I am using the turbo4 kernel and want to flash velocity, but noticed that on the thread for V3 there is a version modified to work with v3. I don't want to sound stupid, but is that one any different from the one I have? Do I have to flash the one from the Velocity thread before I can install velocity? Just trying keep things simple and reduce the chance for errors.
View 2 Replies
Anyone running snap 7.6 kernel with turbo? I am and other than the big quadrant scores which I think have a lot to do with the read/write speed increase due to the partition, I don't notice much difference between this ROM kernel combo and any other I have tried. What is your opinion. I switched back to CM6 until MIUI MMS is working all the way around and I was lead to dialer one, which is the reason I left CM6 in the first place, I like the sense style dialer.
View 5 Replies View RelatedI figured out how to full flash the LG Ally 740 to cricket but 3 out of every 5 phones I flash do not save the NV settings. When I go to manual programming (##program740 send) then select DATA. The MIP & DUN MIP settings always revert back to the default 0000000000@vzw3g.com settings. I've changed them in LGNPST,CDMA Workshop & QPST but still reverts back to VZW. It's rooted and tried several different ROM's to fix the problem. Could it be the kernel? If anyone can help, please let me know.
View 7 Replies View RelatedAnother n00b needing some tips/assistance... I spent hours the other night trying to figure out just how to flash my LG Ally to Cricket, to no avail. I've never flashed anything to anything before, so I'm trying to understand the whole process at the same time. There's a lot of vague info on the forums about doing this on the Ally, but nothing clear, yet. I rooted my phone (thanks to amoamare's AllyRR) and tried using 3 programs to gain access to changing PRLs, etc: CDMA Workshop, LGNPST, and QPST. None of them could correctly identify my phone (and yes, I had USB debugging on). It seems to me LG has added a layer of protection to prevent using these tools. My guess is that those of you out there who know how to code (I'm not included) can use ADB Shell or something else to modify PRLs, etc. on a rooted phone.
View 2 Replies View RelatedRooted my friends ally, installed velocity, than installed dreds custom kernel. The phone isnt liking it at all. I got a nandroid backuo, but much rather flash a stock kernel before restoring back.
View 1 Replies View RelatedI have my lg Ally with the new Jit kernel (Thanks Drellisdee), with Velocity 0.2 (Thanks Trident) and am overclocking at 768 mhz. I want to apply the new update, VZB, and then put velocity and the jit kernel back. So my thoughts are that I would have to...
1.) Backup rom/Apps/Data (Titanium Backup/ROM Manager)
2.) Go into Recovery (Clockworkmod) and make a nendroid backup.
3.) Wipe Dalvik, data, and cache.
4.) Install vzb via Drellisdee's rooted update (After i check md5)
5.) Then Apply Velocity 0.2
6.) Apply the kernel
7.) Restore data from titanium backup...
Is this what I would do? What about the ally's unofficial "V9" update that has to be installed manually... Is that worth it or should I just do VZB?
Also, do I need to go to a stock rom proior to the update?
Does anyone know what kernel version I should have with the stock VZ8 or VZB?
View 2 Replies View Relateddownloaded the app but it wont run without a certain kernel.
View 7 Replies View RelatedI wanted to know if there's a way to tether with the USB cable. I currently have Velocity v0.03 w/ drellisdee's GNM Turbo 4 kernel. The WiFi tether works fine but I want a way to tether with wired so it doesn't eat up my Ally's battery. I seen this: android-wired-tether - Project Hosting on Google Code. But it requires RNDIS kernel (or whatever it is), and apparently the kernel I have loaded doesn't have this. Any other options or is there I can get the RNDIS kernal on my Ally? Yes, I realize it requires an app. I'm asking for a free alternative and NOT a paid one.
View 11 Replies View Relatedunable to flash a kernel through fastboot it's showing the device is not rooted,but in flash tool it's showing the device is rooted,even all the applications are showing root is allowed but when i'm going to flash the kernel through fastboot its showing device is not rooted...
View 5 Replies View RelatedI see a lot of video flashing Kernel using CWM on Youtube, only flash Kernel using Flashtool..
View 9 Replies View Relatedi am trying to flash velocity rom on my ally but everytime i goto rom manager it reboots my phone and when it looks like its going to go into recovery( theres a triangle and !) it just procedes to boot up like normal.
View 4 Replies View RelatedSo right now I'm running Aloysius Snow, and I can only overclock to 710. Is there a way to "flash-over" a different kernel so that I can overclock to say, 768?
View 1 Replies View RelatedI have a question for someone more tech savvy than myself. I am rooted and downgraded the Hboot because I was a leaker. ;-) I am wondering if it is possible to only update the Kernel and not flash a whole ROM? The reason I ask this is I would like to enable over clocking with just the stock Eris 2.1. Can you flash just a new Kernel?
