I was attempting to get get 2.2 working on my phone and when i rebooted its now stuck on the motorola logo, any help would be appreciated, i need my phone functional for work in the am.
View 9 Replies
I picked up a brand new Droid X, turned it on, got it all setup, and it downloaded my apps that I used to have on my old Droid. Then I rebooted it after all the apps were installed and updated, and now it will not move past the Motorola logo screen.
Searching around the internet I have found others that ran into this issue, but they were always rooting their phones. I also am not able to boot into recovery mode.
I have not rooted it, attempted to root it, or done anything other than as described above.
Is there anything I can do? Or do I have to just head back to Best Buy and demand a replacement unit?
I tried installing Tranquility and must have screwed something up because now my phone won't boot past the Motorola Logo. It's been sitting here like this for about 15min and I can't even boot into recovery by holding the power and home buttons. I don't know what else to do now. Idk if my phone is bricked but even if it is don't I need the SBF file to unbrick it and I can't find that file any where. I did a nand backup or whatever before doing any of this so hopefully that can help me. What should I do now?
View 9 Replies View RelatedI have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
View 6 Replies View RelatedI went to reboot my Droid because it was lagging a little and when it came back on it go stuck at the Cyanogen boot screen. I pulled the battery, put it back in and held the X to boot in recovery and my recovery won't come up either. It just skips right to the Motorola M and if it doesn't get stuck there it goes back to the Cyanogen screen.
I haven't made any changes to the phone at all so I am completely puzzled on why this is happening. I obviously can't take it back to Verizon since its rooted so if there is a way to fix this I really want to because I love my phone and my wife will kill me if it is screwed up.
Ever want to change the ugly Motorola boot logo on your Droid X or Droid 2? Now you can with DX/D2 Logo Changer on the market.For a gallery of all the images you can choose from see here.Special thanks to Team Black Hat who originally started work on changing the boot logo and the many people on these forums who created the images.If you created an image used in the app let me know and I will put your name in the about/help section.
View 5 Replies View RelatedSo I decided to hijack the "Red Rage" boot animation and use it as the base of my animation. Mine just has some Georgia Bulldog love to it. Also I have modified my boot logo and no longer have the "M" its now a lot nicer. I will include the bootanimation.zip in case anyone wants this. Just place it in the /data/local/ folder. Do not Unzip it, leave it how it is. If you have another one there just rename it with a .bak extension in case you don't like mine. Its stretched a little vertically, not sure why not too noticeable tough.
http://www.youtube.com/watch?v=0mAMNbLANnI
This is to change the motorola logo that you see when you boot your phone to a custom image. This is separate from the boot animation seen afterwards.Tools/files you will need:
1) RSD Lite
2) droid sbf
3) SBFCodec
4) Photoshop (or paint, or whatever drawing program)
5) Hex editor (frhed is free and very easy to use)
NOTE: I do not use sbf-recall because it complains about needing version 1.3, so I use SBFCodec instead.Steps:
1) Run SBFCodec and open up the sbf file. This will extract all the smg files and header files.
2) Using photoshop, create an image that is 480 pixels wide and 182 pixels tall. Each color should be assigned 8 bits (1 byte), or in paint, just make a 24 bit bmp file. Mirror the image, making the left become the right, and the right becoming the left. Save as a bmp file (photoshop method).
3) Using a hex editor, open up your image and erase the first 54 bytes of data. (and possibly the last 2 bytes of data if you used photoshop. the number of bytes remaining should be exactly 262,080) With the remaining data, reverse the bytes. (using frhed, the option is in the edit menu->Reverse bytes)
4) Using a hex editor, open up the CG42.smg file created in step 1 and erase all data except the last 64 bytes of data (these 64 bytes of data should be FF's in the file). Then paste in the remaining data from step 3 to the beginning of the file and save. Your final file should be exactly 262,144 bytes large.
