Can someone walk me through how to overclock my droid to 1Ghz. I am rooted, but I have never had to use the adb. Can someone walk me through this process. Can I just issue the necessary commands from my terminal emulator?
View 7 Replies
I am currently running the alldroid community beta rom at 950 mhz. How can I up it to 1.1 or 1.3 ghz? I do not know how to access adb. I downloaded the android adk but now I am lost. I am also running an older recovery, not the newer 0.99.3 one, I think its 0.10.5. I have tazs 1300 kernel download but now I don't know how to implement it. Can I use terminal emulator for this?
View 5 Replies View RelatedIf you'd like to try it, check your normal ROM website for droid. It allows up to 1ghz clock. I personally have profiles set for a little lower for most times, but its running fine at 1Ghz.
View 49 Replies View RelatedThe only thing I really want to do is overclock my droid. I really don't want anything else changed. Is that possible?
View 3 Replies View RelatedI've been on the fence about rooting my droid, and looking through these tutorials it looks simple enough.
1. What are Kernels and do I need them exactly
2. Do I need a specific ROM to overclock or will just a plain rooted phone work
3. Do I need a nandroid backup?
What the newest and greatest way to overclock the X these days? Root needed I assume?
View 12 Replies View RelatedHere is the link: www.theblackdroid.com/theultimatedroid-1.0.0-final-droid.zip
Just posted at the ultimate droid forums, you might have to be a registered user to download.
Running BB.4 with flash beta 3 installed. Yesterday, running on the default 800Mhz kernel that comes in BB, flash ran ok. Today, I put Chevy 1Ghz ULV kernel on my droid, and flash keeps crashing. I went into SetCPU and throttled back to 800Mhz, and flash works again. I know Flash is still beta, so not sure what is going on.
View 4 Replies View RelatedAre there any ROMs that are overclocked over 1Ghz? I am looking for one that is a nandroid file so I can make an easy swap from what I have now.
View 1 Replies View RelatedSo this article from Gizmodo (Motorola Droid 2 Photos and Specs Leaked) says that the Droid 2 has the 750mhz OMAP processor but most other sites say 1Ghz OMAP. Which is it? Girlfriend wants to go Android but I won't let her buy anything but a 1Ghz phone. What do you say?
View 18 Replies View RelatedCyanogen 5.0.5.6 with bekit 1ghz running at 40 degrees. Is this a bad combination? I'm constantly at 40 degrees. If not there, usually upper 30s. I'm hearing people are often in low 20s with their ROMs. What's the deal? I don't even play games that much, nor do I browse intense websites. Would you suggest a different kernel?
View 6 Replies View RelatedThis is the first time I have seen this. Look at the second search result. Google apparently cached specs which were posted on the Verizon Droid site at some point. It says that the Droid X will have a 1GHz processor: verizon droid x - Google Search
View 2 Replies View RelatedI am rooted and running BBV0.4 Rom and everything is great. So of course I have to try to make it better. I am looking for 1GHz kernels that work well with BBV0.4. I have seen several options in ROM Manager, but was looking for some factual data and not just fancy names.
Also I am not that familiar with the ROM Manager app, so if any one has a link or a list of steps that I can expect when updating a kernel via ROM Manager it would be greatly appreciated. I didn't see much in the way of a users guide on the Devs website.
Is it safe to do Menu>Device Selection>Show Other Frequency Sets on my Droid and run it like a Nexus One 1gHz processor? I have a stock kernel and am currently at 800mhz after the autodetect.
View 39 Replies View RelatedWith my D1. 2 days ago I was running Bugless Beast v0.5 with ChevyNo1 1.1ghz kernel. Then suddenly my market crashes, so I restore back to my factory rooted droid, when I try to install or go to reboot into recovery it says"error occured while requesting permissions". Now when I try to restore it won't even reboot the phone. Need help otherwise I'm gonna try get a D2.
