how to root and flash it??? I buy it and i would like to install JellyBean 4.1
Version: 2.3.6
i9100GXXKL4
kernel v: 2.6.35.7 dpi@DELL164 #2
VErsion: GINGERBREAD.XXLB1
View 4 Replies
I have a problem with bluetooth connections:
I'm using a HTC Desire, rooted and flashed with a ROM from Alex-V Android Version 2.3.3 with the 2.6.35.8 Kernel.
I have two bluetooth devices:
MM100 Stereo Headset from Sennheiser
BT-Version: 2.0 + EDR
Protocolls: HSP, HFP, A2ADP, AVRCP
and the Hands free car kit Parrot MK6000 BT-Version: 1.2 Protocolls: HSP, HFP, AADP, AVRCP
I can pair both devices with my Desire and the latest paired device would connect automatically to audiosystem for media and telefone when switched on. The problem is, that the first paired device would not connect automatically to my desire and when it is connected manually it would only connect to the audiosystem for media not telefone. I can't force it to connect with audiosystem for telefone. I checked and un-checked the check-boxes for both connections in every combination
Remark: I don't want to connect both devices at the same time. I know that this is not working
With the original HTC Rom I doesn't had this problem. Both devices would pair and connect perfect.
how to root GT-I9100G with below spec.
PDA: I9100GDZKL3
PHONE: I9100GDZKL3
CSC: I9100GOLCKL3
Build Info: Thu Dec 22 14:58:59 KST 2011
Model: GT-I9100G
Android: 2.3.6
Baseband version: I9100GDKL3
Kernal version: 2.6.35.7
se.infra@SEI-43 #2
Build number: GINGERBREAD.DZKL3
Had tried SuperOneClick2.3.3 and DooMLoRD_v4 but both fail.
how to do the first time root~ and tell me all the step..I'm using Samsung Galaxy SII GT-i9100G
View 1 Replies View RelatedI am in a development team which develops an app used by millions of users worldwide. We get mysterious crash log messages all the time which happens only a couple dozen or even less devices which we can not directly reproduce while the vast majority of the users can use those features without problem. We suspect that in some of these cases some custom ROM or custom kernel causes the problem. Currently we get these informations from the hardware/software environment (in the parentheses there are examples from an actual crash log):
- Android version (4.0.4)
- Board version (SPH-D710)
- Brand (Samsung)
- System build number (IMM76I.FH13)
- System build ID (IMM76I)
I have a Nexus S with ParanoidAndroid, and on the About Phone page there are the extra fields I speak about (for example CyanogenMod version, ParanoidAndroid version, kernel version). My question is that is there an universal way to extract all or some of this information which could work on any device?
How to change kernel version name from about phone. I am currently on kitkat ROM. I want to change the name.
View 2 Replies View RelatedCan jellybean run on my existing kernel 2.6.35.7 version or does it need specific one?
View 3 Replies View Relatedunable to flash a kernel through fastboot it's showing the device is not rooted,but in flash tool it's showing the device is rooted,even all the applications are showing root is allowed but when i'm going to flash the kernel through fastboot its showing device is not rooted...
View 5 Replies View RelatedI see a lot of video flashing Kernel using CWM on Youtube, only flash Kernel using Flashtool..
View 9 Replies View RelatedI would like to flash the Franco kernel do I need a custom ROM to do it?
Galaxy Nexus using Android
I try flashing a kernel but it show this.
FAILED (remote: The Device must be rooted first)
finished. total time: 0.001s
I already rooted my phone so what should I do?
i have a 4.0.1 yajuux build Gnex (gsm) that is rooted and i got ClockWork Recovery on it with rom manager. I want to get the Apex 1.0.2 Rom on my phone except it says i need a XXKK6 radio. How do i flash that radio? also, I want the franco kernel on it after so how would i flash that?
View 4 Replies View Relatedrooting and flashing the Sensation. I know jailbreaking very well. (this applies to apple lol )
So far I've done on Sensation is bootloader is unlocked and added clock world recovery on my mobile and I REALLY need to add Sebastain's kernel on my mobile as I need to enable USB otg for many many many reasons
I'm bit unsure on koush any kernel installer.
[URL]
just as the title said what happens if you flash kernel without unlocking bootloader?
View 2 Replies View RelatedMeanwhile, I've managed to root my Samsung Galaxy Y pro Duos (GT-B5512) and, recently, wanted to make something to "boost up the phone", as I'm having a problem with a missing original rom app. So... as I have to flash a new ROM, and I was thinking:
I don't know how to flash a new ROM, and I don't wanna risk making a brick f my phone. I've been reading a lot about some custom ROMs for Galaxy Y Pro Duos, but some doubts remain:
1) I've read about a compact Kernel for this phone. Should I update/ change the kernet?