5) Go back to the SBFCodec window and save (this creates the sbf) the sbf file and name it whatever you want. i.e. boot.sbf
6) Using RSD Lite, flash this sbf to your phone. It may take 5-10 minutes for the flashing to complete. (after the 10 minutes, it might say "failed", just click on the show device button once that happens and you'll have succeeded)You now have a stock phone with a custom boot image. Go ahead and root your phone and stuff. Sorry for the difficult instructions, this was the only approach I could think of to edit the boot logo.
I installed a custom bootlogo a while back, but my phone is giving me hardware trouble (keyboard and audio jack) so I will have to eventually have it replaced.I was wondering if anyone had the original "M" bootlogo, or could direct me to where I can find it.
View 2 Replies View RelatedMy phone keeps freezing up after it goes through the Sprint Logo and gets to the Samsung logo. Any idea what is causing this and how I can fix it?
View 6 Replies View RelatedI have ran into a issue while trying to root my Droid. I was following the sticky and the first time I used RSD and loaded SPRecovery 2.1 SBF it failed. I got a Critical Error DEA1. I then booted the phone and ran the file again and it completed this time.I have powered down and held X each time and never get past this screen. I then went into the section on putting the stock OS back and I get the same issue. Is there anything I can do? I have been searching the forms, but I cannot find anything.
View 1 Replies View RelatedI started charging my phone (with the wall charger) around 12 last night and when I checked it at 10 this morning it was only charged to 40%. After texting a few people, etc. it went down to 30% while still on the charger but after I left it alone it went back to 40%. I turned the phone off and back on and unplugged it from the wall and plugged it back in and nothing's changing. This has never happened to me before.
View 1 Replies View RelatedInstead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
View 2 Replies View Relatedhaven't been on here in a while . For those that are going to put "Search is your friend" , just help me out and stop being as counterproductive as you think I am
View 10 Replies View RelatedI'm having a bit of trouble with overclocking. I'm running Fission 2.1, no theme at the moment. I tried using the built-in overclocking zip files but they made my phone extremely slow and very unstable. After that I downloaded Jrummy's Overclocking app. I can only get up to 1.15Ghz on all four voltage settings before my phone craps out on me. I've tried going higher on different voltage settings but to no avail. What am I doing wrong?
View 18 Replies View RelatedI have a Droid and I want past occurrences not to delete from my phone. The calendar events seem to stay on my Google Calendar but are deleted from the phone. Anyone know how to get this not to happen?
View 1 Replies View RelatedSO the first time I rooted and the first update I did gave me some problems. When the phone rebooted after the flash the Moto symbol would come up and not go any further. Either that or the symbol would show up and then the phone would reset after five seconds. So I did a few battery pulls and finally got it to work after a while. Ever since the 2.0.4 update I cannot get the phone past the Moto screen. I've tried about 12 times between that and 2.0.5 and I have to keep restoring back to my original settings before I flashed any of the ROMs. Anyone know why this is happening? I loved my phone so much more when I had the Smoked Glass 2.1 ROM and OC.
View 14 Replies View RelatedHas anybody figured out how to get past the Market bug that won't allow a US Credit Card to purchase an App listed with foreign currency?If I try to buy anything listed in Euros, I get an "Invalid Card" message.
View 15 Replies View RelatedI just used the pc36img.zip from the how to guide on rooting. It apparently worked this time but now I'm stuck at the boot screen. I suppose I have no ROM now? Where can I get one and what do I do with it. if that is indeed the problem?
View 5 Replies View RelatedAfter updating my firmware, my phone rebooted. After it rebooted, my screen was black. It was on, but nothing would show on the screen beyond the top bar. Frustrated I turned off my phone, and since then it's been unable to move beyond the "Samsung". I've been at it for over an hour to no avail. It was fully charged before the update, and was charging throughout. I have tried many different things in order to get it to start, but nothing has worked. I have had no problems leading up to this update. (Also, this was not a virus, because all of my other Android-using friends have gotten it...and many have faced a number of problems as well.) --Samsung Galaxy S3 user
View 3 Replies View Relatedcompile a ROM based on CM10; what would make that ROM go into a never-ending boot animation on a clean flash (wipe data/cache/dalvik), yet boot up without a problem when dirty flashed over a CM9 variant. One might think that since a dirty flash over CM9 works, what about dirty flashing over a CM10 variant? What if it acts just like performing a clean flash and never gets past the boot animation?
