I got a full body zagg today and on the way home when I tried to use the car mount it started to peel the corners off in the back. Does this only happen when the zagg is new and not all the way secure or did I make a mistake and need to peel of the back pieces?Just curious if anyone else have both the zagg and car mount and if so if people are having the same results as me.
View 3 Replies
Does anyone use the Zagg full body shield and if so what do you think about it? I have the neoprene case with mine and the Zagg screen protector though I heard these cases cause dust to collect through the volume rocker and thus getting under the screen.
View 3 Replies View RelatedI ordered a ZAGG full body max protector to replace my Body Glove case. I didn't know if anyone had any experience with covering the whole body with this thing? I went with the max vs the easy version because I'd think the corners are going prolly mostly likely to get hit if it's dropped and the easy version doesn't protect sides/corners. Obviously this provides no shock protection if it's dropped but it's a nice compromise between showing off it's sexiness and protection.
View 25 Replies View RelatedI'm thinking about a full body skin but had some questions for those who have it. Is the back difficult to put on? Would you recommend this over just screen coverage? I'm looking to ditch my case as it bulks the phone. Also, how's the feel. I've had a zagg before, but curious how it feels on the whole phone.
View 6 Replies View RelatedLooks pretty craptacular right now. I know I'm supposed to give it another 12-24 hours to dry and "cure" (although I seem to recall seeing the timeframe of 24-48 hours on this board, anyone vouch for that?), but I'm a little concerned.Sorry for the huge crappy pic, had to take it with my old phone. But you can see the smears and lines. Those are what I'm worried about. Anyone who's used a Zagg able to comment on whether those disappear in the curing process? I'll be sure to post better pics when it's completely dried for people.
View 14 Replies View RelatedI got one last month but Stealth Guard Protectors now have a 50% off deal until midnight tonight when you enter code save50. These are already way inexpensive but now the deal is insane. $5 for full body coverage. Better than BSE and as good as ZAGG invisibleSHIELD at a better price.Fairly simple to apply and scratch-proof.
View 31 Replies View RelatedI'm thinking about buying one of those full body case things, such as Ghost Armor for example.Just one thing I'm nervous about... that liquid solution that comes with it needed to place the protector onto the phone. Chance of messing up? difficult?Anyone find a nice body protector worth every dime for the DX?
View 12 Replies View RelatedJust wondering if the phone fits in the car or home docks with a full body skin such as Zagg, Phantom Skinz, or Bodyguardz installed?
View 3 Replies View RelatedMy wife and I are getting our Eris on Tuesday.I'm thinking about getting the full body protectors from BodyGuardz. Do you guys have any suggestions on which full body protectors work great, and wheter or not BodyGuardz make goo products?I was wanting to by the Invisible Shield from Zaggs, but they're on a 2 week back order.Also, I'm wanting a case or holster for my Eris, any suggestions?
View 47 Replies View RelatedI have for sale:One stock Eris battery, never used, unopened in plastic baggie. $20 shipped.One complete Phantom Skinz full body film for the Eris.This is $17 plus shipping for two now that it's on sale. I'll sell it for $10, shipped.I will say that I really liked the Phantom Skinz on my Eris. The only thing that I didn't like was it eliminated the "soft touch" feel on the back. Other than that, no bubbling, very smooth, did not interfere with the screen and great self-healing.
View 17 Replies View RelatedI stumbled upon this today. I never heard of a clear full body cover skin for cell phones. I'm interested in getting it for my EVO. Anyone already have it? how does it work on the edges? And, was it easy/difficult to install? I've been searching the web for a how-to video but haven't found one.
View 10 Replies View Relatedmade out of full metal? or metal back plate with plastic body?
View 6 Replies View RelatedSo I'm pretty new to rooting. On some themes or roms they require me to Mount System and Mount Data. I have clockwork recovery installed and when I select the option Mount System, it just acts like i didn't select anything. Is there something I'm doing wrong?
View 1 Replies View RelatedThinking about getting the zagg invisible shield front and back. I'm wondering how you guys like it. Particulary interested in how you guys like it with the back shield.
View 2 Replies View RelatedI have seen threads on the best screen protector, and I have some of my own conclusions. I have had every single one I am listing, I have used them each for about 1 month to 2 months, so I know what I am talking about. Here they are. With each one, at the end I will include scores ranging from 0-5. And the overall, average of each one. Grip- How well each one is set down on something and able to remain put during a drive or something, and how it feels in the hands.
Screen Feel- How close and nice it feels to the screen. Protection/Scratch Test- How it preforms to the normal keys in the pocket and nails etc, hitting the screen and phone. Price- Worth the price paid? How well of a deal it is. Installation- How easy it was. Overall- The average of the 5. Background= All were installed using Zagg Spray. I used each for about 1-2 Months Each. I only bought the Full Body Protection. The Zagg Cost me 19.99 for one. The Phantomz Skinz cost me 25 for Two. And Stealth Guard cost me 9.99 for TWO. Took my time with installations and all. Thanks and have a good time reading this.......................
I do not like windshield suction cup mounts when using a GPS in my car.
I always used a dashboard beanbag mount with my Garmin GPS.
I just bought the Droid X Car Mount and I can now use my Garmin beanbag with it by inserting the ball joint into the back of Droid X car mount - fit's perfectly.