View 4 Replies View RelatedI did a search and found no information on a similar situation. Here's what happened. I recently rooted via unrevoked 3.21, then flashed a stock rooted rom, by OMJ, his most recent ROM. I ran the phone for a day with that ROM and kernel that it came with, and everything was working good, battery life seemed good for the day. Well, I decided to flash the 4.19 netarchy kernel this evening, and after doing so, the phone got stuck in bootloop, and I had to do a battery pull. TO flash the kernel, I did this: flashed from clockwork recovery to RA 1.8. Wiped cache, wiped dalvik cache, flashed kernel from SD card, rebooted phone. Then it was just stuck in bootloop, endlessly rebooting. I pulled battery after about 25 minutes, and rebooted into Recovery, which was RA at this point. I wiped all data, cache, davlik. flashed the OMJ ROM again, flashed the netarchy kernel, rebooted. same thing. Pulled battery again, rebooted to recovery, wiped data, cache, davlik. Flashed ROM, no Kernel this time. Booted fine. went into ROM manager, flashed back to clockwork. booted to recovery. wiped data, cache, davlik. restored nandroid backup from earlier today.....
View 10 Replies View RelatedI would like to flash the Franco kernel do I need a custom ROM to do it?
Galaxy Nexus using Android
I try flashing a kernel but it show this.
FAILED (remote: The Device must be rooted first)
finished. total time: 0.001s
I already rooted my phone so what should I do?
i have a 4.0.1 yajuux build Gnex (gsm) that is rooted and i got ClockWork Recovery on it with rom manager. I want to get the Apex 1.0.2 Rom on my phone except it says i need a XXKK6 radio. How do i flash that radio? also, I want the franco kernel on it after so how would i flash that?
View 4 Replies View RelatedIm trying to flash after update.. i have rom manager and downloaded volacity and it reboots shows droid with warning sign and it just reboots and verizon logo pops up and everything is the same am i doing something wrong.. and i did wipe data
View 4 Replies View RelatedSince I am just an average Joe with all this android stuff I didn't wanna get to deep in the process of rooting my phone so I went with Unrevoked3, now since their claiming you can flash custom ROMs I was wondering if anyone knows how to accomplish this in a safe and easy way.
View 6 Replies View Relatedrooting and flashing the Sensation. I know jailbreaking very well. (this applies to apple lol )
So far I've done on Sensation is bootloader is unlocked and added clock world recovery on my mobile and I REALLY need to add Sebastain's kernel on my mobile as I need to enable USB otg for many many many reasons
I'm bit unsure on koush any kernel installer.
[URL]
just as the title said what happens if you flash kernel without unlocking bootloader?
View 2 Replies View RelatedRom Manager won't flash clockwork mod I try to flash it and eventually says program is not responding, same thing happens with the alternate recovery option. What can I do ?
View 3 Replies View RelatedFirst off you must have a 100% stock rom and be rooted.
View 24 Replies View RelatedI'm using ROM manager to flash new roms onto my ally. anything I click on (Reboot in Recovery, Install from SD Card etc) they just reboot my phone.
View 1 Replies View RelatedI am currently on the leaked 2.2 kernel. Will I have any issues if I flash 2.2 sbf to update kernel / software?
View 4 Replies View RelatedUsing ROM manager, I'm trying to flash netarchy 4. 9. 1 from SD card like other roms and kernels, but it takes me to bootloader instead and won't install the kernel. Any ideas?
View 13 Replies View RelatedMeanwhile, I've managed to root my Samsung Galaxy Y pro Duos (GT-B5512) and, recently, wanted to make something to "boost up the phone", as I'm having a problem with a missing original rom app. So... as I have to flash a new ROM, and I was thinking:
I don't know how to flash a new ROM, and I don't wanna risk making a brick f my phone. I've been reading a lot about some custom ROMs for Galaxy Y Pro Duos, but some doubts remain:
1) I've read about a compact Kernel for this phone. Should I update/ change the kernet?
2) Should I try to restore the stock ROM? Or should I go for one of the two custom ROMs I've found for B5512?
What are the advantages of putting these custom ROMs?
3) (1st kernet then ROM?) What should I do to the phone so it doesn't reboot twice a day, as it is rebooting nowadays?
how to root and flash it??? I buy it and i would like to install JellyBean 4.1
Version: 2.3.6
i9100GXXKL4
kernel v: 2.6.35.7 dpi@DELL164 #2
VErsion: GINGERBREAD.XXLB1
I have a problem with bluetooth connections:
I'm using a HTC Desire, rooted and flashed with a ROM from Alex-V Android Version 2.3.3 with the 2.6.35.8 Kernel.
I have two bluetooth devices:
MM100 Stereo Headset from Sennheiser
BT-Version: 2.0 + EDR
Protocolls: HSP, HFP, A2ADP, AVRCP
and the Hands free car kit Parrot MK6000 BT-Version: 1.2 Protocolls: HSP, HFP, AADP, AVRCP
I can pair both devices with my Desire and the latest paired device would connect automatically to audiosystem for media and telefone when switched on. The problem is, that the first paired device would not connect automatically to my desire and when it is connected manually it would only connect to the audiosystem for media not telefone. I can't force it to connect with audiosystem for telefone. I checked and un-checked the check-boxes for both connections in every combination
Remark: I don't want to connect both devices at the same time. I know that this is not working
With the original HTC Rom I doesn't had this problem. Both devices would pair and connect perfect.