Lets compound this by adding that once a successful boot-up after the dirty CM9 flash has occured; if one goes into recovery and wipes data/cache/dalvik, the ROM goes back into a never-ending boot animation.
My phone wont go past htc boot screen. Anything I can do?
View 2 Replies View RelatedI have a rooted droid that was running cyanogen mod. I tried to change it back to the default 2.2 ROM through ROM manager, and after flashing the new ROM, it rebooted as normal, the motorola logo pops up, then changes to the default red eye, and hangs there forever.I tried to hold x while booting up, and the icon with the exclamation point inside the triangle floating over the phone shows up, but it just hangs there forever as well, and I can't get a menu to come up.I can get into the bootloader while holding up on the dpad during bootup, and it says "OK to program".Do I have any other option than using SPRecovery (If thats even an option, sorry I'm new to this)?
View 7 Replies View RelatedI was trying to update my ROM from ZapX RC2 to ZapX Bazinga 1.6. I followed the instructions, ran bootstrap and got all the way to "mount system" (after formatting system and cache) and realized I didn't have the update.zip file on the sd card yet. So I hit reboot system. Now I'm stuck with at the M logo. I made a full backup on the sd card, but don't know how to access it since my computer does not recognize my phone.
View 5 Replies View RelatedSo this morning i was installing kies onto my laptop so that I could transfer some videos and photos from my galaxy to my computer from my friends birthday. it didnt work and (kept saying the device connected to my usb port has malfunctioned on my computer) so i restarted and phone thinking it just needed a reboot and now it wont go past the S loading screen.
Is there anyway I can get into the phone and get the videos and photos from it? They are from a friends birthday and they're very important because they moved away! any help would be greatly appreciated.
what Ive tried several times already is removing the battery and restarting and no go. Ive turned the phone onto samsung recovery mode and it says:
CODE:........
And of course it gives me the options to:
CODE:.......
what wipe partition cache do?
It just hit me now (I'm at work right now and I left my home, but as of last night,I was still on 2.1) but is the 3G signal supposed to disappear when you're on a phone call?
View 6 Replies View RelatedMy friend gave me this tablet because he couldn't get it to work, and now I'm trying to fix it. I'm pretty sure he tried to root/install google apps on it, but not exactly sure what he did and did not do.
I started by trying to just reset the firmware by booting into recovery and choosing a factory install. It was not able to do it because of an error reading the cache files. There was also an option to reset the cache files, but this threw the same error. Because of this, I also cannot install from an SD card. Along with this, USB debugging had not been enabled, so I can't use ADB to sideload a new bootloader or firmware onto it.
I have not really found any threads in these forums deticated just to overclocking the Droid. I am running BB v.9 and would like to overclock past 600 mhz. I have 2 overclocking utilities. (Setcpu, and overclock widget) I understand that I have to update or flash the Kernel. I tried doing this OverClocking Motorola Droid To 1.3 GHz In 7 Easy Steps | areacellphone.com
The adb commands were successfull. WHen I rebooted my droid it was bricked (well not really cause I did a Nandroid backup right before I did this) It was just frozen with the white Motorola logo. Perhaps I downloaded a bad 800 mhz evilboot8.img.
Anyone have or know where I can get the logo for the for the Superuser Permissions app? I think it would be a cool avatar to have of the little guy with the gun
View 5 Replies View Relatedaright so i found some other threads with my problem, but no answer really i dont think. but anyways. so im running 2.3.9, flyx and tranq. when i shut my phone off and back on sometimes it gets stuck at the motorola logo, i do a battery pull and its fine. but its just annoying cause i forget sometimes and it stays on it for a few hours. is there any fix for this.
View 3 Replies View Related