I have got a HTC EVO for myself n facing a problem with its Wi-Fi range.. As soon i get out from the room where i hav got router installed, it loses all its signals.. way to improve its range?
View 2 Replies
I have a droid and the range I get with wifi compared to a laptop is horrible. The networks I have tested on are all 802.11g. Is this just normal because of the antenna size on the droid or is there something I can do to improve it? I feel like I have to be right next to the access point to have a good connection.
View 2 Replies View RelatedMy home wireless network has always worked with my Eris until I updated to 2.1. I can get it to connect once, but after a few minutes, it disconnects and when I go into the wireless settings, I see the status as "not in range, remembered" even though I'm right next to my wireless router.
View 5 Replies View RelatedNot sure if any of you guys have the same problem but when I leave my Wifi on all day, and return home from work, my home Wifi never picks back up. When I toggle my Wifi on and off, it picks up again. My signal is always above 1 bar when on Wifi in my house, it just does NOT automatically connect anymore.
View 4 Replies View RelatedWhat is the range of wireless tether
View 2 Replies View RelatedI am initiating the design of an application that would require an Android phone to connect to another Android phone via Ad-Hoc networking with or w/o security. I would like to know if Android supports ad-hoc networking. I would also like to know what is the average range of the wifi signal from an Android handset point-to-point with no obstructions. I cannot find any information about this on the web.
View 10 Replies View RelatedI got the Hero on 3UK yesterday. As soon as I booted it up it found a number of wireless networks and I was able to connect to my BeBox with no problems. Later on last night and continuing today, it can't find any networks in range. It shows the BeBox as 'remembered' but not in range. Even tho I'm obviously sitting near it. I've rebooted the phone today and no change. I installed the Fonera application yesterday and thought it might be causing problems so disabled it and still the problem was there.
View 2 Replies View RelatedQuick background, I am still on a $30/month SERO plan with my Touch Pro 2 and waiting to get a $10/24 month discount but Sprint has put a halt to all discounts for the time being, so I'm going to try when the iPhone 4 comes out and when Verizon gets their Droid X. I was going to sell my EVO but it seems I might as well keep it since I'm going to eventually use it.
So in the meantime, I'm going to hold onto the TP2/SERO and use the EVO when I am within a WiFi network. Thing is sometimes I want to bring the EVO out, so I thought maybe I could open up a WiFi hotspot with HTC's Wifi-Router software and connect to it with the EVO. But the EVO isn't recognizing the WiFi hotspot. My laptop can recognize it though. I tried to add the WiFi network but it'll say "Not in range, remembered".
I used to know a way to dump a raw range of data (i.e. specifying start/end in hex address) from a block device which I used to do from data recovery days, but I can't remember what it is.
FYI, I am trying to grab data from an unknown range of data on the nand layout for the Xperia Play but this is a general linux/busybox question. For details on what I'm doing check here.
Did a search but couldn't see a solution. I have 3 email accounts set up. All of them work for both send and receive while connected to any WiFi. However, when not in range of WiFi I can receive emails but not send.
View 2 Replies View RelatedI got a Droid w/ Verizon December 28th 2009, and have 30 days to take it back. Should I take it back and wait for Verizon to come out with the Nexus One? I know for sure I want to use Verizon: We are in a semi-rural area, and Verizon is the only carrier that has 3g. I guess Verizon will be offering the phone SOMETIME in the spring. If I took it back, I'd have to go back to my old att phone and wait till then. One of the most important features of a phone for me is having a REALLY GOOD CAMERA built in, so I can take decent photos at any time without having to wag another box around I've read that the Droid will eventually (Jan 22?) be getting Android 2.1. DOES ANYONE KNOW if Android 2.1 Will fix the problems with the Droid's camera being a P.O.S? If Verizon would do some kind of a deal where I could keep the droid til the Nexus 1 is available with them I would, or even return the phone and use my current old unlocked phone on their network, and wait if they would give me an approx date.
View 9 Replies View RelatedI was thinking how awesome it would be to create a to-do list at home, set the location, then have it pop up when you get into the set range. Does this exist already?
View 1 Replies View RelatedDoes anyone have any dialogs that will allow a user to pick a number within a certain range? It seems like this would be a fairly common need, but I can't find a common dialog for it and I'd rather not have to spend the time creating my own. Any help?
View 3 Replies View RelatedI realize that it would probably require boosting antenna power and thus reduce battery life but, if I am prepared to accept that, can I programatically extend wifi range?
View 1 Replies View RelatedHow can I read GPS raw data, to be more specific I need the saellites pseudo range. This data is not available in NMEA format.
View 2 Replies View RelatedI am struggling from long time to get this done i know some of the solutions in sql but couldn't find any of them from sqlite.
View 3 Replies View RelatedI'm trying to create an android application which will generate random series of values (integer numbers in this case) in a given range (but NOT equal between them) and display them in a simple TextView.
View 5 Replies View Relatedknow if there's a way to select a range (such as a date, like january first to february 8) of text messages to restore? It gets annoying sitting through the restoration of thousands of text messages, when really i only need the more recent ones.
I suppose a manual workaround this would be to have the application delete messages after x days...
