I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card.
View 1 Replies
Note 3 SM-N9006 stuck on bootloop and usb debugging disabled!!!
My Samsung note 3 Sm-N9006 was already rooted when I bought it, though it doesnt have CWM/TWRP and SuperSu. However, all rooted apps are working. So I really want to change the phone's font so I downloaded Font installer *root*, because no font style is available in the settings. However, after I installed a font from the app, it prompted me to reboot my system, I clicked it and when it boots, its already stuck on the samsung logo.
Whenever I use the button combination vol down + power + home, it just opens normally; when volume up + Volume down + power / Volume up + power + home / Volume up + power, this is what is shown,,,
Select boot mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[recovery mode]
[fastboot mode]
[normal mode]
volume up moves between these options, volume down doesn't do anything, nor power button neither home button
so i can't choose from them.
I downloaded Ditto Note 3 for my note 2, and i flashed it. It didn't work so whatever. After reading on the thread a little longer, it said i needed to flash a kernel. So after flashing ditto note 3 and the kernel i rebooted my phone to see that it was stuck on the Note 2 logo. I thought it was all fine until i booted into recovery mode to find that cwm would make my phone restart. I have backups of cm11 and stock touchwiz, can i flash them with odin? Can I go into my storage and take them out?
View 2 Replies View RelatedProblem: When pressing the power button to turn phone on, there is no samsung boot logo. the only thing that shows up is a black screen, [the backlight] it will stay that way until the battery dies.
i know it's not a problem with the display because i can get to the recovery screen by pressing the three buttons. i tried numerous wipes and factory resets, even tried to reboot from there. but it still wont boot up, it only ends up with that black screen. Also the green battery shows which further indicates that it's not a display problem.
Phone Description:
Model: GT-I9500
FCC ID: A3LGTi9500
SSN:-i9500GSMH
RATED:3.85V===:13 00mA
MADE IN KOREA BY SAMSUNG
IMEI:355236030
S/N:R21D48HDDA
That's basically all i know about this phone, i know it's a clone because on the hardware differences under the hood compared to the real S4. [it's probably a legend or a superking since it's from korea i think] im not sure which operating system it runs, from the looks of it i dont think it has one.
Some things i've tried: i downloaded android SDK, MTK droid tools, SP FLash tools, for some reason, i keep getting error 8200 in sp flash tools and mtk droid tools doesn't detect my phone. I tried flash updating firmware with adb sideload, it always ends up with an error ''aborted''. i can't enable usb debugging since the phone wont turn on.
I did something stupid and tried to put the Galaxy S status bar on the D2 without realizing it is for the X. Now it's stuck in an endless bootloop. What should I do? I was trying to do the D2 2.2 SBF but how do I connect since it keeps rebooting? EDIT: Found some info online during my panic. Allowed me to start the SBF, hopefully it works. "Power on holding the power key and the Up arrow key on the keyboard. After the M logo appears, release the two keys. That will put your Droid into the bootloader, then you can connect it to your PC via USB and use the SBF post to bring your phone back to normal."
View 3 Replies View RelatedI got the phone off ebay, i knew it was rooted, but didnt know it would hurt it if i wiped everything off it, the other guys info and such. well i wiped it and now there is nothing on the phone or sd card. how do i get the phone to start working again. thanks in advance.
View 14 Replies View RelatedI am selling my old galaxy s due to having a new phone and I have made it freeze when it boots.
It was flashed onto myICS when I was using it and before handing It over I wanted to wipe everything so it was clean for the new owner. I did this in the phone options and then also in recovery mode to make sure, but after rebooting it is just stuck at the galaxy s boot loader.
I tried flash another Rom onto it and the same thing happened even though odin said it was successful.
So my galaxy note 2 is continously bootlooping. As soon as I insert the battery into the phone, it shows the galaxy note 2 screen and a couple seconds later the same. I can't enter download mode because when I click the Volume+ button to enter it, it starts from the galaxy note 2 screen.
I had flashed cyanogen mod 11 to my phone a couple months back, but it was working fine. Today morning some water got on it, but I dried it of and it was working fine.
I have a rooted Xperia C. I tried to install Chainfire 3D without knowing that it's not compatible with jellybean devices. :facepalm:
now my phone is stuck at bootloop. it's stuck at the image after the xperia logo. I tried to go to recovery mode but I can't. Maybe because my phone is bootlocked.