For anyone using the Body Glove case, I have a question for you.Has your slider become loose?I know the case fits snug and causes the keyboard to be tighter opening, but when removed, is your slider actually loser?I just bought the Body Glove but I'm thinking about returning it. There is some resistance to opening the slider, which I wouldn't mind, if it wasn't causing the slider to actually separate from the screen.What I mean is, upon looking head on at the side with the headphone jack, I can see the tab where the bottom plate snaps to the phone rubbing with the tab where the front plate snaps to the phone when opening the slider. That's what is causing the resistance, at least on my case. That would be fine except, from that angle and from the angle looking into the micro-usb port, I can see the screen and slider separating a bit when opening the slider. I'm worried about that making the slider loose over time.
View 9 Replies View RelatedI dont know if its something I did or not but...when I try to forward emails from my Droid Gmail account I get a message that says "Send this message without text in the body". If I continue then it forwards but nothing comes with it.
View 1 Replies View RelatedI got the body glove case, and I like the feel of that, so I don't wish to use another. However are there any media docks, and car docks that will work with this case on the phone?
View 5 Replies View RelatedI rooted last night, DL LFY and LFY1100 kernel. I installed the kernel and then LFY itself. After trying to reboot it only gets to the custom boot screen and will not launch. After 15 minutes I pulled the battery and tried to launch in recovery mode to load my backup. Upon trying to do that it says cannot mount to SD card. I try again and same thing. After failing to mount it goes into the same custom launch screen for LFY but no OS comes up.
View 41 Replies View RelatedYou know, I hate that feeling when you join a great forum, and having to ask for some sort of help in your first post. *sigh* Anyway, here goes.I just got my DX, and its pretty awesome. I love almost everything about the phone. The problem is that the SD card won't work, and I'm not sure if it's the card or the phone. On around the 5th day with the phone, I was listening to music with pandora, and decided that I wanted to play a little Super KO Boxing 2. However, the battery was really low at the time. Because of this, as soon as I opened the game and it started searching the SD card for the down loadable content, the phone ran out of battery and the screen froze. I had to turn power off. Later on when it was done charging, I turned the phone on again, only to be notified that the SD card was of an unsupported filetype. So I formatted it in the settings menu, but nothing happened. I clicked format again, and still nothing. Now, even when I click the "mount button", nothing happens. I have tried removing the card and turning the phone on an off. I don't actually own a pc card reader but would have no problems with buying one.
View 1 Replies View RelatedIs there a car mount by now that includes a charger? the one on the motorola website still shows as "coming soon" and the one verizon is selling doesn't include a charger.
View 1 Replies View RelatedIt appears that you cannot take video while the phone is placed in the navigation mount. I tried this yesterday, and when the phone goes into video mode it is ok. But the minute you try to start recording, its kicks out to the main screen. I'm wondering if this is supposed to happed, or if its a glitch that mine has? Can anyone verify this?
View 3 Replies View Relatedi figured out how to make the USB cord find the droid when you plug it in the comp, you drag down the notification menu and hit "mount" and it pops up the folders on windows.. i got that part
but i was wondering if there was a way to just make the folders pop up automatically so you don't have to drag the notification menu every time and hit "mount".
this just happened to me today, i tried to put a file on my sd and my phone would not give me the option to mount. Its like it wasent even recognizing that it was plugged in. however, I am able to use the same usb cord for my wall charger. is there a problem with my phone, or my computer. Im using xp (yes, still) and havent had any issues till now.
View 16 Replies View RelatedHow do you mount the sdcard with clockwork? In SPR there were various mount options.
View 4 Replies View RelatedI have a '99 Saturn SC2 that I modify. I've added an overhead console from a Suburban, and have a large space that I've always known I'd like to use for something cool. Looks like I'll be getting a Droid soon, and am eyeballing the spot for a Droid mount. So, I'm looking for a relatively inexpensive mount that I can modify to fit this space in front of the map lights.
I have a filler plate that fills that hole, which I can modify with the mount to give a cleaner look.
I'm still getting my head around what all I can do with the droid, so it's hard to say what all I plan to use it for in the car. I have not yet upgraded the stereo headunit, so the droid won't be interfacing with it for quite a while (on the plus side that means when I do upgrade the headunit, I can pick whatever's going to work out best). Might be nice to find a dock that activates the car mode or whatnot, but I'm not looking to spend big bucks on something that I'm going to likely have to chop up to make it fit.
Also, as this will be my phone and a business tool, the Droid needs to be easily removable.
Any word on when Motorola is gonna release a price for the car dock on their site? I'm definitely looking to get the car charger if I'm using the nav. And I certainly don't want to pay $30 for each.
View 2 Replies View RelatedCan someone tell me the diameter of the suction cup on the Motorola car mount?
View 3 Replies View RelatedI had to .sbf last night back to 2.1, rooted with Universal Androot and then used rom manger to update to 2.2 which is 2.3.9 then when I try to restore a backup or apply any zips from sd card during clockwork Mod recovery I get the following error.
ClockworkMod Recovery v2.5.0.5
E: Can't mount /dev/block/mmcblk0 (or /dev/block/mmcblk0pt1)
(Device or resource busy)
Can't mount /sdcard
Does anyone have any solutions to help me out? I am not sure if it was something to do with the root method I used or something else I need to do to get it going.
The first time I rooted I installed the first leak 2.2 myself and then rooted with adb, but I no longer have the leak 2.2 file so I rooted 2.1 first then installed 2.2 like I said earlier through rom manager.