I recently bought Zync Z930 7" Android tablet. Everything is working fine, except for the WiFi. My router is Belkin G Wireless 40961F. The tablet finds the WiFi and connects to it and works flawlessly. But as soon as I move to upstairs, the connection is lost and it says Wifi Not in Range. I tried changing the pass from WPA to WEP and finally no password at all. Now the connection stays for more time. I tried putting "Keep On Wifi " to " Never (increases data usage) " . The connection says " Good Signal Strength ", but it keeps flashing between "Connecting " and "saved" .
Do I need to contact the vendor ? as I bought it from Ebay, I need to return it ASAP if its a hardware problem. BtW, it says the tab runs on a custom ROM.
When creating an event on Google Calendar (on the web), the option to add a repeating "range" is available. For example, you can setup an event that repeats weekly. But you can also say that the event should stop at a certain date, therefore creating a range.
I created a repeating an event from Google Calendar on my Droid, however, and the range was not an option, so I had to go to the web version later and set that from there. Did I miss someting or is that option actually not available on the Android version of Google Calendar?
I have written some app which connects to server and fetches some data. Here is the response I am getting. HTTP/1.1 416 Requested Range Not Satisfiable Content-Type: text/html Content-Length: 0 Expires: Fri, 05 Jun 2009 07:29:49 GMT Cache-Control: max-age=0, no-cache, no-store Pragma: no-cache Connection: keep-alive X-N: I am not understanding this. I just established a socket connection. I am not understanding is it my coding problem or server problem.
View 2 Replies View RelatedI need to create a random character generator that return a single character. The character should range within the letters of the alphabet, numbers 0 through 9, and some characters like.
View 3 Replies View Relatedi have a stylistic M532 tablet.insert 3g sim cart disconnect the wifi connection, and wifi display " Not in Range" message.the wifi don't connect until i eject sim cart.
View 1 Replies View RelatedI am trying to resolve following task: smooth change of brightness from 100% to 0%, but can't gain effect of smoothness. Want to emphasize that I am using following approach of brightness change. The recommended one.
WindowManager.LayoutParams lp = window.getAttributes();
lp.screenBrightness = floatPercent;
// 0 - 1 window.setAttributes(lp);
Well, it obviously works, but not smooth. I will describe logic. I have a thread that changes brightness:
while (isRunning()) { Thread.sleep(sleepTime);
spentTime+=sleepTime;
view.post(new Runnable() {
public void run() {
changeBrightness();
} } );
}
We have duration of brightness change, for example 10 seconds. I calculate next value of floatPercent (see code snippet above) the way, sleepTime should always be less than 50ms. So looks like it had to be smooth. But I always get not smooth transition. It relates specially the range of 0% - 5% of brightness. Smoothness is completely lost on this brightness range. What can you propose?
Are there any video players that can handle AVI or a full range of mpeg formats seamlessly?
View 2 Replies View RelatedI'm coming from windows mobile here so I'm not sure if this is an Android thing or the Incredible specifically, but the bluetooth implementation absolutely sucks. I'm using the phone with the Plantronics 975, which is an absolutely fantastic earpiece. The problem is that it NEVER automatically reconnects to the headset after moving out of range and then back in. I've also verified this with an old motorola headset, so the phone is the problem. With my Touch Pro 2, I could walk outside to my car to get something with the earpiece still in my ear, and the phone would disconnect and then automatically reconnect when I get back inside. Not only does the Incredible not do this, but when I come back in, even after pressing the button on the bluetooth headset (which I didn't have to do on WinMo) it just says "paired but not connected" in bluetooth settings. In order to get the phone to reconnect with the headset, I have to turn bluetooth off, back on, go into wifi settings and click "connect" EVERY SINGLE TIME I go out of range and back in range. Coupled with the infamous lack of touchless voice dialing, I am seriously dissapointed in Android's implementation of bluetooth, and don't understand how Google can put out a phone that sucks so bad as a phone - especially when in many states such as mine, a bluetooth headset is the ONLY legal way to use your phone when you drive. Any ideas how to fix this annoying problem or am I just stuck with it?
View 2 Replies View RelatedI have just recently moved from Nokia E75 to HTC Desire, and there are lots of stuff on the E75 that I will never miss... But, there are a couple of things I am missing very much, tho. One thing was a very clever feature that saved a lot of battery... On my HTC Desire I have to leave wlan enabled at all time for the phone to utilize wireless at all, and I can see that it's consuming approx 20% of the battery power - even if no apps or widgets are accessing internet.
But on the Nokia E75 it's very different... The wlan is switched off by default, so whenever an application on the E75 needs a data connection (internet), it will quickly enable wlan and check to see if there are any networks nearby it can access, and then disable it again if it doesn't find any. (If no wlan access point is detected, it will go online using the mobile data connection automatically instead)
I have a full-screen TextView holding a long Spanned that requires scrolling. The TextView's getLineCount() gives me the total number of lines used for the entire block of text but I'd like to know how many lines of text are currently visible on the screen.
Or, better yet, is there a way to figure out the range of lines currently visible on the screen? For example, as the view scrolls, can I tell that lines 20-60 are currently visible?
I have an HTC Sensation which I recently bought and seems not to get onto any Wifi Network. It pops out with Out of Range Message.
View 1 Replies View RelatedAs you know android today is many versions many constructors, many screen sizes,...
it's quite difficult for developers today to write programs that targets a big part of devices.
What would be THE developer must-know practices for this ?