View 5 Replies View RelatedCurrently I am running Blueberry Liquid Frozen Yogurt 1.6, with Slayhers 1200 Kernel. I set it up last night and I've been using it very lightly and now I have about 50% battery. Just for kicks and giggles I decided to try ChevyNo1's 1.1Ghz ULV Kernel to see what would happen as I have heard very good things about it. And when I flashed it and upon Reboot the boot animation loaded extremely slow. And when it finally got to the Droid Eye it went into the dreaded boot loop. So now I pose these questions to the Root Gurus, did I do something wrong? Should I choose another kernel? And how do I go about choosing the optimum kernel to maximize performance? With LFY 1.6 and Slayhers 1200kernel I can get a 1339 on Quadrant, and a Short Bench of 316-466, and a long bench of 579-585. And a native bench of 945.77. This is all with SetCPU set to Ondemand.
View 5 Replies View RelatedIs there a method to overclock the cliq? I tried googling it, but haven't seen a definite answer.
View 10 Replies View RelatedWe already know that the Droid X and the Droid 2 can be overclocked, but did you know that it could be overclocked... to 2 GHz? Matt4542 and Joe - members of Team DeFuse (get it? eFuse? DeFuse?) - have taken it upon themselves to crank this thing up to 2000 MHz using setCPU, their [...]
View 19 Replies View RelatedI have not really found any threads in these forums deticated just to overclocking the Droid. I am running BB v.9 and would like to overclock past 600 mhz. I have 2 overclocking utilities. (Setcpu, and overclock widget) I understand that I have to update or flash the Kernel. I tried doing this OverClocking Motorola Droid To 1.3 GHz In 7 Easy Steps | areacellphone.com
The adb commands were successfull. WHen I rebooted my droid it was bricked (well not really cause I did a Nandroid backup right before I did this) It was just frozen with the white Motorola logo. Perhaps I downloaded a bad 800 mhz evilboot8.img.
I am Using the DX/D2 overclock app and have it set to do stock with low voltage and I have to same my battery life has been way better, the only concern I have is if I am doing any damage to my phone or battery with those settings.
View 22 Replies View RelatedIve been noticing that ill set my droid overclocked to 1000mhz max and now and then ill notice that it sets itself back to 800mhz max. why does it keep doing this?
View 16 Replies View Relatedthe only thing i really want to do is overclock. i have the helix launcher and that's fine for me. none of the other features of 2.1 are that enticing. so i just want to speed it up a bit.
View 7 Replies View RelatedI just overclocked to 1.2 on cynagoen 5.062, I have overclock widget installed on my phone. Whenever I check it, the widget shows the phone is at 550, unless I manually move the slider to 1200. Does this mean my phone's not really running at 1.2, or am I misunderstanding how the overclock process works? Also, is there a way to do some sort of speed test? (I don't have set cpu and I can't buy apps at the moment) I do know when i move my slider to 1200 the web seems a lot faster, but whether thats real or placebo is beyond me.
View 7 Replies View RelatedDroid X successfully overclocked - Page 6 - Droid Forum - Verizon Droid & the Motorola Droid Forum. The file is attached to the bottom of his post, and I will attach it here as well. unzip the files and put them both on your sdcard, then run the following in adb or terminal emulator: Code:.......
View 49 Replies View RelatedWhat are all the cool things I can do now that I am finally rooted for the first time? Overclock? Other cool things?
View 5 Replies View RelatedSo I've done plenty of searching and was wondering if there was a way to overclock 2.2 and keep it after reboot.
View 15 Replies View Relatedi have setcpu, dx/d2 overclocker, and overclocking widget....which one is preferred? and i notice there are no powersave etc. options in setcpu with a droid 2
View 15 Replies View RelatedSo are all Droid X able to overclock to 1450 GHZ or at least 1250 GHZ? My phone only seems to go up to 1100 GHZ, after that it just reboots only lasts about 3 seconds after the overclock and BAM reboot. So is my phone just not capable of it or am i doing something wrong? Im running FISSION v1.2 if that matters, i got the build props from the rom manager app.
View 20 Replies View RelatedI was wondering what would happen if I tried this app on a rooted og droid? Would I land myself into a situation worse than bootlooping?
View 2 Replies View RelatedI am running stock 2.1. I do not want to downgrade and root. But, i would like to overclock. People say this is possible and to just find the app on the market. All the overclock apps i have found show that it MUST be root. Can anyone provide a link to an app that will do this? Or even the title of an app that can do this WITHOUT root?
View 3 Replies View Related