2) Should I try to restore the stock ROM? Or should I go for one of the two custom ROMs I've found for B5512?
What are the advantages of putting these custom ROMs?
3) (1st kernet then ROM?) What should I do to the phone so it doesn't reboot twice a day, as it is rebooting nowadays?
Is it possible to use linux version flash player plug-in on x86 for android x86 version?
View 3 Replies View RelatedI'm new to both xda and android rooting. I just want to know what's the different between Kernel and ROM? Do you need to flash to the latest Kernel to increase stability while running a certain custom ROM? I'm just a bit confused between these two and what their function
View 1 Replies View RelatedMy android is rooted and sim-unlocked by Omnius.
I manually installed ClockworkMod Recovery. (to do this I had to remount the /system folder as rw, don't know if this is important, but wasn't in the installation instructions).
PC companion says my firmware is the lastest
I want flash this kernel. I think I can't unlock my bootloader...
I followed this guide to unlock the bootloader, using FlashTool or msm7227_omniusSL.cmd. Both processes complete without errors... But when I check with s1tool, the erom version has an uppercase "R".
When I try to flash, FlashTool throws the error:
Code:
06/056/2012 20:56:22 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Here are my s1tool and FlashTool logs:
s1tool:
Code:
Welcome to S1 identify tool
[Code] .......
Both BL unlocking methods were repeted several times, with equal logs...
I've tried a lot of things to root my tablet, but they won't work all of them. Now I am searching for a couple of days around the internet, but I've still not found anything. How to root my TF101 with kernel 9.2.1.24
View 2 Replies View RelatedIs rooting mean really exploiting a Kernel vulnerability to gain root access?
If there are no vulnerabilities, no root access?
why doesn't Android allow root access by default like other Linux or windows...
How can I upgrade (a zip file, right?) my android 2.3.6 device to 4.0.3 (or later)?
I've found some obscure chinese site, but I couldn't understand anything.
My system's information:
Code:
Model Number: GT-I9100G
Android Version: 2.3.6
Baseband Version: I9100GXXKL4
Kernel Version: 2.6.35.7-g7b57e17-dirty-Lucifr_1.60uv-300Mhz
Build Number: GINGERBREAD.XXLB1
I would really REALLY like to do it via a .zip file from within CWM without having to flash my phone with a PC (as I only have Linux).
I hate the AT&T Galaxy Express i437 and I can't update the android version (currently on 4.1.2) because AT&T requires WiFi for the update. I also can't find a working root so that is not an option. Is there any way to update to a new version without rooting or WiFi?
View 1 Replies View RelatedI have a brand new GoClever Orion 70L tab and i want to root it.how to do that,
It has Android 4.2.2 version on it.
Tapatalk 2-Xperia mini
GB 2.3.4
I couldnt root my arc s, version 2.3.4, build 4.0.2.A.0.62 I've tried several methods, including the Batch on windows and the software "unlock root". It's possible to root my device by any other methods or I still have to wait to something come up?
View 1 Replies View RelatedIs there any chance to root above mentioned phone. It used gb 2.3.5 version. Micromax A87
View 9 Replies View RelatedDoes anyone know what kernel version I should have with the stock VZ8 or VZB?
View 2 Replies View Relatedsource for a 'stock ROM' for my SGS II GT-I1900G (Chinese version), for Region: Europe and Country: United Kingdom, and based on ICS.
I have been round and round this for 3 weeks now trying to find the right ROM so that my phone will work as if it was a UK phone. Mostly I find myself directed to parts of this web-site which I am them prevented from accessing because I am judged to be technically not competent (which is probably true, but not useful).
Since I have installed the [ROM][4.2.2] Slim Bean - I9100G [Build v6.0] on my device (the Samsung Galaxy SII i9100g) I'm not longer able to connect to 5ghz wifi. The issue didn't disappear till now [Build v7.0].
The last 3 days I tried different routers and settings - but there was no improvement... My online research wasn't that successful, too - I only found a decription to a problem that sounds quite similar to my issue (at [ROM][GT-I9100G][JB][4.2.2] CyanogenMod 10.1): [URL]...
i have a problem with bluetooth on galaxy i9100g after ics 4.0.4...
i cant open bluettooh ...
I just installed the 2.1 update on my child's Nabi 2. I would like to root it so that she could have some of the apps in the Google Play Store. Can I use Nabi Lab 2 to root it, or has there been an update since then? I download Nabi Lab 2, and it said in the instructions that I needed to be on version 1.9.37 so I was afraid to use it. how to root my Nabi 2 with the latest update on it.
View 9 Replies View Related