My X is stuck on the M logo. I cannot seem to get the right driver installed for rsdlite to see the phone. I am just trying to sbf back to a working phone.
View 14 Replies
aright so i found some other threads with my problem, but no answer really i dont think. but anyways. so im running 2.3.9, flyx and tranq. when i shut my phone off and back on sometimes it gets stuck at the motorola logo, i do a battery pull and its fine. but its just annoying cause i forget sometimes and it stays on it for a few hours. is there any fix for this.
View 3 Replies View RelatedI was messing around with clockwordmod recovery and did something I shouldn't have. I am not deodexed, but I heard that you could apply some of the rom modifications without any problems. So I did one, and it was ok. I decided to try a different one and thats when I ran into a problem. My phone is stuck at the M logo now and I am not sure how to fix it. I could have sworn that i made a recovery before I installed the .zip but when i went in to try to recover it said there was nothing there. My one savior is that I have the SBF file I need, but I am on a mac so I can not use at the moment and would like to avoid this at all costs. Does anyone have any suggestions for me or will I need to SBF? Also, i have not let it sit at the M logo for an extremely long period of time, is it possible that it will pull around and start to load properly or is there definitely a problem?
View 3 Replies View RelatedI just finished updating my wifes Droid X to 2.2 (rooted) moved SU etc.. the phone boots completely (I can ADB in and it makes noise) however it only shows the M logo. I cant boot into recovery and the only way to make it boot is to adb reboot-bootloader anyone know WTF is going on here? I've never seen anything like this before!
View 11 Replies View RelatedSo I DL'd then installed 2.2, that went fine. It rebooted and it stays on the M logo. I can hear the "droid" where it boots but it stays on the logo
I've tried pulling the battery, even for 5-6 mins, going into system recovery mode and clearing cache and still the same thing.
Not sure what to do here. I hear it's some sort of boot-loop error?
Left battery out for 10-15 mins and now it boots fine. Phew
I rooted my X so I could take screenshots. I saw all the hoopla over the new froyo release, and figured I'd try it. Well, now I'm bricked or stuck in endless boot, whichever, and can't get past the Motorola Logo. What can I do? I plug my phone into my pc and it doesnt even recognize it. I keep seeing people telling others to flash the .sbf, but I don't even know what that means.
View 7 Replies View RelatedSo I followed the droid-life.com method to get SPRecovery on my stock 2.1 droid.
Everything went fine, I had SPRecovery and I was going to try to get root access using this ESE81update.zip created by pete and following this method...
YouTube - Installing a Custom ROM in SPRecovery with No Root
Alright so I was on froyo stock image frg01b rooted. I tried to install nextheme over it. I tried to go into recovery, but got the exclamation point. Went back into froyo, flash the alternative recovery, then flashed back to clockwork. It goes into recovery fine now.
installed a .zip file (the nextheme)
reboot
it hangs on moto logo
Now try to go back into recovery to flash backup. It wont go into CW and now I see an exclamation point. Now I went into the stock recovery menu, wiped data did factory reset. Wiped cache.
reboot
hangs on moto logo
What did I do?
I tried putting stock 2.1 on SD and renamed it update.zip and tried to flash with the stock recovery, but it says failed to access /sdcard .zip and then go back to the (stock) recovery menu. Clockword is gone and so is any and all ROMs.
I flashed my phone to 2.0.1 b/c I thought I had to do that. Turns out I didn't, but there is outdated and updated information out there and I was misled. Anyway, 2.0.1 installed fine and it booted up, though my phone wasn't activated. Anyway, then I realized I needed SPRecovery, so I installed the sbf for that using RSD Lite. It installed successfully as far as i can tell? But it did a reboot, and now it's just stuck on the white-background Moto logo while plugged into my USB. RSD Lite says "Please manually power up this phone."
View 4 Replies View RelatedI have a rooted droid that was running cyanogen mod. I tried to change it back to the default 2.2 ROM through ROM manager, and after flashing the new ROM, it rebooted as normal, the motorola logo pops up, then changes to the default red eye, and hangs there forever.I tried to hold x while booting up, and the icon with the exclamation point inside the triangle floating over the phone shows up, but it just hangs there forever as well, and I can't get a menu to come up.I can get into the bootloader while holding up on the dpad during bootup, and it says "OK to program".Do I have any other option than using SPRecovery (If thats even an option, sorry I'm new to this)?
View 7 Replies View RelatedI was trying to update my ROM from ZapX RC2 to ZapX Bazinga 1.6. I followed the instructions, ran bootstrap and got all the way to "mount system" (after formatting system and cache) and realized I didn't have the update.zip file on the sd card yet. So I hit reboot system. Now I'm stuck with at the M logo. I made a full backup on the sd card, but don't know how to access it since my computer does not recognize my phone.
View 5 Replies View RelatedI'm kind of new to Rooting and Roms but I keep getting the same problem while installing Roms using Rom Manager. I flash and then I install the ROM and everything goes well until the boot up screen. It gets stuck in a loop of the Droid and Droid Eye animation and I have to restore it. Can anyone help me figure out what's wrong? I am using the Droid with Froyo, rooted using Easy Root.
View 5 Replies View RelatedMy phone came stock with 2.1 and I have upgraded to 2.2 and now would like to go back to stock. Is there an RSDLite file that will flash my phone back to original state? I know there is a 2.0.1 sbf file on the forums, but I'd like to get a 2.1 file if possible.
View 5 Replies View RelatedMy phone has no service.I know the bills paid and that it was working 10 minutes ago. Whats the problem?
