keyboard (credit to jonasl & gIMpSTa)
-Themed MotoTorch and Ringer Widgets (thanks btdownloads7)
-Latest Wired & Wifi Tethering Apps
-SpareParts app with options by Pete
-Themed ADW and 3D Launchers
-New Superuser 2.1 app and binary (credit to ChainsDD)
-Themed new Facebook app w/ Inbox
-Lowered Ringer Delay from 3s to 300ms
-Battery percentage in notification bar (hard coded)
-NexThemed Live Wallpaper (credit to Pete)
-Blazing fast w/ tons of free memory!
OPTIONAL Kernels: (credit to Bekit) - Installation Video Instructions in next post!
-600Mhz LV 5X *Already Included*
-800Mhz LV 7X
-1Ghz LV 7X
-1.1Ghz LV 7X
-1.1Ghz SV 7X
-1.2Ghz LV 7X
-1.2Ghz IV 7X
-1.3Ghz LV 7X
-1.3Ghz IV 7X
P3Droid kernels will also work great - Get them here. ADW Update (minor) There's a newer version available in the market now, I've themed it. Get it here: org.adw.launcher.apk. Then use this next script down here to remove the old ADW
[ROM] Simply Stunning v2.2 ESE53 2.1 - (3/25/2010) - Helix Launchers 2D/3D - New Kernels
[Release] [UPDATE] New Kernels - Low Voltage + Medium Voltage - 3/25/2010
Downloading now. Will flash without wiping, but I will install one of the new low voltage kernels.
I'm loving 2.0.2, so hopefully this will be just as good. Good to see HelixLauncher 2.
What kernels currently support the "Wired Tether" app?
View 7 Replies View RelatedI have several USB-MicroUSB cables (some OEM Motorola, some other brands), several 12 volt-USB converters, several cars, and several devices that accept MicroUSB connection for power. With everything other than my Droid (including a Blackberry and a GPS unit) every combination of cable and 12volt converter works. With the Droid, all of the combinations will turn on the screen (indicating the Droid knows a cable has been connected), but only a few combinations will actually charge the Droid. The only possible explanation I have come up with for this is that the Droid has some sort of minimum current requirement, and that some converter/car/cable combinations are unable to meet this requirement. So, what is the minimum voltage and current that will allow the Droid to charge?
View 18 Replies View Related