I managed to root and install xrecovery on my x10 mini(elcair) with flashtool. Took the next step and tried to install CWM recovery, and use it to run miniCM6.After the white sony ericsson logo disappeared, the blue android with the spinning light appeared, but now it seems get stuck here.
I tried using PC companion to restore my phone, but when my phone go into flashmode, there's a windows pop-up saying the USB driver failed to install and USB device cannot be recognized. Tried using flashtool but it doesnt work either. When i tried charging the phone with the charger, the green LED light did not light up too. I was wondering whether its hardware or software problem.
I searched the forums, looked like everyone who had this problem rooted their phones and installed custom roms, however i did not tamper with the phone in anyway, no rooting or custom rom, just nothing, this is the 3rd time in 6 weeks i get stuck in an infinite restart loop, i did two factory resets and i can't just do another one.
So far i have tried:
1-installing an antivirus and scanning (nothing found)
2-restarting in safe mode, the phone continued to restart in safe mode
3-uninstalled new apps that i installed recently
there has to be a way!!
I am relatively new to Android and last night was my first experience with flashing custom ROMs. After a couple months of reading many different articles and threads on xda and other sites, I tried to make sense of what rooting and flashing meant and was all about. I successfully rooted my device and then last night I tried to unlock the bootloader which I think I did correctly. Then, I tried to install CWM on it which I think also worked. The problems started from then: Rebooting into recovery didn't work (it only gave me a black screen) and I tried to find some solutions online. There wasn't much luck but somehow after many attempts, I was able to boot into recovery. From there, I wiped my data and settings (It wasn't factory reset before), wiped the cache, and wiped the dalvik cache which went all well I think. Then, I tried installing the latest CM10 nightly for the L7 and midway through installation, the phone just rebooted itself. And now, it's stuck on bootloop. I tried many different things and even formatted the system which I think made it worse.
The Quick Details:
-LG P705G (Canada, Fido) was running stock ROM V10e i think
-was rooted
-i think bootloader was successfully unlocked
-stuck on bootloop
-formatted the system and now only LG logo appears when I boot (no CM logo)
I recently got a Huawei y220 and rooted it and enabled USB debugging, tweaked the SystemUI.apk and it all went good, I had no problem rebooting. I also changed my bootscren with BootScreen from the Play Store.
But today, my phone got stucked in bootloop, and i know why, I changed the /system/fonts permissions to 666, and also when I was trying to change the default font (DroidSans.tttf and DroidSansBold.ttf) copied a font file, so in that folder there was some permissions changed and an extra font. I had to to do something so i locked my phone. When I returned a couple of minutes later the phone was like off, so i removed the battery and rebooted it. It got stucked on my boot screen, and didn't showed me my ADW launcher.
I can't install CWM as there is no file for this model (because it's very new), I can't flash anything as far as I know. Tried downloading the official "upgrade" from Huawei, copied the file, but I can't seem to enter the "Software Upgrade Mode", (VOL UP + VOL DOWN + POWER KEY), I press those keys for about a minute and nothing happens.
I know my phone isn't fully bricked, for now, so, how can I change those file permissions through my PC or Linux? I can enter the bootloader screen.I also tried AromaFM, but i get a signature error.I've already wiped/factory reset and wiped cache.
my phone is stuck in a bootloop. I can restore factory setting, but first i want to back up my data, specifically my text messages. They are very important. Is there a way i can do that ?
the bad news is Im not rooted. now im trying to find ways to save data from my the phone before i do a factory reset.
My Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again.
So, my phone is stuck in a boot loop. I can restore factory setting but first i want to back up my data .. specifically my text messages and pictures. They are very important. Is there a way i can do that ?
the bad news is Im not rooted. now im trying to find ways to save data from my the phone before i do a factory reset.
I froze some Google apps and did a factory reset without unfreezing them. I now get stuck in a boot loop every time I try to start the device. flashing system.img, boot.img, and recovery.img for this phone? I can't do it through the system recovery (power + vol down) because of signature verification. I can't do it through FTM (power + vol up) either. My Supreme is pretty much a brick right now. I only resort to this because I'm unable to rename the .bak to .apk through adb because of a read-only file system. The phone has no fastboot mode, either.