View 1 Replies View RelatedI'm trying to root my phone from stock OTA 2.1 update-1. I've followed all the guides I've been able to get my hands on. The only thing stopping me is that RSDlite is not detecting my phone when it's in Bootloader. Everything on the flash screen says that it's good to go. I've installed all the drivers and the PC does detect the Motorola Flash Device. I tried using 2 different computers, one with XP SP3 and one with Vista (ran as admin), and nothing on both. I've spent hours searching the web for similar problems and solution, I've tried just about everything and I'm about to lose it. Any one else experience something like this? Any tips on something that could fix this issue?
View 8 Replies View RelatedI have tried a few times now to flash the ese53 sbf file. I want to do this to get the udated baseband but it keeps saying fail and then rebooting. Unfortunately when I check I have the old baseband. Any help would be appreciated.
View 6 Replies View RelatedI think I successfully followed easy directions and fully flashed my phone back to stock OTA 2.2! My phone appears to no longer be rooted.
But my phone is still popping up "Tranquility" before the Droid Eye comes up upon bootup??? Why is it doing this?
Here is the following info under my phone's summary:
Its not doing anything thing? Like all it says is HTC and its got like a spotlight on it, I am charging it now so maybe its because I needed to be charged? a little help!
View 2 Replies View RelatedI've already installed the drivers and adb,but adb shell shows no device.The 2nd LG USB Modem installed as an Android Phone.I'm using winXP,SP2 PRO, these are my steps.enable USB Debugging mode,dial 3845....and enable root permission,restart my phone,connect my phone to PC,install the drivers.win+R TO open CMD window,cd to the sdk tools directory,adb shell,shows device not found in my device manager,there's an android phone class,under it is an android Adb.
View 4 Replies View RelatedWas trying to root my samsung galaxy tab 3 sm-t110 using a method for the sm-t210 and the root didnt fully work so its not even rooted and when I boot it up it says sm-t210 with a caution icon. I know there is no update for my device (jellybean 4.2) but when I search for one it says I cant get one because my device is modified. How to delete the sm-t210 driver or whatever I even did or how to root my sm-t110 if its rooted I dont mind no updates but its not even rooted aaa and I cant update.
View 2 Replies View RelatedI've spent the last couple of hours trying to figure out why HTC Sync would not allow me to use the Mobile Network Sharing (MNS). All morning, I had assumed that my notebook was using the MNS as I was able to access Facebook from the office. Turns out that I was latched onto a secondary WiFi access point without realizing it. So, after installing HTC Sync, all other drivers installed fine, except for the NDIS driver which is needed in order to use MNS. I searched high and low to find a download for the driver, and finally found it.
For those of you who are missing the driver (not sure? Open Device Manager, and see if you have an Android Phone device that is showing up as an error), go to your Program Files folder, look for the HTC folder, and in it, you will find HTC Drivers... that elusive NDIS driver is stored there. Just go to Device Manager, find the Android Phone device, right click, select Update Driver, and get it to find the driver from the folder above. Once the driver is installed, getting online is easy
i was running the latest version of Slim Kat rom for my i9100 when it turned off and then was stuck on samsumg boot logo. When i try to access twrp it just says teamwin and wont go any further. It happened once before and so i just flashed a stock rom and then went back to rooting it. However, now when i try to flash any rom (stock/custom), or another recovery with odin it freezes at "nand write start". I have access to download mode which is really the only thing i have working atm
Ive read around and done everything (eg try other usb ports/cables/odin version) but no luck. Is there anything else i could do? I dont wanna do a pit flash cause im scared ill completely screw it up.
I try to backup my stock ROM using clockworkmod Recovery through my optimus hub. when reboot my phone entered into "fastboot mode started udc start() " . then I try to install cwm recovery partition using fastboot.exe. but now I got stuck at LG logo screen and nothing is working.
View 1 Replies View RelatedI was rebooting my phone today and it every time I try it gets stuck on The Galaxy S logo with the big flashing "S" on the screen. It acts like it is going to boot up but just after the ATT screen and the boot sound it gets stuck. I did the one-click-lag-fix about 2 weeks ago and the phone has been running smooth ever since. My wife and daughter are on the road so not having a phone really stinks right now.
View 10 Replies View RelatedOn my nexus 4 I was trying to download the 4.4 kitkat, but i messed up and deleted something i think.So now i'm just stuck on the Google logo,
View 14 Replies View RelatedI have an android tablet the is stuck at the boot logo. I've successfully gotten into recovery. But it had no menu...[URL]
USB debugging is not on. I have no clues as to the model of the tablet, as it isn't said anywhere on the device.. [URL]
currently my Galaxy Tab P1000 is stuck at Galaxy Tab/Samsung logo.
Before this I'm on v2.3.3, rooted. Then I try to flash MIUI ROM where resulting my tab to stuck at boot screen. Try to restore nandroid backup, still stuck at samsung logo plus now cannot reboot into recovery. Download mode still can access.
My karbonn A1+ stucked on Logo screen.i tried to hard reset by pressing the volume down key and power button but nothing comes up then i put the set on charger the phone gets on but again stucked on logo screen..do i need to reflash but how do i ? the phone is not getting on recovery mode. isn't there a way to attach the mobile too pc and then reflash?
View 2 Replies View RelatedI have htc one 801e asia stuck on htc logo i tried to push zip rom in all way but cant make it work i search a lot for ruu but cant find. give me a linke to download the official ruu exe for htc one 801e
View 1 Replies View RelatedThe tab is on restarting problem, I had solve this problem before by restoring farmware through Sales_single_P729BV1.00.01..
But this time I m not able to clear out, it shows only Android Logo. I try to put in FTM mode again, but no success... it is suggested to connect in ADB, but computer wont respond... when I pressing both volume Button it connect and shows com-port, but I can't restore farmware in this mode.