View 3 Replies View RelatedAOKP JB Milestone 1 on Galaxy S3
Build worked fine for a month or so. Then my battery died last week and upon reboot, it got stuck on Initiating Swagger screen. Tried wiping the cache, the dalvik cache and battery stats with no luck. Finally just factory reset and booted a new identical aokp download. A week went by and everything seemed peachy until the battery died again and I got the same problem.
I repeated the process again but really want to be sure this doesnt happen again.
I forgot to wipe data/factory reset before unrooting my samsung galaxy s2.
Now, it's stuck in a bootloop and I can't access Clockworkmod recovery even after installing it from Odin.
I would like to turn on Android 4.0 USB Debugging from Windows 7 because my touchscreen is NOT working (due to a bad ROM, not hardware failure). Without this, I cannot Root and Flash a different ROM.
View 8 Replies View RelatedI already had a custom kernel to jumped to the stage where we have to flash the kernel and forgot to turn the USB debugging on. My backups not getting restored, its all jumbled.
Recovery is working perfectly though. The screen just shows that nAa "freedom within" freezes there.
I did a search and found no information on a similar situation. Here's what happened. I recently rooted via unrevoked 3.21, then flashed a stock rooted rom, by OMJ, his most recent ROM. I ran the phone for a day with that ROM and kernel that it came with, and everything was working good, battery life seemed good for the day. Well, I decided to flash the 4.19 netarchy kernel this evening, and after doing so, the phone got stuck in bootloop, and I had to do a battery pull. TO flash the kernel, I did this: flashed from clockwork recovery to RA 1.8. Wiped cache, wiped dalvik cache, flashed kernel from SD card, rebooted phone. Then it was just stuck in bootloop, endlessly rebooting. I pulled battery after about 25 minutes, and rebooted into Recovery, which was RA at this point. I wiped all data, cache, davlik. flashed the OMJ ROM again, flashed the netarchy kernel, rebooted. same thing. Pulled battery again, rebooted to recovery, wiped data, cache, davlik. Flashed ROM, no Kernel this time. Booted fine. went into ROM manager, flashed back to clockwork. booted to recovery. wiped data, cache, davlik. restored nandroid backup from earlier today.....
View 10 Replies View RelatedI rooted and side loaded my phone today. I go to turn of USB Debugging and the green check will go away as soon as the leave the screen it turns back on.
View 5 Replies View RelatedI was trying deodexing manually and ran into big problems, now in bootloop. I want to just custom recovery restore to the deodexed ROM here (Droid X 2.2 Froyo Deodexed and Ready For Themes) but cannot because I get the following error every time I try to restore a backup from custom recovery: "e:Can't mount /dev/block/mmcblk0 device or resource busy.I think I found out that it is because this Koush recovery is the original 2.1 version, so I need the 2.2 one.Two things:-Where do I get this 2.2 newer version? His site doesn't mention it but maybe he just replaced the file download without mentioning? http://www.koushikdutta. com/2010/08/droid-x-recovery.html)-How can I install this newer recovery if I am stuck in bootloop?
View 12 Replies View RelatedI googled everywhere and couldn't find the correct answer for my problem. I pulled a pinheaded move by after rooting my phone, I wanted to put teenface's black notification bar. I put the 2 files from the zip (into my SDcard. I turned off my phone and now I am stuck in a boot loop.
View 1 Replies View RelatedSorry if I'm posting this in the wrong area, but can anyone tell me how to turn off USB debugging please? I'm using VillainROM 5.4.0.
View 2 Replies View Relatedmy phone is stuck in a bootloop. and its Not rooted. all i can do is go to the boot menu. I want to use ADB to see if i can read the phone data (like sms...). Is there any chance that the device will be recognized when i connect it to the PC by usb with ADB?? or is it impossible? maybe ADB needs the phone to be operating normally to be recognized.
View 9 Replies View RelatedThis is really minor, but it's annoying to me to have an icon in my notification bar up top that USB debugging is connected. I realize I have to have the USB debugging option checked in settings, but it's annoying that this notification icon appears whenever I plug the phone into the computer.How do I disable this icon?
View 9 Replies View RelatedI cant turn my tablet off or get it to work it is stuck on the screen saver,what do I do
View 7 Replies View Relatedhow to turn on USB debugging on when in recovery mode?I got CWM on my galaxy nexus (was running android 4.2.2)
I'm stuck in a reboot loop and can't get my galaxy nexus detected by my computer (when connected via USB). I feel like if I could get it to turn USB debugging on, I can then sideload and try to recover from this.